Communication system l ab
Lab no 03:
Objective:
Introduction to SIMULINK System.
apparatus:
MATLAB Software.
Procedure:
In this lab we performed various fundamental tasks on simulink
system.
First open the matlab software then select the simulink library.
Now open the new model and select the component which are
required to built the model.
In this lab we built a basic adder model by using the adder which add
the different signal of different frequency and amplitude produces by
sine wave generator .
We can change the numbers of input of adder and also we can change
the frequency as well as amplitude of signal generated by sine wave
generator .
Alongside this we simulated the results using the scope block.
Simulink demonstration:
