NCCER study guide Module 1 Basic Safety Questions and Answers 100% Pass 2026, Exams of Workplace Safety

Companies with strong safety cultures usually have lower _ . - turnover Safety is a learned behavior and attitude. T/F - TRUE Poor lighting, excessive noise, inadequate guards for moving parts are examples of _ _. - unsafe conditions The activity that consists of breaking a job into its component task and then analyzing each step for potential hazards is called _ _ _ . - job safety analysis

Typology: Exams

2025/2026

Available from 06/04/2026

AVIANNA-NOTES-A-PASS
AVIANNA-NOTES-A-PASS 🇺🇸

1.4K documents

1 / 4

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
NCCER study guide Module 1 Basic Safety
Questions and Answers 100% Pass
Companies with strong safety cultures usually have lower _ . - ✔✔turnover
Safety is a learned behavior and attitude. T/F - ✔✔TRUE
Poor lighting, excessive noise, inadequate guards for moving parts are examples of _ _. - ✔✔unsafe
conditions
The activity that consists of breaking a job into its component task and then analyzing each step for
potential hazards is called _ _ _ . - ✔✔job safety analysis
The measure of probability, consequences, and exposure related to an event is referred to as _ . -
✔✔Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to _
_ _ _ _ _ _ . - ✔✔cover the opening and label the cover
The D-ring or support point on a safety harness should be placed _ _ _ _ _ _ . - ✔✔in the middle of the
back
A personal fall arrest system should be inspected monthly by a _ _ . - ✔✔competent person
pf3
pf4

Partial preview of the text

Download NCCER study guide Module 1 Basic Safety Questions and Answers 100% Pass 2026 and more Exams Workplace Safety in PDF only on Docsity!

NCCER study guide Module 1 Basic Safety

Questions and Answers 100% Pass

Companies with strong safety cultures usually have lower _. - ✔✔turnover Safety is a learned behavior and attitude. T/F - ✔✔TRUE Poor lighting, excessive noise, inadequate guards for moving parts are examples of _ _. - ✔✔unsafe conditions The activity that consists of breaking a job into its component task and then analyzing each step for potential hazards is called _ _ _. - ✔✔job safety analysis The measure of probability, consequences, and exposure related to an event is referred to as _. - ✔✔Risk If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to _ _ _ _ _ _ _. - ✔✔cover the opening and label the cover The D-ring or support point on a safety harness should be placed _ _ _ _ _ _. - ✔✔in the middle of the back A personal fall arrest system should be inspected monthly by a _ _. - ✔✔competent person

Lanyards that have no shock-absorbing features are used for _. - ✔✔positioning When placing a ladder against a platform or roof, the top of the ladder should extend above the point where the ladder touches the platform or roof by at least _ _ _. - ✔✔3 feet (91 cm) When performing overhead work on scaffolding, _ , _ _ , or _ must be applied as protective measures to prevent objects from falling and striking a person below. - ✔✔Toeboards, debris nets, canopies When stacking materials such as bricks or blocks, do not stack materials beyond a _ _ _ _ _. - ✔✔4: height-to-base ratio Benching systems are prohibited in _ _ _. - ✔✔Type C Soils In the absence of other information, all soil in an excavation should be treated as if is _ _. - ✔✔Type C Daily inspection of an excavation must be performed by a _ _. - ✔✔competent person One of the most common grounding systems used for protection against accidental electrical shock is the _ _ _. - ✔✔three-wire-system The type of permit that must be issued before a permit-required confined space can be accessed is called _ _ _. - ✔✔an entry permit A polarized electrical receptacle is used for _ _ _. - ✔✔double insulated tools

When there is the potential to be exposed to asbestos, workers must _ _ _ _ _ _ _ _ _. - ✔✔report it to the supervisor and avoid disturbing it One source of lead on some job site is _. - ✔✔paint The respirator that would be used where dust or solid particles might be inhaled is a _ _ _ _ _ _ _ _. - ✔✔half mask or mouthpiece with a mechanical filter