NCCER study guide Module 1 Basic Safety Questions, Exams of Safety and Fire Engineering

NCCER study guide Module 1 Basic Safety Questions

Typology: Exams

2025/2026

Available from 02/02/2026

KattyJennifer-1
KattyJennifer-1 🇺🇸

5

(2)

6.1K documents

1 / 2

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
1 / 2
NCCER study guide Module 1 Basic Safety Questions and Answers
Companies with strong safety cultures usually
have lower _ . - -turnover
Safety is a learned behavior and attitude. T/F -
-TRUE
Poor lighting, excessive noise, inadequate
guards for moving parts are examples of _ _. -
-unsafe conditions
The activity that consists of breaking a job into its
component task and then analyzing each step for
potential hazards is called _ _ _ . - -job
safety analysis
The measure of probability, consequences, and
exposure related to an event is referred to as _ .
- -Risk
If there is a hole in the floor of a structure, the
preferred method of protecting workers from falls
is to _ _ _ _ _ _ _ . - -cover the opening
and label the cover
The D-ring or support point on a safety harness
should be placed _ _ _ _ _ _ . - -in the
middle of the back
A personal fall arrest system should be inspected
monthly by a _ _ . - -competent person
Lanyards that have no shock-absorbing features
are used for _ . - -positioning
When placing a ladder against a platform or roof,
the top of the ladder should extend above the
point where the ladder touches the platform or
roof by at least _ _ _ . - -3 feet (91 cm)
When performing overhead work on scaffolding,
_ , _ _ , or _ must be applied as protective
measures to prevent objects from falling and
striking a person below. - -Toeboards,
debris nets, canopies
When stacking materials such as bricks or
blocks, do not stack materials beyond a _ _ _ _ _.
- -4:1 height-to-base ratio
Benching systems are prohibited in _ _ _ . -
-Type C Soils
In the absence of other information, all soil in an
excavation should be treated as if is _ _ . -
-Type C
Daily inspection of an excavation must be
performed by a _ _ . - -competent person
One of the most common grounding systems
used for protection against accidental electrical
shock is the _ _ _ . - -three-wire-system
The type of permit that must be issued before a
permit-required confined space can be accessed
is called _ _ _. - -an entry permit
A polarized electrical receptacle is used for _ _ _
. - -double insulated tools
_ _ _ fire extinguisher would be used on an
electric motor that has overheated and caught
pf2

Partial preview of the text

Download NCCER study guide Module 1 Basic Safety Questions and more Exams Safety and Fire Engineering in PDF only on Docsity!

1 / 2

NCCER study guide Module 1 Basic Safety Questions and Answers

Companies with strong safety cultures usually have lower _. - - turnover Safety is a learned behavior and attitude. T/F -

  • TRUE Poor lighting, excessive noise, inadequate guards for moving parts are examples of _ _. -
  • unsafe conditions The activity that consists of breaking a job into its component task and then analyzing each step for potential hazards is called _ _ _. - - job safety analysis The measure of probability, consequences, and exposure related to an event is referred to as _.
    • Risk If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to _ _ _ _ _ _ _. - - cover the opening and label the cover The D-ring or support point on a safety harness should be placed _ _ _ _ _ _. - - in the middle of the back A personal fall arrest system should be inspected monthly by a _ _. - - competent person Lanyards that have no shock-absorbing features are used for _. - - positioning When placing a ladder against a platform or roof, the top of the ladder should extend above the point where the ladder touches the platform or roof by at least _ _ _. - - 3 feet (91 cm) When performing overhead work on scaffolding, _ , _ _ , or _ must be applied as protective measures to prevent objects from falling and striking a person below. - - Toeboards, debris nets, canopies When stacking materials such as bricks or blocks, do not stack materials beyond a _ _ _ _ _.
    • 4:1 height-to-base ratio Benching systems are prohibited in _ _ _. -
  • Type C Soils In the absence of other information, all soil in an excavation should be treated as if is _ _. -
  • Type C Daily inspection of an excavation must be performed by a _ _. - - competent person One of the most common grounding systems used for protection against accidental electrical shock is the _ _ _. - - three-wire-system The type of permit that must be issued before a permit-required confined space can be accessed is called _ _ _. - - an entry permit A polarized electrical receptacle is used for _ _ _ . - - double insulated tools _ _ _ fire extinguisher would be used on an electric motor that has overheated and caught

2 / 2

NCCER study guide Module 1 Basic Safety Questions and Answers

fire. - - A Type C A system that protects workers from the release of hazardous energy while they work with machines is referred to as _ _. - - lockout/tagout When other workers are working near a welding operation, the standard practice is _ _ _ _ _ _ _ _

. - - to screen the work area with welding shields In a lockout/tagout situation, a personal lock and tag must be removed by _ _ _ _. - - the person who applied them _ _ is a condition that is life threatening. - - Heat Stroke Hard hats should be made of fiberglass or _ _. - - reinforced plastic Heat exhaustion differs from heat stroke in that _ _ _ _ _. - - the body temperature rises slightly A good general rule about hearing protection is that if you must raise your voice for someone to hear you when they are _ _ _ _ _. - - 2 feet (61 cm) away Hepatitis can be caused by contact with _. - - blood When there is the potential to be exposed to asbestos, workers must _ _ _ _ _ _ _ _ _. - - report it to the supervisor and avoid disturbing it One source of lead on some job site is _. -

  • paint The respirator that would be used where dust or solid particles might be inhaled is a _ _ _ _ _ _ _ _. - - half mask or mouthpiece with a mechanical filter