NEIEP 100 Final Exam Version 2 | Elevator Electrical & Mechanical Concepts, Exams of Nursing

A second full version of the NEIEP 100 Final Exam featuring additional practice questions on elevator electrical circuits, motor controls, schematics, fuse/overload protection, safety codes, multimeter readings, resistive and inductive loads, hoistway components, and mechanical system fundamentals. Provides alternate exam scenarios to strengthen apprentice readiness. NEIEP exam version 2, elevator controls study, motor control questions, wiring schematic practice, elevator mechanical basics, apprentice exam prep, electrical trade study set

Typology: Exams

2025/2026

Available from 11/20/2025

steve-roger-5
steve-roger-5 🇺🇸

315 documents

1 / 20

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
1 / 9
NEIEP 100 Final Exam
Questions and Verified Answers
100% Guarantee Score Pass
Consist of 100 Questions and Answers
1. You are about to step to a car top. After activating the top of car stop switch and the
inspection switch, what is the next step to verify that they work?
Ans>> Close the hoist way doors and set up a hall call
2. What safety device might you encounter in a hydraulic elevator pit?
Ans>> Plunger gripper
3. What is the most serious consequence of incorrect lifting?
pf3
pf4
pf5
pf8
pf9
pfa
pfd
pfe
pff
pf12
pf13
pf14

Partial preview of the text

Download NEIEP 100 Final Exam Version 2 | Elevator Electrical & Mechanical Concepts and more Exams Nursing in PDF only on Docsity!

NEIEP 100 Final Exam

Questions and Verified Answers

100% Guarantee Score Pass

Consist of 100 Questions and Answers

  1. You are about to step to a car top. After activating the top of car stop switch and the inspection switch, what is the next step to verify that they work? Ans>> Close the hoist way doors and set up a hall call
    1. What safety device might you encounter in a hydraulic elevator pit? Ans>> Plunger gripper
    2. What is the most serious consequence of incorrect lifting?

Ans>> Spinal injury

  1. What is called the "silent killer" Ans>> The counter weight
  2. A mechanic needs to ride on the car top, but a top-of car operating device is not available. What should the mechanic do? Ans>> Establish communication with a qualified person in the car
  3. You are about to perform routine maintenance on an elevator. After apply- ing a lock and a tag, what step should you take? Ans>> Verify no power with appropriate test equipment
  4. When does ASME A17.1 require a pit ladder to be installed? Ans>> When pit depth exceeds 35"

Ans>> Your mechanic

  1. What are the two most common causes of accidents to members of the general public on elevators? Ans>> Trips and falls, and being struck by the doors
  2. Before shortening a governor rope, what safety steps should be taken? Ans>> - LOTO and support tension sheave
  3. Which of the following is a term used to describe a body harness used in conjunction with a shock absorbing lanyard? Ans>> Personal fall arrest system
  4. A mechanic is working on a construction job, and finds the carpenter using a powder activated tool to anchor wall track. Of the following, which precaution should the mechanic take?

Ans>> Wear hearing protection

  1. Which is the best way to communicate with your coworkers while you are in the machine room and they are working in the pit? Ans>> Two-way radio
  2. A mechanic hurts their back while lifting a heavy box. A doctor diagnoses a "strain". What type of Injury did they sustain? Ans>> Muscle stretched beyond limits

barriers be installed? Ans>> When hoistway door will be open more than 5"

  1. When is public safety an elevator constructors responsibility? Ans>> During all work-related activities
  2. When carrying a screwdriver in your pocket on a car top, what safety factors must be considered? Ans>> It doesn't matter; you should never carry a screw driver in your pocket
  3. You are ordering wood planking to provide overhead protection for a temporary working platform. At a minimum, how thick must the wood be? Ans>> 2"
  4. Which organization' s code prohibits storing anything on top of the car?-

Ans>> ASME

  1. You are modernizing an elevator where the Public is present. What are the barricade requirements? Ans>> Solid barricade at least 8' high, fully enclosing the work area
  2. Why did the elevator mechanic direct the apprentice not to run gasoline generator in an enclosed parking garage? Ans>> The risk of exposure to Carbon Monoxide fumes
  3. A mechanic is checking the condition of the belts on a hydraulic elevator. When is it safe to check the tension? Ans>> After locking out and tagging out the mainline
  4. When using power tools in older buildings without ground led outlets, what precaution must you take? Ans>> Verify a positive ground and use an adapter plug with grounding wire
  5. In the elevator industry, why are fiberglass ladders the most common type of
  1. What must elevator constructors do before using chemical solutions or cleaning fluids? Ans>> Read SDS
  2. You are asked to install additional lighting in the hoistway. What type of extension cord should you use? Ans>> Three-wire
  3. In which type of conveyance system is the energy applied by means of a liquid under pressure? Ans>> Hydraulic elevator
  4. Refer to the figure. An apprentice is setting up a ladder to access a landing 12 feet above his level. What is dimension B? Ans>> 3 feet
  5. Prior to using the elevator car sling as a running platform, what must be operational and tested? Ans>> Governor and safeties
  6. Which entity requires all employees be given information and training on the long and short term health effects of the chemicals they work with? Ans>> OSHA
  1. What type of fire extinguisher is required in the machine room? Ans>> ABC
  2. When moving heavy parts or machinery, which if the following is most important? Ans>> Establishing good communication with coworkers
  3. What size must a dumbwaiter cab enclosure be to transport people? Ans>> - Dumbwaiter s may only transport materials, not people
  4. While working on a moving walk, where are barriers required? Ans>> At the points embarkation and disembarkation
  5. At which point on the lifeline should your lanyard be attached? Ans>> Above your shoulder
  6. A construction crew arrives to work on Monday morning and finds the overhead machine room floor is being poured. What precautions shoot be taken? Ans>> Avoid working in the hoistway
  7. What are 2 types of mechanical drawings used in elevator installations? Ans>> - Layout drawing, detail drawing
  1. You must order enough wire to complete installation of a duplex. Where would you find the information that would determine how much wire is need- ed? Ans>> Electrical layout
  2. In the metric system, how is the measurement of volume identified? Ans>> Liter
  3. Refer to print 1. Which view shows the pit depth? Ans>> A. Elevation view
  4. You are installing rails in a new building. Which drawing will you refer- ence? Ans>> Rail installation detail drawing
  5. What part of the job folder would contain information regarding elevator speed, capacity, and loading class? Ans>> Abstract
  6. When replacing typical rollers on guides, what is the appropriate tool and fastener to be used? Ans>> Snap ring pliers/ snap rings
  7. What method should an elevator constructor use to check the well hole depth?

Ans>> Drop a weight led line to the bottom and measure the line

  1. What is the simplest locking device used to prevent loosening due to vibrations? Ans>> Jam type nuts
  2. When installing pipe, what type of threads would you use to create a proper seal? Ans>> Pipe threads
  3. What information is typically provided in a job folder? Ans>> Contract speed, car platform thickness, machine groove type
  4. In a mechanical drawing, which symbol would refer to diameter? Ans>> Zero with a line through it
  5. Where would an elevator constructor find information pertaining to plat- form dimensions? Ans>> Final layout
  6. Which of the following terms describes and architectural drawing that shows three sides at once? Ans>> Three-dimensional drawing
  7. You're helping a mechanic disassemble a hydraulic control valve. Of the following, which drawing would be the most helpful to reference?
  1. Mounting specifications for a governor call for plain lockwashers. Which type is required? Ans>> Cut washer
  2. Where is the "drop of governor to car" measurement taken from? Ans>> Center- line of main rails
  3. What is the front or side view drawing of a hoistway called? Ans>> Elevation view
  4. You are installing a bearing on a fearless machine with a class #7 fit. Which two items are necessary for this to e adequate? Ans>> Dry ice and bearing heater
  5. Which document shows all major parts of an installation Ans>> Final layout draw- ing
  6. Door rollers can be held in place with through bolts. What other means of attachment can accomplish this? Ans>> Snap rings
  7. Elevator constructors should only use which type of drawings? Ans>> Final and approved
  1. When installing an escalator, what is the most common type of measure- ment system used? Ans>> Metric
  2. On the plan drawing, the main guide rails are shown in relation to the location of what? Ans>> Column line
  3. What is the acceptable tolerance (in inches) for the installation of guide rails on a job where the layout drawing does not specify a maximum or minimum dimension? Ans>> Plus or minus 1/64"
  4. What needs to be done prior to surveying the hoistway? Ans>> Install plumb line
  5. With regard to prints, what is another term for arias view? Ans>> Plan view
  6. What is the term for viewing an object straight on from many sides, with each side being at right angles to its adjacent side? Ans>> Orthographic projection
  7. What dangerous gas is given off by a running gasoline engine?
  1. Why must you place a hydraulic elevator car on support posts before servicing the packing head? Ans>> Because a hydraulic elevator is supported by a column of oil
  2. What is the lowest amount of electrical current that can be fatal? Ans>> 0.005 amperes
  3. How do you determine the correct angle from the vertical for placing a ladder? Ans>> Measure out a distance of 1/4 the height
  4. Where would you find hoistway access switches mounted? Ans>> At a terminal landing
  5. What is the safest way to lubricate hoist ropes? Ans>> With a rope lubricator
  6. What device must be in working condition in order to use an elevator car sling as a running platform Ans>> The governor and safeties
  7. Many older buildings contain fireproofing materials made of which haz- ardous substances? Ans>> Asbestos
  1. What are the three levels of reaction to an electrical shock? Ans>> Perception, surprise, freeze
  2. What is the first thing you must do before performing any service on an escalator? Ans>> Place barricades at the upper and lower ends
  3. What are the two most obvious dangers in the machine room? Ans>> Electricity and moving machinery