









Study with the several resources on Docsity
Earn points by helping other students or get them with a premium plan
Prepare for your exams
Study with the several resources on Docsity
Earn points to download
Earn points by helping other students or get them with a premium plan
Winpower for VMware ESXi (USB, RS232)
Typology: Summaries
1 / 17
This page cannot be seen from the preview
Don't miss anything!










Winpower can be installed on any of the Guest OS, just as windows, Linux, Mac OSX, Solaris. Please make sure the “ VMware tools ” are installed for all the Guest OS. The guest OS that is installed Winpower is the Critical VM.
Winpower can be installed on the other physical Computer at the same network with VMware ESXi, just like Windows, Linux, Mac OSX, Solaris. Please make sure the “ VMware tools ” are installed for the all the Guest OS.
Choose the critical guest OS that Winpower is installed , Add the USB controller by the “ Summary ”->” Edit setting ”->” add ”->” USB Controller ” Choose the critical guest OS that Winpower is installed, Add the USB device by the “ Summary ”->” Edit setting ”->” add ”->” USB device ”, make sure the UPS is connected.
The UPS USB can be added successfully as below image Restart the guest OS after adding the USB controller and USB device
Choose the critical guest OS that Winpower is installed, Add the USB device by the ” Edit settings ”->” add other device ”->” USB device ”
Power off the critical guest OS that Winpower is installed, right click it. Add the serial port by the “ Summary ”->” Edit setting ”->” add ”->” Serial Port ”->” Use physical serial port ”, the serial port name is “/dev/char/serial/uart0” as default. Restart the guest OS after adding the serial port
Power off the critical guest OS that Winpower is installed, right click it. Add the serial port by the ” Edit settings ”->” add other device ”->” Serial Port ”->
Choose “Use physical serial port” Restart the guest OS after adding the serial port
The UPS can be added successfully as below image
Choose the critical guest OS that Winpower is installed ,Add the USB device by the “ Summary ”->” Edit settings ”->” add other device ”->” USB device ”
The UPS USB-RS232 can be added successfully as below image
the “/opt/MonitorSoftware” to start the Winpower manager
If the Winpower communication with UPS via USB or RS232, just auto search it by “System” - >”Auto search device” Windows OS: Linux OS:
If the Winpower communication with UPS via USB-RS232: On the Windows OS, you should install the USB-RS232 driver, then restart the system and auto search the device. On the Linux OS, you don’t need to install the USB-RS232 driver, you should add the serial port name by “System” - >”Com port Setting”, add the serial port name “/dev/ttyUSB0”, then auto search the device
Open Winpower manager, Click “Device” - > ”Shutdown Parameter”, Set the shutdown
Please check the Winpower box “Shutdown all the VMs before host shutdown” , Winpower will shut down all the no-critical VMs firstly, then shutdown the critical VMs and hosts. If you have enable the “Autostart” as below image: Please don’t check the box “Shutdown all the VMs before host shutdown”, so Winpower only shut down the hosts. The VMs will be shut down before host shutdown by the “Autostart” function.