Download Technical Documents and more Exercises Engineering Science and Technology in PDF only on Docsity!
Technical Specification of Hard Top 4WD Jeep
Required No.: 1 (One)
S.No. CRITERIA BUYER'S REQUIREMENT OFFERD SPECIFICATION
1 General Five Doors, Right hand drive with 4 wheels drive hard top Jeep suitable for highly rough road driving in Nepal. Gross Vehicle Weight Shall not be less than 2500 kg also shall have seating capacity at least 7 passengers including driver.
Make:
Model:
Country of Origin:
Mfd. Year:
2 Engine 4 Cylinder, 4-Stroke, Engine displacement not less than 2100 cc, Water cooled diesel Engine, Developing Maximum rated power output not less than 140 Ps/ BHP and maximum torque should not be less than 320 Nm at governed RPM, Shall fully equipped with accessories for efficient full load operation of Jeep
Make:
Model:
3 Emission Standard
The Emission Standard of the vehicle must be in compliance with or superior than the applicable standard prescribed by Nepal Vehicle Mass Emission Standards, which is to be certified by Department of Transport Management, Nepal. 4 Gauges To include speedometer, Water Temperature, Fuel, Oil Pressure etc. As necessary for efficient operation and Maintenance. 5 Clutch Single Plate/Dry-friction. 6 Transmission Manual shift at least six forward and one reverse, all forward synchromesh 7 Ground Clearance
High Ground Clearance will be preferred.
Minimum 180 mm 8 Suspension Leaf Spring/Coil Spring/Anti roll bar/torsion bar/ Telescopic Shock absorbers at front and rear. 9 Tires Standard Size, Radical 10 Steering Hydraulic Power Assisted.
11 Brakes Front: Ventilated Disc Type.
Rear: Disc/Drum Type, Hydraulic Operated on all wheels and Parking Brake.
12 Body/Cab Four Side doors and one back door, all metallic cab with insulated roof, laminated/tinted glass windscreen, Front and rear washers and wiper, glass windows on doors, right hand drive, comfortable and adjustable seats for driver and passengers, floor mats, two sun visor, rear view mirror and power/manual two side view mirror.
13 Chassis and Frame
Steel, heavy duty with tow hook
14 Essential Accessories
- Head light, tail and rear light, reversing light and Turn signals.
- Cabin light
- Odometer/Speedometer
- Heavy Duty Mud guards front and rear
- One spare wheel with tire and tube
- Hydraulic Jack with handle
- Air bag for driver and co-passenger
- Seat belts for driver and co-passenger
- Air Conditioner with heater
- Speed alert system
- Power windows( Front/Rear)
- Center locking
- ABS System
- CD/PM3 Player/Radio AM/FM
To be equipped with all accessories offered in standard model but not limited to the above items.
15 Instructions All signs and instructions in the vehicle shall be in English.
Technical Specification of Hard Top 4WD Jeep
Required No.: 1 (One)
S.No. CRITERIA BUYER'S REQUIREMENT OFFERD SPECIFICATION
1 General Five Doors, Right hand drive with 4 wheels drive hard top Jeep suitable for highly rough road driving in Nepal. Gross Vehicle Weight Shall not be less than 2500 kg also shall have seating capacity at least 7 passengers including driver.
Make:
Model:
Country of Origin:
Mfd. Year:
2 Engine 4 Cylinder, 4-Stroke, Engine displacement not less than 2100 cc, Water cooled diesel Engine, Developing Maximum rated power output not less than 85 kw/ BHP and maximum torque should not be less than 260 Nm at governed RPM, Shall fully equipped with accessories for efficient full load operation of Jeep
Make:
Model:
3 Emission Standard
The Emission Standard of the vehicle must be in compliance with or superior than the applicable standard prescribed by Nepal Vehicle Mass Emission Standards, which is to be certified by Department of Transport Management, Nepal. 4 Gauges To include speedometer, Fuel, Oil Pressure etc. As necessary for efficient operation and Maintenance. 5 Clutch Single Plate/Dry-friction.
6 Transmission Manual shift at least five forward and one reverse, all forward synchromesh 7 Ground Clearance
Minimum 180 mm will be preferred
8 Suspension Leaf Spring/Coil Spring/torsion bar/Shock absorbers at front and rear. 9 Tires Standard Size, Radical
10 Steering Hydraulic Power Assisted.
11 Brakes Front: Ventilated Disc Type
Rear: Disc/Drum Type
12 Body/Cab Four Side doors and one back door, all metallic cab with insulated roof, laminated/tinted glass windscreen, washers and wiper, glass windows on doors, right hand drive, comfortable and adjustable seats for driver and passengers, floor mats, two sun visor, rear view mirror and power/manual two side view mirror.
13 Chassis and Frame
Steel, heavy duty with tow hook
14 Essential Accessories
- Head light, tail and rear light, reversing light and
Turn signals.
- Cabin light
- Odometer/Speedometer
- Mud guards
- Heavy Duty front bumper
- One spare wheel with tire and tube
- Hydraulic Jack with handle
- Air bag for driver and co-driver
- Seat belts for driver and co-driver
- Air Conditioner with heater
- Anti-theft warning
- Power windows( Front/Rear)
- Center locking
- ABS System
Technical Specification of Double Cab Pick-Up Vehicle
Required No.: 4 (Four)
S.No. CRITERIA BUYER'S REQUIREMENT OFFERD SPECIFICATION
1 General Four Doors, Right hand drive with 4 wheels drive Pick-Up suitable for highly hills rough road driving in Nepal. Gross Vehicle Weight Shall not be less than 2100 kg also shall have seating capacity at least 5 passengers including driver.
Make:
Model:
Country of Origin:
Mfd. Year:
2 Engine 4 Cylinder, 4-Stroke, Engine displacement not less than 2100 cc, Water cooled diesel Engine, Developing Maximum Gross power not less than 120 Hp with torque not less than 260 Nm at governed RPM, Shall fully equipped with accessories for efficient full load operation of Pick-Up.
Make:
Model:
3 Emission Standard
The Emission Standard of the vehicle must be in compliance with or superior than the applicable standard prescribed by Nepal Vehicle Mass Emission Standards, which is to be certified by Department of Transport Management, Nepal. 4 Gauges To include speedometer, Water Temperature, Fuel, Oil Pressure etc. As necessary for efficient operation and Maintenance. 5 Clutch Single Plate/Dry-friction. 6 Transmission Manual shift at least Five forward and one reverse, all forward synchromesh 7 Ground Clearance
High Ground Clearance will be preferred.
Minimum 200 mm 8 Suspension Front: Coil Spring/torsion bar/Shock absorbers
Rear: Leaf Spring/Coil Spring 9 Tires Standard Size, Radical
10 Steering Hydraulic Power Assisted.
11 Brakes Front: Ventilated Disc caliper Type
Rear: Disc/Drum Type
12 Cab Four Side doors, all metallic cab with insulated roof, laminated/tinted glass windscreen, washers and wiper, glass windows on doors, right hand drive, comfortable seats for driver and passengers, floor mats, two sun visor, rear view mirror and power/manual two side view mirror.
13 Chassis and Frame
Steel, heavy duty with tow hook
14 Fuel Tank Capacity
Not Less than 75 liters
15 Essential Accessories
- Head light, tail and rear light, reversing light and
Turn signals.
- Cabin light
- Odometer/Speedometer
- Mud guards
- One spare wheel with tire and tube
- Hydraulic Jack with handle
- Cargo Box
Technical Specification of Motorcycle
Required No.: 12 (Twelve)
S.N. Criteria Requirements Offered Specification
1 General Motorcycle should be suitable for normal and rough road driving in Nepal, altitude up to 2000 meter, ambient tempreturee-5 to 50 degree
Make:
centigrade. Kerb weight of the motorcycle shall not be greater than 170 kgs and seating capacity must be 2 passengers including driver.
Model:
Country of Origin:
Mfd. Year:
2 Engine Single cylinder, Four strokes, , Air cooled Petrol Engine, Engine Displacement 1505%cc, Developing Maximum Power Output not less than 12Ps and Maximum Torque not less than 12 Nm, for efficient running of Motorcycle. Electric as well as Kick starting. 3 Emission Standard
The Emission standard of the Vehicle should comply with the vehicle Mass Emission Standard of Nepal. 4 Gauges To include speedometer/odometer, Turn Single Indicator, Neutral Indicator, Fuel Gauge etc. As necessary for efficient operation and maintenance. 5 Transmission Minimum Five speed, Constant mesh
6 Fuel Tank Minimum 12 Ltr.
7 Brake Front: Disc and Rear: Drum/Disc
Wheel base not less than 1300 mm 8 Suspension Front: Telescopic Rear: Mono/Twin Shock absorber with Nitro 9 Frame Sturdy frame and Suspension with telescopic shock absorbers
Minimum Ground Clearance: 160mm
10 Essential Accessories
- Head light, rear and turn signal lights
- Two rear view mirrors
- Alloy Wheel
- Safety Lock for Handel
- Seat for Co-rider
Technical Specification of Scooter
Required No.: 5 (Five)
S.N. Criteria Requirements Offered Specification
1 General Petrol Engine Scooter of sturdy design, Type vehicle suitable to operate in rough road and hilly road condition of Nepal. Kerb weight shall not be more than 110 kg and shall have seating capacity for at least 2 passengers including driver.
Make:
Model:
Country of Origin:
Mfd. Year:
2 Engine Air-cooled, four stroke, displasement of the engine 11510%cc power output not less than 7bhp @ optimum rpm and minimum torque 8nm @ optimum rpm 3 Gauge Speedometer, Fuel etc. As necessary for the efficient operation and maintenance 4 Transmission Automatic 5 Tyre Size Standard 6 Dimension Wheelbase: Minimum 1250mm, Ground Clearance: Minimum125mm 7 Suspension and Brakes
Suspension Brakes
Standard Front: Drum Rear:Drum 8 Fuel Tank Minimum 4 ltrs. 9 Chassis and Frame
Steel, Heavy duty suitable for rough road conditions 10 Essential Accessories
The vehicle should be equipped with:
- Head light, tail light and turn signal
- Odometer
- Mud guards
- Helmet 11 Starting Type Electric and Kick 12 Instructions All sings and instructions in the vehicle shall be in English 13 Manuals One copy of the Operator's and Owner's instructions and Maintenance manual in English shall be supplied with each vehicle. 14 Proven Performance
- The Scooter offered shall be a current model under standard Production by the manufacturer for at least one year.
- The bidder shall provide the manufacturer's data of the performance of the unit to include the fuel consumption, performance curve of the engine etc. 15 Tools A set of tools for general maintenance shall be supplied. 16 Color Standard 17 Warranty Manufacturer shall provide a Minimum One year warranty after acceptance 18 Delivery The 5 Unit of Scooter shall be delivered to Ministry of Land Management, Agriculture and Cooperative, Province -5, Butwal, Rupandehi.
ADD
Tyre Type: Tubeless/ tube
