Rope Tech questions and answers final exam, Exams of Advanced Education

Rope Tech questions and answers final exam

Typology: Exams

2024/2025

Available from 05/07/2025

studyroom
studyroom 🇺🇸

4.2

(5)

6.1K documents

1 / 7

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
Rope Tech questions and answers final exam
What is the NFPA safety factor for rope? - 15-1
Keeping in mind the NFPA safety factor for a two person load, how much must each
component be rated for - 9000 pounds
One kilo-newton is equal to - 225 pounds
What is the rated breaking strength for 1" flat webbing - 6 thousand pounds
What is the rated breaking strength for 1" tubular webbing - 4 thousand pounds
What does kermantle mean - The type of life safety rope we use
What is the rated breaking strength of a G steel carabiner - 40 KN
How many basket handlers for low angle evacuation - 6
How many basket handlers for steep angle rescue - 3
How many basket handlers for vertical rescue - 1
List two main concepts of a high D - Edge protection
Easier transition
What is the purpose for interlocking long tail bowlines - Redundant safety
pf3
pf4
pf5

Partial preview of the text

Download Rope Tech questions and answers final exam and more Exams Advanced Education in PDF only on Docsity!

Rope Tech questions and answers final exam What is the NFPA safety factor for rope? - 15- Keeping in mind the NFPA safety factor for a two person load, how much must each component be rated for - 9000 pounds One kilo-newton is equal to - 225 pounds What is the rated breaking strength for 1" flat webbing - 6 thousand pounds What is the rated breaking strength for 1" tubular webbing - 4 thousand pounds What does kermantle mean - The type of life safety rope we use What is the rated breaking strength of a G steel carabiner - 40 KN How many basket handlers for low angle evacuation - 6 How many basket handlers for steep angle rescue - 3 How many basket handlers for vertical rescue - 1 List two main concepts of a high D - Edge protection Easier transition What is the purpose for interlocking long tail bowlines - Redundant safety

What is the rated breaking strength for 1/2" kermantle rope - 9 thousand pounds What is block-creel construction - Every fiber in rope goes from one end to the other What must be In the core of every NFPA rated rope - Tracer tag Min. Number of wraps and fraps when building bi-pod with 4x4's - 3 each What type of rope do we use for rope rescue systems - Static kermantle What device will allow you to change from a loaded haul system to a lower - MPD/load release hitch On a Load release hitch the figure eight should go on the_______ side and the Munter hitch should go on the ________ - Load, anchor What does PCD stand for - Progress capture device, located at the first pulley A ________ S.S.S.F translates to about a________ dynamic event S.F - 10-1, 2- What does SSSF stand for - Static system safety factor In a kooteny high line system the steering lines (tag line) also serve another function. What is it? - Belaying the track line Is it acceptable to use the same high d for main line and belay - No What tie do we commonly use use if it must be tied under a load? - 1/2 hitch and over hand safety

Length of black webbing - 25' What do NFPA "P" and "G" stand for in reference to carabiners - P- personal G- general use Name two midline knots. Which one can be loaded either way - Butterfly (loaded either way) Directional eight What is a class || harness - Seat harness What is a class ||| harness - Full body harness Is it appropriate to combine and sewn seat harness with a tied webbing chest harness - Yes Where should the main litter harness attachment point be over the patients body for a horizontal raise - Naval Which lower or rappel device can you vary the friction once loaded - Rack What is the purpose of a mono pod - High d What harness does NFPA require for rope rescue? - Class ||| You have one high directional, which line should it support - Main line How far from the edge can you be with out needing a travel limiter - 20'

True or false: a guiding line should only be as tight as necessary to keep the rescuer and patient just off of the cliff, tree, or other obstacle - T True or false: a guiding line should be tensioned as much as possible to avoid objects by a wide margin - F True or false: friction is the only difference between ideal mechanical advantage and actual mechanical advantage - T What happens when any mechanical ascender is shock loaded/over loaded on a rope - May cut the rope Must be taken OOS How should the carabiner be loaded every time - Along the spine You were breaking down a lowering system and find that the collet on a carabiner Is stuck, how should you open the carabiner - Re-load it When would a high strength tie off be necessary - When you the the full strength of the rope What is a bend - Tying to ropes together What is a hitch - Used to secure a object but once the object is removed so does the hitch Is it safe to side load a carabiner - No Is it safe to load a carabiner along its spine - Yes What % of kermantles strength comes from its core and sheath - 80% core 20% sheath

Do rescue ropes loose any strength when wet - Yes Which has less strength loss when making a tight bend, such as around a carabiner, 1/2" rope or 1" flat webbing - 1/2" rope Describe a Spanish windlass and what it is used for - To tie back pickets What does MPD stand for - Multi purpose device What are three major functions can and MPD be used for - Lowering, ratchet pulley, and a belay device