Download Boiling point and more Study notes Chemistry in PDF only on Docsity!
Boiling point
The boiling point of a liquid is the temperature at which the vapor pressure of the liquid equals the external environmental pressure surrounding the liquid.
The boiling point of a liquid may also be defined as the temperature at which it changes state from a liquid to agas throughout the bulk of the liquid. At that point, bubbles of vapor which form below the surface of the liquid contain vapor at a pressure which matches the external pressure. Thus, they are not crushed by the surrounding liquid and their buoyancy causes them to rise through to the surface of the liquid and give the familiar appearance of a boiling liquid as seen in the adjacent photograph of boiling water.[1][2]
A liquid in a vacuum environment has a lower boiling point than when the liquid is at atmospheric pressure. A liquid in a high pressure environment has a higher boiling point than when the liquid is at atmospheric pressure. In other words, the boiling point of a liquid varies with and depends upon the surrounding environmental pressure.
The boiling point increases with increased pressure up to the critical point, where the gas and liquid properties become identical. The boiling point cannot be increased beyond the critical point. Likewise, the boiling point decreases with decreasing pressure until the triple point is reached. The boiling point cannot be reduced below the triple point.
Liquids may change to a vapor at temperatures below their boiling points through the process of evaporation. Evaporation is a surface phenomenon in which molecules located near the vapor- liquid surface escape into the vapor phase. On the other hand, boiling is a process in which molecules anywhere in the liquid escape, resulting in the formation of vapor bubbles within the liquid. Liquids are converted into their vapor phase very much more rapidly by boiling than by evaporation.
The normal boiling point
The normal boiling point (also called the atmospheric boiling point ) of a liquid is the special case in which the vapor pressure of the liquid equals 101.325 kilopascals (kPa).[3][4] Usually, boiling points are published with respect to the atmospheric pressure (101.325 kPa or 1 atm) at sea level, which is also known as the "standard atmosphere".[5]^ In other words, published boiling points of liquids are usually the normal boiling points of the liquids.
Estimation of the normal boiling point
The heat of vaporization is the amount of heat required to convert or vaporize a saturated liquid (i.e., a liquid at its boiling point) into a vapor.
If the heat of vaporization and the vapor pressure of a liquid at a certain temperature are known, the normal boiling point can be estimated using this rearranged form of the Clausius-Clapeyron equation:[6][7]
Saturation temperature and pressure
A saturated liquid contains as much thermal energy (i.e., heat) as it can without boiling into a vapor and, conversely, a saturated vapor contains as little thermal energy as it can without condensing into a liquid.
The higher is the vapor pressure of a liquid at a given temperature, the lower the normal boiling point of the liquid.
The vapor pressure chart to the right has graphs of the vapor pressures versus temperatures for a variety of liquids.[8]^ As can be seen in the chart, the liquids with the highest vapor pressures have the lowest normal boiling points. For example, at any given temperature, methyl chloride has the highest vapor pressure of any of the liquids in the chart. It also has the lowest normal boiling point (– 26 °C), which is where the vapor pressure curve of methyl chloride (the blue line) intersects the horizontal pressure line of one atmosphere (1 atm) of absolute vapor pressure.
In terms of intermolecular forces, the boiling point represents the point at which the liquid molecules possess enough thermal energy to overcome the various intermolecular attractions binding the molecules into the liquid.
Therefore the boiling point is also an indicator of the strength of those attractive forces. The higher the intermolecular attractive forces are, the more difficult it is for molecules to escape from the liquid and hence the lower is the vapor pressure of the liquid. The lower the vapor pressure of the liquid, the higher the temperature must be to initiate boiling. Thus, the higher the intermolecular attractive forces are, the higher is the normal boiling point.[9]
References
- Safety Glossary: Boiling Point, Physical and Theoretical Chemistry Laboratory, Oxford University.
- Edward W. Washburn (1915), An Introduction to the Principles of Physical Chemistry, 1st Edition, McGraw-Hill, p. 55, Library of Congress Control No. 15024872.
- IUPAC Gold Book: normal, International Union of Pure and Applied Chemistry (IUPAC), Compendium of Chemical Terminology (the "Gold Book"), 2nd Edition, Version 2.3, October 11, 2011.
- Editor: David R. Lide (2004), CRC Handbook of Chemistry and Physics, 85th Edition, CRC Press, p. 3-1, ISBN 0- 8493 - 0485 - 7.
- IUPAC Gold Book: satandard atmosphere, International Union of Pure and Applied Chemistry (IUPAC), Compendium of Chemical Terminology (the "Gold Book"), 2nd Edition, Version 2.3, October 11, 2011.
- John M. Seddon and Julian D. Gale (2001), Thermodynamics and Statistical Mechanics, Royal Society of Chemistry, ISBN 0- 85404 - 632 - 1.
- The Clausius-Clapeyron Equation, Professor Chung Chieh, University of Waterloo, Canada.
- Editors: R.H. Perry and D.W. Green (1997), Perry's Chemical Engineers' Handbook, 7th Edition, McGraw-Hill, ISBN 0- 07 - 049841 - 5.
- The Forces Between Molecules, Innovative Teaching Lab (ITL), Chemistry Department, University of Florida.
Source: http://www.eoearth.org/view/article/51cbf2567896bb431f6a8d95/?topic=51cbfc98f702fc2ba812eaa 6
