

Study with the several resources on Docsity
Earn points by helping other students or get them with a premium plan
Prepare for your exams
Study with the several resources on Docsity
Earn points to download
Earn points by helping other students or get them with a premium plan
Smog Test---------------------Smog Test
Typology: Exams
1 / 2
This page cannot be seen from the preview
Don't miss anything!


all of the following vehicles are exempt from a smog check inspection , except - correct answer Rotary powered vehicles Technician A states the BAR 97 EIS may be used outside the station building when inspecting a heave-duty vehicle, such as motorhome. Technician B states the EIS shall not be used outside the station building but may be connected to a large vehicle located outside the building. who is correct - correct answer Tech B the under-hood emission label states that the ignition timing is 8 BTDC, and the ignition timing is adjustable. Under which of the following conditions will this vehicle fail the functional inspection? - correct answer The ignition timing check reads 2 BTDC What type of identification is required on all CARD-approved aftermarket emissions components? - correct answer executive order (EO) number A Vehicle has failed the Crankcase visible smoke test" during the smog check inspections. how should the Technician proceed? - correct answer All of above a Technician is going the conduct the visual inspection portion of the smog check inspection. upon opening the hood, he/she notices the vehicle has no under-hood label present. what action should the technician take as result of this finding? - correct answer Use the ECS manual or BARD approved reference material to determine the emission components for the vehicle the under hood emissions label states that ignition timing is "non-adjustable" the label also reads that timing specification is 12 BTDC. What is the correct procedure to follow? - correct answer Enter the timing as "not applicable" (N/A) A vehicle arrives for a smog check inspection. While running the Tailpipe Emission portion of the inspection, the MIL light comes on. Which step should the Technician follow? - correct answer Enter "pass" during the MIL Functional Test if the MIL operates correctly when prompted by the BAR-97 EIS
during the Visual inspection, the Technician notices that the vehicle has a non-OEM aftermarket carburetor installed. What is the correct procedure the inspect this vehicle? - correct answer Check to see if the carburetor is approved as the street- legal replacement part Which of these model year vehicle must receive a low-pressure Evaporative Test(LPFET) - correct answer Model year 1995 and older