MSSC - Manufacturing Processes, Production
Questions with Accurate Solutions
____ is a planning tool that expands MRP to include other departments in planning
production. - MRPII
______ are used to life the work piece off the bottom of the vice. - Parallels
______ includes any materials that have been issued to a manufacturing order that
have not been produced into a finished product. - Work-in-progress inventory
______ saves a company money because it reduces the cost associated with
maintaining a large inventory of items. - JIT
A ____ is mounted on a shaft by means of a key. - cam
A ______ is a list of all the materials and components required to make the product and
the quantity of each. - bill of materials
A ______ linkage changes rotary motion into reciprocating (back and forth) motion. -
slider crank
A ______ punch is used to create a very small indentation. - prick
A built-up edge condition of a cutting tool causes it to ______. - cut more deeply
A cam is a wheel that, when combined with a cam follower, produces a(n) ______
motion. - reciprocating
A counterbore ______. - enlarges a hole for a portion of its depth
A counterbore has a ______. - pilot
A counterbore should be ______ larger than the head of the socket to be used. - 1/64"
A drill press will under-size the holes if the ______. - drill bit has a worn margin
A force that makes an object rotate about a point is called ______. - torque
A frequency chart is typcally used to establish ______. - sampling plans
A process's ______ is the rate at which a production system creates a finished product.
- capacity
