1 /
1
NCCER Module 9 (material Handling)
1.
before
attempting
to
lift
any
materials?:
make sure the load does not have
perusing nails wires
or sharp edges
2. before attempting to lower an overhead load?: size up the load
3.
what is the proper procedure to lift objects:
bend knees and get a good grip,
lift with legs keep
back straight and head up
4. when stacking bags of material that are the same width, step back
and cross
key the bags?: every 10 bags high.
5.
never stack or store materials?: on scaffolds or
runways
6. the know shown in the figure above is a?: clove hitch
7.
one common way to tie
a clove
hitch is to use two?: Half hitches in
opposite
directions
8. when moving a material cart on an incline or decline surface, be sure
the?: load
does not exceed the labeled weight capacity
9. to transport a bottle of compressed gas, use a: Cylinder cart
10.
what device may have a rotating surface and/ or spikes on
the table surface
for a better grip?: roller skids
11. to work with motorized material handling equipment, a worker
must be?: -
trained, certified and authorized
12. how is the fall zone for a forklift operation best defined?: any area
into which the lifted
materials could potentially fall
13. to prevent tip overs when driving a rough terrain forklift, keep
the load?: carry
the load low
14.
when
using
hand
signals always?:
maintain
eye
contact
with
the
operator
15.
the forklift hand signal for dog everything mean:
to pause
