Statics of Rigid Bodies (Exam Answers), Exams of Statics

Exam about Statics of Rigid Bodies: Multiple Choices

Typology: Exams

2020/2021

Available from 11/11/2023

Hannahli30
Hannahli30 🇵🇭

10 documents

1 / 9

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
Midterm Exam
ES 202 Statics of Rigid Bodies
This is the questionnaire part of this midterm exam. Go over the numbered questions and take
note of your answers by writing them in a sheet of paper. Once you are done with this
questionnaire open the answer sheet still found in the classwork and tick the circle in a number
that corresponds to the best answer. Points to be earned for a question is indicated below each
question and the highest possible score will be 90 points.
Multiple choice: Choose the letter that corresponds to the best answer.
1. According to principle of transmissibility of forces, the effect of a force upon a body is
A) maximum when it acts at the center of gravity of a body
B) different at different points in its line of action
C) the same at every point in its line of action
D) minimum when it acts at the C.G. of the body(2 points)
2. Which of the following is not a scalar quantity
A) Time B) mass C) volume D) acceleration
(2 points)
3. The forces, which meet at one point, but their lines of action do not lie in a plane, are called
A) coplanar non-concurrent forces B) non-coplanar concurrent forces
C) non-coplanar non-concurrent forces D) intersecting forces
(2 points)
4. The weight of a body is due to
A) gravitational force of attraction towards the center of the earth
B) force of attraction experienced by particles
C) centripetal force of earth
D) gravitational pull exerted by the earth
(2 points)
5. A force is completely defined when we specify
A) point of application B) direction C) magnitude D) all of the above
(2 points)
6. If a number of forces act simultaneously on a particle, it is possible
A) not a replace them by a single force B) to replace them by a single force
C) to replace them by a single force through C.G. D to replace them by a couple
pf3
pf4
pf5
pf8
pf9

Partial preview of the text

Download Statics of Rigid Bodies (Exam Answers) and more Exams Statics in PDF only on Docsity!

Midterm Exam ES 202 – Statics of Rigid Bodies This is the questionnaire part of this midterm exam. Go over the numbered questions and take note of your answers by writing them in a sheet of paper. Once you are done with this questionnaire open the answer sheet still found in the classwork and tick the circle in a number that corresponds to the best answer. Points to be earned for a question is indicated below each question and the highest possible score will be 90 points. Multiple choice: Choose the letter that corresponds to the best answer.

  1. According to principle of transmissibility of forces, the effect of a force upon a body is A) maximum when it acts at the center of gravity of a body B) different at different points in its line of action C) the same at every point in its line of action D) minimum when it acts at the C.G. of the body(2 points)
  2. Which of the following is not a scalar quantity A) Time B) mass C) volume D) acceleration (2 points)
  3. The forces, which meet at one point, but their lines of action do not lie in a plane, are called A) coplanar non-concurrent forces B) non-coplanar concurrent forces C) non-coplanar non-concurrent forces D) intersecting forces (2 points)
  4. The weight of a body is due to A) gravitational force of attraction towards the center of the earth B) force of attraction experienced by particles C) centripetal force of earth D) gravitational pull exerted by the earth (2 points)
  5. A force is completely defined when we specify A) point of application B) direction C) magnitude D) all of the above (2 points)
  6. If a number of forces act simultaneously on a particle, it is possible A) not a replace them by a single force B) to replace them by a single force C) to replace them by a single force through C.G. D to replace them by a couple

(2 points)

  1. Effect of a force on a body depends upon A) position or line of action B) direction C) magnitude D) all of the above (2 points)
  2. force acting on a body may A) retard its motion B) balance the other forces acting on it C) introduce internal stresses D) all of the above (2 points)
  3. Forces are called coplanar when all of them acting on body lie in A) one point B) one plane C) different planes D) perpendicular planes (2 points)
  4. Forces are called concurrent when their lines of action meet in A) one point B) perpendicular planes C) two points D) plane (2 points)
  5. The unit of force in S.I. units is A) kilogram B) newton C) pounds D) dyne (2 points)
  6. Identify the row that contains two scalars and one vector quantity. A) distance acceleration velocity B) speed mass acceleration C) distance weight force D) velocity force mass (2 points)
  7. A pupil follows the route shown in the diagram and arrives back at the starting point.

Answer: E (3 points)

  1. Identify which of the following quantities can be described by their magnitude and direction A) mass B) time C) speed D) acceleration (2 points)
  2. A physical quantity which has direction as well as magnitude is known as a: A) force B) vector C) scalar D) weight (2 points) 18.Which of the following is not a scalar quantity? A) velocity B) potential energy C) work D) kinetic energy (2 points)
  3. Which of the following is not a vector quantity? A) displacement B) density C) velocity D) acceleration (2 points)
  4. Two horses on opposite banks of a canal pull a barge moving parallel the banks by means of two horizontal ropes. The tension in these ropes are 200 kN and 240 kN, while the angle between them is 600. The magnitude of the resultant pull on the barge will be: 6pts A) R = 550 kN B) R = 440 kN C) R = 381.5 kN D) R = 440.5 kN (6 points)
  5. Four tug boats apply forces to an oil-rig as shown

Answer: C (3 points)

  1. With reference to Figure 19.32, which of the following statements is false?

A) R = 477 kN at Øx = 61.6^0 B) R = 477 N at Øx = 66^0 C) R = 500 kN at Øx = 61.6^0 D) R = 400 kN at Øx = 51.6^0 (6 points)

  1. From the given sets of parallel forces shown Which of the following gives the magnitude of the resultant force and its location from the left support? A) R = 90 kN, at 5 m from left support B) R = 190 kN, at 4 m from left support C) R = 100 kN, at 5 m from left support D) R = 150 kN, at 4.5 m from left support

(5 points)

  1. When two forces, each equal to P, act at 90^0 to each other, then the resultant will be?

A) 2P B) C) D)

(3 points)

  1. A rod AB carries three loads of 30 N, 70 N, and 100 N at a distance of 20 mm, 90 mm and 150 mm respectively from A. Neglecting the weight of the rod, the point at which the rod will be balance is ______? A) 109.5 mm from A B) 119.5 mm from A C) 125.5 mm from A D) 132.5 mm from A (5 points)
  2. The resultant of the force system shown below is; A) 545 lbs up to the right B) 654 lbs up to the right C) 545 lbs up to the left D) 654 lbs up to the left (7 points)
  3. In the figure below, the reactions at A and B are; A) Ra = 14 kN & Rb = 22 kN B) Ra = 22 kN & Rb = 14 kN C) Ra = 18 kN & Rb = 20 kN D) Ra = 14 kN & Rb = 8 kN