Download SQL Interview Questions and Answers: SQL Basics, Data Integrity, and Database Design and more Study notes Design in PDF only on Docsity! SQL INTERVIEW QUESTIONS AND ANSWERS 1 | P a g e SQL INTERVIEW QUESTIONS & ANSWERS SQL INTERVIEW QUESTIONS AND ANSWERS 2 | P a g e MOST FREQUENTLY ASKED SQL INTERVIEW QUESTIONS 1. What is the difference between “Stored Procedure” and “Function”? 1. A procedure can have both input and output parameters, but a function can only have input parameters. 2. Inside a procedure we can use DML (INSERT/UPDATE/DELETE) statements. But inside a function we can't use DML statements. 3. We can't utilize a Stored Procedure in a Select statement. But we can use a function in a Select statement. 4. We can use a Try-Catch Block in a Stored Procedure but inside a function we can't use a Try-Catch block. 5. We can use transaction management in a procedure but we can't in a function. 6. We can't join a Stored Procedure but we can join functions. 7. Stored Procedures cannot be used in the SQL statements anywhere in the WHERE/HAVING/SELECT section. But we can use a function anywhere. 8. A procedure can return 0 or n values (max 1024). But a function can return only 1 value that is mandatory. 9. A procedure can't be called from a function but we can call a function from a procedure. 2.What is difference between “Clustered Index” and “Non Clustered Index”? 1. A Clustered Index physically stores the data of the table in the order of the keys values and the data is resorted every time whenever a new value is inserted or a value is updated in the column on which it is defined, whereas a non-clustered index creates a separate list of key values (or creates a table of pointers) that points towards the location of the data in the data pages. 2. A Clustered Index requires no separate storage than the table storage. It forces the rows to be stored sorted on the index key whereas a non-clustered index requires separate storage than the table storage to store the index information. 3. A table with a Clustered Index is called a Clustered Table. Its rows are stored in a B- Tree structure sorted whereas a table without any clustered indexes is called a non- clustered table. Its rows are stored in a heap structure unsorted. 4. The default index is created as part of the primary key column as a Clustered Index. 5. In a Clustered Index, the leaf node contains the actual data whereas in a non- clustered index, the leaf node contains the pointer to the data rows of the table. 6. A Clustered Index always has an Index Id of 1 whereas non-clustered indexes have Index Ids > 1. 7. A Table can have only 1 Clustered Index whereas prior to SQL Server 2008 only 249 non-clustered indexes can be created. With SQL Server 2008 and above 999 non- clustered indexes can be created. 8. A Primary Key constraint creates a Clustered Index by default whereas A Unique Key constraint creates a non-clustered index by default. SQL INTERVIEW QUESTIONS AND ANSWERS 5 | P a g e 9.What is database normalization? Ans: It is a process of analyzing the given relation schemas based on their functional dependencies and primary keys to achieve the following desirable properties: 1)Minimizing Redundancy 2) Minimizing the Insertion, Deletion, And Update Anomalies Relation schemas that do not meet the properties are decomposed into smaller relation schemas that could meet desirable properties. 10.What is SQL? SQL is Structured Query Language designed for inserting and modifying in a relational database management system. 11.What are the differences between DDL, DML and DCL in SQL? Ans: Following are some details of three. DDL stands for Data Definition Language. SQL queries like CREATE, ALTER, DROP and RENAME come under this. DML stands for Data Manipulation Language. SQL queries like SELECT, INSERT and UPDATE come under this. DCL stands for Data Control Language. SQL queries like GRANT and REVOKE come under this. 12.What is the difference between having and where clause? Ans: HAVING is used to specify a condition for a group or an aggregate function used in select statement. The WHERE clause selects before grouping. The HAVING clause selects rows after grouping. Unlike HAVING clause, the WHERE clause cannot contain aggregate functions. 13.What is Join? Ans: An SQL Join is used to combine data from two or more tables, based on a common field between them. For example, consider the following two tables. Student Table EnrollNo StudentName Address 1000 geek1 geeksquiz1 1001 geek2 geeksquiz2 1002 geek3 geeksquiz3 StudentCourse Table SQL INTERVIEW QUESTIONS AND ANSWERS 6 | P a g e CourseID EnrollNo 1 1000 2 1000 3 1000 1 1002 2 1003 Following is join query that shows names of students enrolled in different courseIDs. SELECT StudentCourse.CourseID, Student.StudentName FROM StudentCourse INNER JOIN Customers ON StudentCourse.EnrollNo = Student.EnrollNo ORDER BY StudentCourse.CourseID; The above query would produce following result. CourseID StudentName 1 geek1 1 geek2 2 geek1 2 geek3 3 geek1 14.What is Identity? Ans: Identity (or AutoNumber) is a column that automatically generates numeric values. A start and increment value can be set, but most DBA leave these at 1. A GUID column also generates numbers; the value of this cannot be controlled. Identity/GUID columns do not need to be indexed. 15.What is a view in SQL? How to create one Ans: A view is a virtual table based on the result-set of an SQL statement. We can create using create view syntax. CREATE VIEW view_name AS SELECT column_name(s) FROM table_name WHERE condition 16..What are the uses of view? 1. Views can represent a subset of the data contained in a table; consequently, a view can limit the degree of exposure of the underlying tables to the outer world: a given user may have permission to query the view, while denied access to the rest of the base table. SQL INTERVIEW QUESTIONS AND ANSWERS 7 | P a g e 2. Views can join and simplify multiple tables into a single virtual table 3. Views can act as aggregated tables, where the database engine aggregates data (sum, average etc.) and presents the calculated results as part of the data 4. Views can hide the complexity of data; for example a view could appear as Sales2000 or Sales2001, transparently partitioning the actual underlying table. 5. Depending on the SQL engine used, views can provide extra security. 17.What is a Trigger? Ans: A Trigger is a code that associated with insert, update or delete operations. The code is executed automatically whenever the associated query is executed on a table. Triggers can be useful to maintain integrity in database. 18.What is a stored procedure? Ans: A stored procedure is like a function that contains a set of operations compiled together. It contains a set of operations that are commonly used in an application to do some common database tasks. 19.What is the difference between Trigger and Stored Procedure? Ans: Unlike Stored Procedures, Triggers cannot be called directly. They can only be associated with queries. 20.What is a transaction? What are ACID properties? Ans: A Database Transaction is a set of database operations that must be treated as whole, means either all operations are executed or none of them. An example can be bank transaction from one account to another account. Either both debit and credit operations must be executed or none of them. ACID (Atomicity, Consistency, Isolation, Durability) is a set of properties that guarantee that database transactions are processed reliably. 21.What are indexes? Ans: A database index is a data structure that improves the speed of data retrieval operations on a database table at the cost of additional writes and the use of more storage space to maintain the extra copy of data. Data can be stored only in one order on disk. To support faster access according to different values, faster search like binary search for different values is desired, For this purpose, indexes are created on tables. These indexes need extra space on disk, but they allow faster search according to different frequently searched values. 22.What are clustered and non-clustered Indexes? Ans: Clustered indexes is the index according to which data is physically stored on disk. Therefore, only one clustered index can be created on a given database table. Non-clustered indexes don’t define physical ordering of data, but logical ordering. Typically, a tree is created whose leaf point to disk records. B-Tree or B+ tree are used for this purpose. SQL INTERVIEW QUESTIONS AND ANSWERS 10 | P a g e 33. What are the type of locks ? 1. Shared Lock When a shared lock is applied on data item, other transactions can only read the item, but can't write into it. 2. Exclusive Lock When a exclusive lock is applied on data item, other transactions can't read or write into the data item. 34.What are the different type of normalization? Frequently asked SQL Interview Questions In database design , we start with one single table, with all possible columns. Lot of redundant data would be present since it’s a single table. The process of removing the redundant data, by splitting up the table in a well defined fashion is called normalization. 1. First Normal Form (1NF) A relation is said to be in first normal form if and only if all underlying domains contain atomic values only. After 1NF, we can still have redundant data 2. Second Normal Form (2NF) A relation is said to be in 2NF if and only if it is in 1NF and every non key attribute is fully dependent on the primary key. After 2NF, we can still have redundant data 3. Third Normal Form (3NF) A relation is said to be in 3NF, if and only if it is in 2NF and every non key attribute is non- transitively dependent on the primary key 35.What is a primary key? Frequently asked SQL Interview Questions A primary key is a column whose values uniquely identify every row in a table. Primary key values can never be reused. If a row is deleted from the table, its primary key may not be assigned to any new rows in the future. To define a field as primary key, following conditions had to be met : 1. No two rows can have the same primary key value. 2. Every row must have a primary key value 3. Primary key field cannot be null 4. Values in primary key columns can never be modified or updated SQL INTERVIEW QUESTIONS AND ANSWERS 11 | P a g e 36.What is a Composite Key ? A Composite primary key is a type of candidate key, which represents a set of columns whose values uniquely identify every row in a table. For example - if "Employee_ID" and "Employee Name" in a table is combined to uniquely identifies a row its called a Composite Key. 37.What is a Composite Primary Key ? A Composite primary key is a set of columns whose values uniquely identify every row in a table. What it means is that, table which contains composite primary key will be indexed based on columns specified in the primary key. This key will be referred in Foreign Key tables. For example - if combined effect of columns, "Employee_ID" and "Employee Name" in a table is required to uniquely identifies a row, its called a Composite Primary Key. In this case, both the columns will be represented as primary key. 38.What is a Foreign Key ? Frequently asked SQL Interview Questions When a "one" table's primary key field is added to a related "many" table in order to create the common field which relates the two tables, it is called a foreign key in the "many" table. For example, salary of an employee is stored in salary table. Relation is established via foreign key column “Employee_ID_Ref” which refers “Employee_ID” field in Employee table . 39. What is a Unique Key ? Unique key is same as primary with difference being existence of null. Unique key field allows one value as NULL value. 40.Define SQL Insert Statement ? SQL INSERT statement is used to add rows to a table. For a full row insert , SQL Query should start with “insert into “ statement followed by table name and values command, followed by the values that need to be inserted into the table. Insert can be used in several ways: 1. To insert a single complete row 2. To insert a single partial row SQL INTERVIEW QUESTIONS AND ANSWERS 12 | P a g e 41. Define SQL Update Statement ? SQL Update is used to update data in a row or set of rows specified in the filter condition. The basic format of an SQL UPDATE statement is ,Update command followed by table to be updated and SET command followed by column names and their new values followed by filter condition that determines which rows should be updated 42. Define SQL Delete Statement ? SQL Delete is used to delete a row or set of rows specified in the filter condition. The basic format of an SQL DELETE statement is, DELETE FROM command followed by table name followed by filter condition that determines which rows should be updated. 43.What are wild cards used in database for Pattern Matching ? SQL Like operator is user for pattern matching. SQL 'Like' command takes more time to process. So before using like operator, consider suggestions given below on when and where to use wild card search. 1) Don't overuse wild cards. If another search operator will do, use it instead. 2) When you do use wild cards, try not to use them at the beginning of the search pattern, unless absolutely necessary. Search patterns that begin with wild cards are the slowest to process. 3) Pay careful attention to the placement of the wild card symbols. If they are misplaced, you might not return the data you intended 44. Define Join and explain different type of joins? In order to avoid data duplication, data is stored in related tables . Join keyword is used to fetch data from related table. Join return rows when there is at least one match in both tables . Type of joins are Right Join Return all rows from the right table, even if there are no matches in the left table . Outer Join Left Join Return all rows from the left table, even if there are no matches in the right table . Full Join Return rows when there is a match in one of the tables . SQL INTERVIEW QUESTIONS AND ANSWERS 15 | P a g e 58.How do you implement one-to-one, one-to-many and many-to-many relationships while designing tables? One-to-One relationship can be implemented as a single table and rarely as two tables with primary and foreign key relationships. One-to-Many relationships are implemented by splitting the data into two tables with primary key and foreign key relationships. Many-to-Many relationships are implemented using a junction table with the keys from both the tables forming the composite primary key of the junction table. 59.What is bit datatype and what's the information that can be stored inside a bit column? Bit datatype is used to store boolean information like 1 or 0 (true or false). Until SQL Server 6.5 bit datatype could hold either a 1 or 0 and there was no support for NULL. But from SQL Server 7.0 onwards, bit datatype can represent a third state, which is NULL. 60.Define candidate key, alternate key, composite key A candidate key is one that can identify each row of a table uniquely. Generally a candidate key becomes the primary key of the table. If the table has more than one candidate key, one of them will become the primary key, and the rest are called alternate keys. A key formed by combining at least two or more columns is called composite key. 61. What are defaults? Is there a column to which a default can't be bound? A default is a value that will be used by a column, if no value is supplied to that column while inserting data. IDENTITY columns and timestamp columns can't have defaults bound to them. See CREATE DEFUALT in books online. 62. What is a transaction and what are ACID properties? A transaction is a logical unit of work in which, all the steps must be performed or none. ACID stands for Atomicity, Consistency, Isolation, Durability. These are the properties of a transaction. For more information and explanation of these properties, see SQL Server books online or any RDBMS fundamentals text book. 63.Explain different isolation levels An isolation level determines the degree of isolation of data between concurrent transactions. The default SQL Server isolation level is Read Committed. Here are the other isolation levels (in the ascending order of isolation): Read Uncommitted, Read Committed, Repeatable Read, Serializable. See SQL Server books online for an explanation of the isolation levels. Be sure to read about SET TRANSACTION ISOLATION LEVEL, which lets you customize the isolation level at the connection level. 64.CREATE INDEX myIndex ON myTable(myColumn) What type of Index will get created after executing the above statement? Non-clustered index. Important thing to note: By default a clustered index gets created on the primary key, unless specified otherwise. SQL INTERVIEW QUESTIONS AND ANSWERS 16 | P a g e 65.What's the maximum size of a row? 8060 bytes. Don't be surprised with questions like 'what is the maximum number of columns per table'. Check out SQL Server books online for the page titled: "Maximum Capacity Specifications". 66. Explain Active/Active and Active/Passive cluster configurations Hopefully you have experience setting up cluster servers. But if you don't, at least be familiar with the way clustering works and the two clustering configurations Active/Active and Active/Passive. SQL Server books online has enough information on this topic and there is a good white paper available on Microsoft site. 67. Explain the architecture of SQL Server This is a very important question and you better be able to answer it if consider yourself a DBA. SQL Server books online is the best place to read about SQL Server architecture. Read up the chapter dedicated to SQL Server Architecture. 68. What is lock escalation? Lock escalation is the process of converting a lot of low level locks (like row locks, page locks) into higher level locks (like table locks). Every lock is a memory structure too many locks would mean, more memory being occupied by locks. To prevent this from happening, SQL Server escalates the many fine-grain locks to fewer coarse-grain locks. Lock escalation threshold was definable in SQL Server 6.5, but from SQL Server 7.0 onwards it's dynamically managed by SQL Server. 69.What is the difference between DELETE TABLE and TRUNCATE TABLE commands? DELETE TABLE is a logged operation, so the deletion of each row gets logged in the transaction log, which makes it slow. TRUNCATE TABLE also deletes all the rows in a table, but it won't log the deletion of each row, instead it logs the de-allocation of the data pages of the table, which makes it faster. Of course, TRUNCATE TABLE can be rolled back. 70. Explain the storage models of OLAP Check out MOLAP, ROLAP and HOLAP in SQL Server books online for more information. 71. What are the new features introduced in SQL Server 2000 (or the latest release of SQL Server at the time of your interview)? What changed between the previous version of SQL Server and the current version? This question is generally asked to see how current is your knowledge. Generally there is a section in the beginning of the books online titled "What's New", which has all such information. Of course, reading just that is not enough, you should have tried those things to better answer the questions. Also check out the section titled "Backward Compatibility" in books online which talks about the changes that have taken place in the new version. SQL INTERVIEW QUESTIONS AND ANSWERS 17 | P a g e 72. What are constraints? Explain different types of constraints Constraints enable the RDBMS enforce the integrity of the database automatically, without needing you to create triggers, rule or defaults. Types of constraints: NOT NULL, CHECK, UNIQUE, PRIMARY KEY, FOREIGN KEY For an explanation of these constraints see books online for the pages titled: "Constraints" and "CREATE TABLE", "ALTER TABLE" 73. What is an index? What are the types of indexes? How many clustered indexes can be created on a table? I create a separate index on each column of a table. what are the advantages and disadvantages of this approach? Indexes in SQL Server are similar to the indexes in books. They help SQL Server retrieve the data quicker. Indexes are of two types. Clustered indexes and non-clustered indexes. When you createe a clustered index on a table, all the rows in the table are stored in the order of the clustered index key. So, there can be only one clustered index per table. Non-clustered indexes have their own storage separate from the table data storage. Non-clustered indexes are stored as B-tree structures (so do clustered indexes), with the leaf level nodes having the index key and it's row locater. The row located could be the RID or the Clustered index key, depending up on the absence or presence of clustered index on the table. If you create an index on each column of a table, it improves the query performance, as the query optimizer can choose from all the existing indexes to come up with an efficient execution plan. At the same time, data modification operations (such as INSERT, UPDATE, DELETE) will become slow, as every time data changes in the table, all the indexes need to be updated. Another disadvantage is that, indexes need disk space, the more indexes you have, more disk space is used. 74. What is RAID and what are different types of RAID configurations? RAID stands for Redundant Array of Inexpensive Disks, used to provide fault tolerance to database servers. There are six RAID levels 0 through 5 offering different levels of performance, fault tolerance. MSDN has some information about RAID levels and for detailed information, check out the RAID advisory board's homepage. 75. What are the steps you will take to improve performance of a poor performing query? This is a very open ended question and there could be a lot of reasons behind the poor performance of a query. But some general issues that you could talk about would be: No indexes, table scans, missing or out of date statistics, blocking, excess recompilations of stored procedures, procedures and triggers without SET NOCOUNT ON, poorly written query with unnecessarily complicated joins, too much normalization, excess usage of cursors and temporary tables. Some of the tools/ways that help you troubleshooting performance problems are: SET SHOWPLAN_ALL ON, SET SHOWPLAN_TEXT ON, SET STATISTICS IO ON, SQL Server Profiler, Windows NT /2000 Performance monitor, Graphical execution plan in Query Analyzer. SQL INTERVIEW QUESTIONS AND ANSWERS 20 | P a g e 86. How to determine the service pack currently installed on SQL Server? The global variable @@Version stores the build number of the sqlservr.exe, which is used to determine the service pack installed. To know more about this process visit 87.What are cursors? Explain different types of cursors. What are the disadvantages of cursors? How can you avoid cursors? Cursors allow row-by-row processing of the result sets. Types of cursors: Static, Dynamic, Forward-only, Keyset-driven. See books online for more information. Disadvantages of cursors: Each time you fetch a row from the cursor, it results in a network roundtrip, where as a normal SELECT query makes only one rowundtrip, however large the resultset is. Cursors are also costly because they require more resources and temporary storage (results in more IO operations). Furthere, there are restrictions on the SELECT statements that can be used with some types of cursors. Most of the times, set based operations can be used instead of cursors. Here is an example: If you have to give a flat hike to your employees using the following criteria: Salary between 30000 and 40000 -- 5000 hike Salary between 40000 and 55000 -- 7000 hike Salary between 55000 and 65000 -- 9000 hike In this situation many developers tend to use a cursor, determine each employee's salary and update his salary according to the above formula. But the same can be achieved by multiple update statements or can be combined in a single UPDATE statement as shown below: UPDATE tbl_emp SET salary = CASE WHEN salary BETWEEN 30000 AND 40000 THEN salary + 5000 WHEN salary BETWEEN 40000 AND 55000 THEN salary + 7000 WHEN salary BETWEEN 55000 AND 65000 THEN salary + 10000 END Another situation in which developers tend to use cursors: You need to call a stored procedure when a column in a particular row meets certain condition. You don't have to use cursors for this. This can be achieved using WHILE loop, as long as there is a unique key to identify each row. 88. Write down the general syntax for a SELECT statements covering all the options Here's the basic syntax: (Also checkout SELECT in books online for advanced syntax). SELECT select_list [INTO new_table_] FROM table_source [WHERE search_condition] [GROUP BY group_by_expression] [HAVING search_condition] [ORDER BY order_expression [ASC | DESC] ] SQL INTERVIEW QUESTIONS AND ANSWERS 21 | P a g e 89. What is a join and explain different types of joins Joins are used in queries to explain how different tables are related. Joins also let you select data from a table depending upon data from another table. Types of joins: INNER JOINs, OUTER JOINs, CROSS JOINs,OUTER JOINs are further classified as LEFT OUTER JOINS, RIGHT OUTER JOINS and FULL OUTER JOINS. 90. Can you have a nested transaction? Yes, very much. Check out BEGIN TRAN, COMMIT, ROLLBACK, SAVE TRAN and @@TRANCOUNT 91. What is an extended stored procedure? Can you instantiate a COM object by using T-SQL? An extended stored procedure is a function within a DLL (written in a programming language like C, C++ using Open Data Services (ODS) API) that can be called from T-SQL,just the way we call normal stored procedures using the EXEC statement. See books online to learn how to create extended stored procedures and how to add them to SQL Server. Yes, you can instantiate a COM (written in languages like VB, VC++) object from T-SQL by using sp_OA Create stored procedure. 92. What is the system function to get the current user's user id? USER_ID().Also check out other system functions like USER_NAME(), SYSTEM_USER, SESSION_USER, CURRENT_USER, USER, SUSER_SID(), HOST_NAME(). 93. What are triggers? How many triggers you can have on a table? How to invoke a trigger on demand? Triggers are special kind of stored procedures that get executed automatically when an INSERT, UPDATE or DELETE operation takes place on a table. In SQL Server 6.5 you could define only 3 triggers per table, one for INSERT, one for UPDATE and one for DELETE. From SQL Server 7.0 onwards, this restriction is gone, and you could create multiple triggers per each action. But in 7.0 there's no way to control the order in which the triggers fire. In SQL Server 2000 you could specify which trigger fires first or fires last using sp_settriggerorder Triggers can't be invoked on demand. They get triggered only when an associated action (INSERT, UPDATE, DELETE) happens on the table on which they are defined. Triggers are generally used to implement business rules, auditing. Triggers can also be used to extend the referential integrity checks, but wherever possible, use constraints for this purpose, instead of triggers, as constraints are much faster. Till SQL Server 7.0, triggers fire only after the data modification operation happens. So in a way, they are called post triggers. But in SQL Server 2000 you could create pre triggers also. Search SQL Server 2000 books online for INSTEAD OF triggers. SQL INTERVIEW QUESTIONS AND ANSWERS 22 | P a g e 94. There is a trigger defined for INSERT operations on a table, in an OLTP system. The trigger is written to instantiate a COM object and pass the newly insterted rows to it for some custom processing. What do you think of this implementation? Can this be implemented better? Instantiating COM objects is a time consuming process and since you are doing it from within a trigger, it slows down the data insertion process. Same is the case with sending emails from triggers. This scenario can be better implemented by logging all the necessary data into a separate table, and have a job which periodically checks this table and does the needful. 95. What is a self join? Explain it with an example Self join is just like any other join, except that two instances of the same table will be joined in the query. Here is an example: Employees table which contains rows for normal employees as well as managers. So, to find out the managers of all the employees, you need a self join. CREATE TABLE emp ( empid int, mgrid int, empname char(10) ) INSERT emp SELECT 1,2,'Vyas' INSERT emp SELECT 2,3,'Mohan' INSERT emp SELECT 3,NULL,'Shobha' INSERT emp SELECT 4,2,'Shridhar' INSERT emp SELECT 5,2,'Sourabh' SELECT t1.empname [Employee], t2.empname [Manager] FROM emp t1, emp t2 WHERE t1.mgrid = t2.empid Here's an advanced query using a LEFT OUTER JOIN that even returns the employees without managers (super bosses) SELECT t1.empname [Employee], COALESCE(t2.empname, 'No manager') [Manager] FROM emp t1 LEFT OUTER JOIN emp t2 ON t1.mgrid = t2.empid SQL INTERVIEW QUESTIONS AND ANSWERS 25 | P a g e 111. What is RDBMS? Relational Data Base Management Systems (RDBMS) are database management systems that maintain data records and indices in tables. Relationships may be created and maintained across and among the data and tables. In a relational database, relationships between data items are expressed by means of tables. Interdependencies among these tables are expressed by data values rather than by pointers. This allows a high degree of data independence. An RDBMS has the capability to recombine the data items from different files, providing powerful tools for data usage. 112. What are the properties of the Relational tables? Relational tables have six properties: 1. Values are atomic. 2. Column values are of the same kind. 3. Each row is unique. 4. The sequence of columns is insignificant. 5. The sequence of rows is insignificant. 6. Each column must have a unique name. 113. What is Normalization? Database normalization is a data design and organization process applied to data structures based on rules that help building relational databases. In relational database design, the process of organizing data to minimize redundancy is called normalization. Normalization usually involves dividing a database into two or more tables and defining relationships between the tables. The objective is to isolate data so that additions, deletions, and modifications of a field can be made in just one table and then propagated through the rest of the database via the defined relationships. 114. What is De-normalization? De-normalization is the process of attempting to optimize the performance of a database by adding redundant data. It is sometimes necessary because current DBMSs implement the relational model poorly. A true relational DBMS would allow for a fully normalized database at the logical level, while providing physical storage of data that is tuned for high performance. De-normalization is a technique to move from higher to lower normal forms of database modeling in order to speed up database access. 115. What are different normalization forms? 1. 1NF: Eliminate Repeating Groups Make a separate table for each set of related attributes, and give each table a primary key. Each field contains at most one value from its attribute domain. SQL INTERVIEW QUESTIONS AND ANSWERS 26 | P a g e 2. 2NF: Eliminate Redundant Data If an attribute depends on only part of a multi- valued key, remove it to a separate table. 3. 3NF: Eliminate Columns Not Dependent On Key If attributes do not contribute to a description of the key, remove them to a separate table. All attributes must be directly dependent on the primary key. 4. BCNF: Boyce-Codd Normal Form If there are non-trivial dependencies between candidate key attributes, separate them out into distinct tables. 5. 4NF: Isolate Independent Multiple Relationships No table may contain two or more 1:n or n:m relationships that are not directly related. 6. 5NF: Isolate Semantically Related Multiple Relationships There may be practical constrains on information that justify separating logically related many-to-many relationships. 7. ONF: Optimal Normal Form A model limited to only simple (elemental) facts, as expressed in Object Role Model notation. 8. DKNF: Domain-Key Normal Form A model free from all modification anomalies is said to be in DKNF. Remember, these normalization guidelines are cumulative. For a database to be in 3NF, it must first fulfill all the criteria of a 2NF and 1NF database. 116. What is Stored Procedure? A stored procedure is a named group of SQL statements that have been previously created and stored in the server database. Stored procedures accept input parameters so that a single procedure can be used over the network by several clients using different input data. And when the procedure is modified, all clients automatically get the new version. Stored procedures reduce network traffic and improve performance. Stored procedures can be used to help ensure the integrity of the database. e.g. sp_helpdb, sp_renamedb, sp_depends etc. 117. What is Trigger? A trigger is a SQL procedure that initiates an action when an event (INSERT, DELETE or UPDATE) occurs. Triggers are stored in and managed by the DBMS. Triggers are used to maintain the referential integrity of data by changing the data in a systematic fashion. A trigger cannot be called or executed; DBMS automatically fires the trigger as a result of a data modification to the associated table. Triggers can be viewed as similar to stored procedures in that both consist of procedural logic that is stored at the database level. Stored procedures, however, are not event-drive and are not attached to a specific table as triggers are. Stored procedures are explicitly executed by invoking a CALL to the procedure while triggers are implicitly executed. In addition, triggers can also execute stored procedures. SQL INTERVIEW QUESTIONS AND ANSWERS 27 | P a g e 118. What is Nested Trigger? A trigger can also contain INSERT, UPDATE and DELETE logic within itself, so when the trigger is fired because of data modification it can also cause another data modification, thereby firing another trigger. A trigger that contains data modification logic within itself is called a nested trigger. 119. What is View? A simple view can be thought of as a subset of a table. It can be used for retrieving data, as well as updating or deleting rows. Rows updated or deleted in the view are updated or deleted in the table the view was created with. It should also be noted that as data in the original table changes, so does data in the view, as views are the way to look at part of the original table. The results of using a view are not permanently stored in the database. The data accessed through a view is actually constructed using standard T-SQL select command and can come from one to many different base tables or even other views. 120. What is Index? An index is a physical structure containing pointers to the data. Indices are created in an existing table to locate rows more quickly and efficiently. It is possible to create an index on one or more columns of a table, and each index is given a name. The users cannot see the indexes; they are just used to speed up queries. Effective indexes are one of the best ways to improve performance in a database application. A table scan happens when there is no index available to help a query. In a table scan SQL Server examines every row in the table to satisfy the query results. Table scans are sometimes unavoidable, but on large tables, scans have a terrific impact on performance. 121. What is a Linked Server? Linked Servers is a concept in SQL Server by which we can add other SQL Server to a Group and query both the SQL Server dbs using T-SQL Statements. With a linked server, you can create very clean, easy to follow, SQL statements that allow remote data to be retrieved, joined and combined with local data. Stored Procedure sp_addlinkedserver, sp_addlinkedserverlogin will be used add new Linked Server. 122. What is Cursor? Cursor is a database object used by applications to manipulate data in a set on a row-by- row basis, instead of the typical SQL commands that operate on all the rows in the set at one time. In order to work with a cursor we need to perform some steps in the following order: 1. Declare cursor 2. Open cursor 3. Fetch row from the cursor SQL INTERVIEW QUESTIONS AND ANSWERS 30 | P a g e result where the view is limited to a single SELECT statement. Also, the ability to pass parameters into a TSQL select command or a group of them gives us the capability to in essence create a parameterized, non-updateable view of the data in the underlying tables. Within the create function command you must define the table structure that is being returned. After creating this type of user-defined function, It can be used in the FROM clause of a T-SQL command unlike the behavior found when using a stored procedure which can also return record sets. 129. What is Identity? Identity (or AutoNumber) is a column that automatically generates numeric values. A start and increment value can be set, but most DBA leave these at 1. A GUID column also generates numbers; the value of this cannot be controlled. Identity/GUID columns do not need to be indexed. 130. Which TCP/IP port does SQL Server run on? How can it be changed? SQL Server runs on port 1433. It can be changed from the Network Utility TCP/IP properties. 131. What are the difference between clustered and a non-clustered index? 1. A clustered index is a special type of index that reorders the way records in the table are physically stored. Therefore table can have only one clustered index. The leaf nodes of a clustered index contain the data pages. 2. A non clustered index is a special type of index in which the logical order of the index does not match the physical stored order of the rows on disk. The leaf node of a non clustered index does not consist of the data pages. Instead, the leaf nodes contain index rows. 132. What are the different index configurations a table can have? A table can have one of the following index configurations: 1. No indexes 2. A clustered index 3. A clustered index and many nonclustered indexes 4. A non clustered index 5. Many non clustered indexes 134. What are different types of Collation Sensitivity? 1. Case sensitivity - A and a, B and b, etc. 2. Accent sensitivity 3. Kana Sensitivity - When Japanese kana characters Hiragana and Katakana are treated differently, it is called Kana sensitive. SQL INTERVIEW QUESTIONS AND ANSWERS 31 | P a g e 4. Width sensitivity - A single-byte character (half-width) and the same character represented as a double-byte character (full-width) are treated differently than it is width sensitive. 135. What is OLTP (Online Transaction Processing)? In OLTP - online transaction processing systems relational database design use the discipline of data modeling and generally follow the Codd rules of data normalization in order to ensure absolute data integrity. Using these rules complex information is broken down into its most simple structures (a table) where all of the individual atomic level elements relate to each other and satisfy the normalization rules. 136. What's the difference between a primary key and a unique key? Both primary key and unique key enforces uniqueness of the column on which they are defined. But by default primary key creates a clustered index on the column, where are unique creates a non clustered index by default. Another major difference is that, primary key doesn't allow NULLs, but unique key allows one NULL only. 137. What is difference between DELETE and TRUNCATE commands? Delete command removes the rows from a table based on the condition that we provide with a WHERE clause. Truncate will actually remove all the rows from a table and there will be no data in the table after we run the truncate command. 1. TRUNCATE: 1. TRUNCATE is faster and uses fewer system and transaction log resources than DELETE. 2. TRUNCATE removes the data by deallocating the data pages used to store the table's data, and only the page deallocations are recorded in the transaction log. 3. TRUNCATE removes all rows from a table, but the table structure, its columns, constraints, indexes and so on, remains. The counter used by an identity for new rows is reset to the seed for the column. 4. You cannot use TRUNCATE TABLE on a table referenced by a FOREIGN KEY constraint. Because TRUNCATE TABLE is not logged, it cannot activate a trigger. 5. TRUNCATE cannot be rolled back. 6. TRUNCATE is DDL Command. 7. TRUNCATE Resets identity of the table 2. DELETE: 1. DELETE removes rows one at a time and records an entry in the transaction log for each deleted row. 2. If you want to retain the identity counter, use DELETE instead. If you want to remove table definition and its data, use the DROP TABLE statement. 3. DELETE Can be used with or without a WHERE clause SQL INTERVIEW QUESTIONS AND ANSWERS 32 | P a g e 4. DELETE Activates Triggers. 5. DELETE can be rolled back. 6. DELETE is DML Command. 7. DELETE does not reset identity of the table. Note: DELETE and TRUNCATE both can be rolled back when surrounded by TRANSACTION if the current session is not closed. If TRUNCATE is written in Query Editor surrounded by TRANSACTION and if session is closed, it can not be rolled back but DELETE can be rolled back. 138. When is the use of UPDATE_STATISTICS command? This command is basically used when a large processing of data has occurred. If a large amount of deletions any modification or Bulk Copy into the tables has occurred, it has to update the indexes to take these changes into account. UPDATE_STATISTICS updates the indexes on these tables accordingly. 139. What is the difference between a HAVING CLAUSE and a WHERE CLAUSE? They specify a search condition for a group or an aggregate. But the difference is that HAVING can be used only with the SELECT statement. HAVING is typically used in a GROUP BY clause. When GROUP BY is not used, HAVING behaves like a WHERE clause. Having Clause is basically used only with the GROUP BY function in a query whereas WHERE Clause is applied to each row before they are part of the GROUP BY function in a query. 140. What are the properties and different Types of Sub-Queries? 1. Properties of Sub-Query 1. A sub-query must be enclosed in the parenthesis. 2. A sub-query must be put in the right hand of the comparison operator, and 3. A sub-query cannot contain an ORDER-BY clause. 4. A query can contain more than one sub-query. 2. Types of Sub-Query 1. Single-row sub-query, where the sub-query returns only one row. 2. Multiple-row sub-query, where the sub-query returns multiple rows,. and 3. Multiple column sub-query, where the sub-query returns multiple columns 141. What is SQL Profiler? SQL Profiler is a graphical tool that allows system administrators to monitor events in an instance of Microsoft SQL Server. You can capture and save data about each event to a file or SQL Server table to analyze later. For example, you can monitor a production environment to see which stored procedures are hampering performances by executing too slowly. SQL INTERVIEW QUESTIONS AND ANSWERS 35 | P a g e 151. What is PRIMARY KEY? A PRIMARY KEY constraint is a unique identifier for a row within a database table. Every table should have a primary key constraint to uniquely identify each row and only one primary key constraint can be created for each table. The primary key constraints are used to enforce entity integrity. 152. What is UNIQUE KEY constraint? A UNIQUE constraint enforces the uniqueness of the values in a set of columns, so no duplicate values are entered. The unique key constraints are used to enforce entity integrity as the primary key constraints. 153. What is FOREIGN KEY? A FOREIGN KEY constraint prevents any actions that would destroy links between tables with the corresponding data values. A foreign key in one table points to a primary key in another table. Foreign keys prevent actions that would leave rows with foreign key values when there are no primary keys with that value. The foreign key constraints are used to enforce referential integrity. 154. What is CHECK Constraint? A CHECK constraint is used to limit the values that can be placed in a column. The check constraints are used to enforce domain integrity. 155. What is NOT NULL Constraint? A NOT NULL constraint enforces that the column will not accept null values. The not null constraints are used to enforce domain integrity, as the check constraints. 156. How to get @@ERROR and @@ROWCOUNT at the same time? If @@Rowcount is checked after Error checking statement then it will have 0 as the value of @@Recordcount as it would have been reset. And if @@Recordcount is checked before the error-checking statement then @@Error would get reset. To get @@error and @@rowcount at the same time do both in same statement and store them in local variable. SELECT @RC = @@ROWCOUNT, @ER = @@ERROR 157. What is a Scheduled Jobs or What is a Scheduled Tasks? Scheduled tasks let user automate processes that run on regular or predictable cycles. User can schedule administrative tasks, such as cube processing, to run during times of slow business activity. User can also determine the order in which tasks run by creating job steps within a SQL Server Agent job. E.g. back up database, Update Stats of Tables. Job steps SQL INTERVIEW QUESTIONS AND ANSWERS 36 | P a g e give user control over flow of execution. If one job fails, user can configure SQL Server Agent to continue to run the remaining tasks or to stop execution. 158. What are the advantages of using Stored Procedures? 1. Stored procedure can reduced network traffic and latency, boosting application performance. 2. Stored procedure execution plans can be reused, staying cached in SQL Server's memory, reducing server overhead. 3. Stored procedures help promote code reuse. 4. Stored procedures can encapsulate logic. You can change stored procedure code without affecting clients. 5. Stored procedures provide better security to your data. 159. What is a table called, if it has neither Cluster nor Non-cluster Index? What is it used for? Unindexed table or Heap. Microsoft Press Books and Book on Line (BOL) refers it as Heap. A heap is a table that does not have a clustered index and, therefore, the pages are not linked by pointers. The IAM pages are the only structures that link the pages in a table together. Unindexed tables are good for fast storing of data. Many times it is better to drop all indexes from table and then do bulk of inserts and to restore those indexes after that. 160. Can SQL Servers linked to other servers like Oracle? SQL Server can be linked to any server provided it has OLE-DB provider from Microsoft to allow a link. E.g. Oracle has an OLE-DB provider for oracle that Microsoft provides to add it as linked server to SQL Server group. 161. How to implement one-to-one, one-to-many and many-to-many relationships while designing tables? One-to-One relationship can be implemented as a single table and rarely as two tables with primary and foreign key relationships. One-to-Many relationships are implemented by splitting the data into two tables with primary key and foreign key relationships. Many- to-Many relationships are implemented using a junction table with the keys from both the tables forming the composite primary key of the junction table. 162. What are the basic functions for master, msdb, model, tempdb and resource databases? 1. The master database holds information for all databases located on the SQL Server instance and is theglue that holds the engine together. Because SQL Server cannot start without a functioning masterdatabase, you must administer this database with care. SQL INTERVIEW QUESTIONS AND ANSWERS 37 | P a g e 2. The msdb database stores information regarding database backups, SQL Agent information, DTS packages, SQL Server jobs, and some replication information such as for log shipping. 3. The tempdb holds temporary objects such as global and local temporary tables and stored procedures. 4. The model is essentially a template database used in the creation of any new user database created in the instance. 5. The resoure Database is a read-only database that contains all the system objects that are included with SQL Server. SQL Server system objects, such as sys.objects, are physically persisted in the Resource database, but they logically appear in the sys schema of every database. The Resource database does not contain user data or user metadata. 163. What is Service Broker? Service Broker is a message-queuing technology in SQL Server that allows developers to integrate SQL Server fully into distributed applications. Service Broker is feature which provides facility to SQL Server to send an asynchronous, transactional message. it allows a database to send a message to another database without waiting for the response, so the application will continue to function if the remote database is temporarily unavailable. 164. Where SQL server user names and passwords are stored in SQL server? They get stored in System Catalog Views sys.server_principals and sys.sql_logins. 165. What is Policy Management? Policy Management in SQL SERVER 2008 allows you to define and enforce policies for configuring and managing SQL Server across the enterprise. Policy-Based Management is configured in SQL Server Management Studio (SSMS). Navigate to the Object Explorer and expand the Management node and the Policy Management node; you will see the Policies, Conditions, and Facets nodes. 166. What is Replication and Database Mirroring? Database mirroring can be used with replication to provide availability for the publication database. Database mirroring involves two copies of a single database that typically reside on different computers. At any given time, only one copy of the database is currently available to clients which are known as the principal database. Updates made by clients to the principal database are applied on the other copy of the database, known as the mirror database. Mirroring involves applying the transaction log from every insertion, update, or deletion made on the principal database onto the mirror database. SQL INTERVIEW QUESTIONS AND ANSWERS 40 | P a g e 175. What is Aggregate Functions? Aggregate functions perform a calculation on a set of values and return a single value. Aggregate functions ignore NULL values except COUNT function. HAVING clause is used, along with GROUP BY, for filtering query using aggregate values. Following functions are aggregate functions. AVG, MIN CHECKSUM_AGG, SUM, COUNT, STDEV, COUNT_BIG, STDEVP, GROUPING, VAR, MAX. VARP 176. What do you mean by Table Sample? TABLESAMPLE allows you to extract a sampling of rows from a table in the FROM clause. The rows retrieved are random and they are not in any order. This sampling can be based on a percentage of number of rows. You can use TABLESAMPLE when only a sampling of rows is necessary for the application instead of a full result set. 177. What is the difference between UNION and UNION ALL? 1. UNION The UNION command is used to select related information from two tables, much like the JOIN command. However, when using the UNION command all selected columns need to be of the same data type. With UNION, only distinct values are selected. 2. UNION ALL The UNION ALL command is equal to the UNION command, except that UNION ALL selects all values. The difference between Union and Union all is that Union all will not eliminate duplicate rows, instead it just pulls all rows from all tables fitting your query specifics and combines them into a table. 178. What is B-Tree? The database server uses a B-tree structure to organize index information. B-Tree generally has following types of index pages or nodes: 1. root node: A root node contains node pointers to branch nodes which can be only one. 2. branch node: A branch node contains pointers to leaf nodes or other branch nodes which can be two or more. 3. leaf nodes: A leaf node contains index items and orizantal pointers to other leaf nodes which can be many. SQL INTERVIEW QUESTIONS AND ANSWERS 41 | P a g e 179. What is a foreign key, and what is it used for? A foreign key is used to establish relationships among relations in the relational model. Technically, a foreign key is a column (or columns) appearing in one relation that is (are) the primary key of another table. Although there may be exceptions, the values in the foreign key columns usually must correspond to values existing in the set of primary key values. This correspondence requirement is created in a database using a referential integrity constraint on the foreign key. 180. What does it mean when we say that a relation is in Boyce-Codd Normal Form (BCNF)? A relation is in BCNF when every determinant in the relation is a candidate key. This means that any possible primary key can determine all other attributes in the relation. Attributes may not be determined by non-candidate key attributes or part of a composite candidate key. Thus it is said "I swear to construct my tables so that all nonkey columns are dependent on the key, the whole key and nothing but the key, so help me Codd!" 181. You have been given a set of tables with data and asked to create a new database to store them. When you examine the data values in the tables, what are you looking for? (1) Multivalued dependencies, (2) Functional dependencies, (3) Candidate keys, (4) Primary keys and (5) Foreign keys. 182. Explain the difference between attributes and identifiers. Entities have attributes. Attributes are properties that describe the entity's characteristics. Entity instances have identifiers. Identifiers are attributes that name, or identify, entity instances. 183. Name and describe three types of binary relationships. 1:1 - a single entity instance of one type is related to a single-entity instance of another type. 1:N - a single entity instance of one type is related to many-entity instances of another type. M:N - many-entity instances of one type relate to many-entity instances of another type. 184. What are stored procedures, and how do they differ from triggers? A stored procedure is a program that is stored within the database and is compiled when used. They can receive input parameters and they can return results. Unlike triggers, their scope is database-wide; they can be used by any process that has permission to use the database stored procedure. SQL INTERVIEW QUESTIONS AND ANSWERS 42 | P a g e 185. What are the advantages of using stored procedures? The advantages of stored procedures are (1) greater security, (2) decreased network traffic, (3) the fact that SQL can be optimized and (4) code sharing which leads to less work, standardized processing, and specialization among developers. 186. What is the relationship of ODBC, OLE DB, and ADO? Developed first, the ODBC standard is for relational databases; while the OLE DB standard provides functionality for both relational and other databases. Finally, ADO was developed to provide easier access to OLE DB data for the non-object-oriented programmer. 187. Explain the differences between structured data and unstructured data. Structured data are facts concerning objects and events. The most important structured data are numeric, character, and dates. Structured data are stored in tabular form. Unstructured data are multimedia data such as documents, photographs, maps, images, sound, and video clips. Unstructured data are most commonly found on Web servers and Web-enabled databases. 188.What are dimension tables and definition of Fact tables? These two questions are most commonly asked database interview questions. Fact tables are mainly central tables that are an integral part of data warehousing and dimension tables are used for describing the attributes of the fact tables. Both of these tables are important and play an important role in maintaining the database management system. 189.What is Data Warehouse? A data warehouse is a subject-oriented, integrated, time-variant and non-volatile collection of data in support of management's decision making process. Subject-Oriented: A data warehouse can be used to analyze a particular subject area. For example, "sales" can be a particular subject. Integrated: A data warehouse integrates data from multiple data sources. For example, source A and source B may have different ways of identifying a product, but in a data warehouse, there will be only a single way of identifying a product. Time-Variant: Historical data is kept in a data warehouse. For example, one can retrieve data from 3 months, 6 months, 12 months, or even older data from a data warehouse. This contrasts with a transactions system, where often only the most recent data is kept. For example, a transaction system may hold the most recent address of a customer, where a data warehouse can hold all addresses associated with a customer. SQL INTERVIEW QUESTIONS AND ANSWERS 45 | P a g e altertnate solution: select empno,ename,b.deptno,dname from emp a, dept b where a.deptno(+) = b.deptno and empno is null; 18.How to get 3 Max salaries ? select distinct sal from emp a where 3 >= (select count(distinct sal) from emp b where a.sal <= b.sal) order by a.sal desc; 19.How to get 3 Min salaries ? select distinct sal from emp a where 3 >= (select count(distinct sal) from emp b where a.sal >= b.sal); 20.How to get nth max salaries ? select distinct hiredate from emp a where &n = (select count(distinct sal) from emp b where a.sal >= b.sal); 21.Select DISTINCT RECORDS from emp table. select * from emp a where rowid = (select max(rowid) from emp b where a.empno=b.empno); 22.How to delete duplicate rows in a table? delete from emp a where rowid != (select max(rowid) from emp b where a.empno=b.empno); 23.Count of number of employees in department wise. select count(EMPNO), b.deptno, dname from emp a, dept b where a.deptno(+)=b.deptno group by b.deptno,dname; 24. Suppose there is annual salary information provided by emp table. How to fetch monthly salary of each and every employee? select ename,sal/12 as monthlysal from emp; 25.Select all record from emp table where deptno =10 or 40. select * from emp where deptno=30 or deptno=10; 26.Select all record from emp table where deptno=30 and sal>1500. select * from emp where deptno=30 and sal>1500; 27.Select all record from emp where job not in SALESMAN or CLERK. select * from emp where job not in ('SALESMAN','CLERK'); 28.Select all record from emp where ename in 'BLAKE','SCOTT','KING'and'FORD'. SQL INTERVIEW QUESTIONS AND ANSWERS 46 | P a g e select * from emp where ename in('JONES','BLAKE','SCOTT','KING','FORD'); 29.Select all records where ename starts with ‘S’ and its lenth is 6 char. select * from emp where ename like'S____'; 30.Select all records where ename may be any no of character but it should end with ‘R’. select * from emp where ename like'%R'; 31.Count MGR and their salary in emp table. select count(MGR),count(sal) from emp; 32.In emp table add comm+sal as total sal . select ename,(sal+nvl(comm,0)) as totalsal from emp; 33.Select any salary <3000 from emp table. select * from emp where sal> any(select sal from emp where sal<3000); 34.Select all salary <3000 from emp table. select * from emp where sal> all(select sal from emp where sal<3000); 35.Select all the employee group by deptno and sal in descending order. select ename,deptno,sal from emp order by deptno,sal desc; 36.How can I create an empty table emp1 with same structure as emp? Create table emp1 as select * from emp where 1=2; 37.How to retrive record where sal between 1000 to 2000? Select * from emp where sal>=1000 And sal<2000 38.Select all records where dept no of both emp and dept table matches. select * from emp where exists(select * from dept where emp.deptno=dept.deptno) 39.If there are two tables emp1 and emp2, and both have common record. How can I fetch all the recods but common records only once? (Select * from emp) Union (Select * from emp1) SQL INTERVIEW QUESTIONS AND ANSWERS 47 | P a g e 40.How to fetch only common records from two tables emp and emp1? (Select * from emp) Intersect (Select * from emp1) 41. How can I retrive all records of emp1 those should not present in emp2? (Select * from emp) Minus (Select * from emp1) 42.Count the totalsa deptno wise where more than 2 employees exist. SELECT deptno, sum(sal) As totalsal FROM emp GROUP BY deptno HAVING COUNT(empno) > 2 43.Display the names of employees who are working in the company for the past 5 years. select ename from emp where sysdate-hiredate>5*365; 44.Display the list of employees who have joined the company before 30th June 90 or after 31st dec 90. select * from emp where hiredate between ‘30-jun-1990’ and ‘31-dec-1990’; 45.Display the names of employees working in department number 10 or 20 or 40 or employees working as clerks, salesman or analyst. select ename from emp where deptno in (10,20,40) or job in (‘CLERK’,’SALESMAN’,’ANALYST’); 46.Display the names of employees whose name starts with alphabet S. select ename from emp where ename like ‘S%’; 47.Display employee names for employees whose name ends with alphabet. select ename from emp where ename like ‘%S’;