IICRC FSRT Exam Study Guide, Exams of Safety and Fire Engineering

IICRC FSRT Exam Study GuideIICRC FSRT Exam Study Guide

Typology: Exams

2025/2026

Available from 01/16/2026

LEARNERSTORE
LEARNERSTORE 🇺🇸

4.1

(11)

3.4K documents

1 / 28

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
IICRC FSRT Exam Study Guide
1.
3 basic components of a fire: Fuel, Heat,
Oxygen
2. Toxic materials are released into the air during what processes?:
Demolition and
reconstruction
3.
When working in areas with loose soot residue,: Utilize appropriate
engineering tools, PPE,
AFDs
4. The average size of a smoke particulate is: .1 - 4
microns
5.
Smoke
residue
is
commonly
comprised
of:
Carbon, Oxides of
nitrogen
6. When soot reside combines with moisture or humidity it forms: Acid
residue
7. M
1
pf3
pf4
pf5
pf8
pf9
pfa
pfd
pfe
pff
pf12
pf13
pf14
pf15
pf16
pf17
pf18
pf19
pf1a
pf1b
pf1c

Partial preview of the text

Download IICRC FSRT Exam Study Guide and more Exams Safety and Fire Engineering in PDF only on Docsity!

IICRC FSRT Exam Study Guide

  1. 3 basic components of a fire: Fuel, Heat, Oxygen
  2. Toxic materials are released into the air during what processes?: Demolition and reconstruction
  3. When working in areas with loose soot residue,: Utilize appropriate engineering tools, PPE, AFDs
  4. The average size of a smoke particulate is: .1 - 4 microns
  5. Smoke residue is commonly comprised of: Carbon, Oxides of nitrogen
  6. When soot reside combines with moisture or humidity it forms: Acid residue
  7. M

ajor factor in determining the temp of the fire is the amount of available: Oxygen

  1. Soot residues gravitate or migrate to: Cooler surfaces
  2. A by-product of incomplete combustion classified as carcinogenic: Polycyclic Aro- matic Hydrocarbons (PAH)
  3. Insurance term meaning "stop further damage": Loss mitigation
  4. A techs ability to effectively restore soot contaminated surfaces are impacted by:: Location to heat line soot is oily/greasy/baked on amount of moisture present
  5. which soot residue is easily smeared and tends to be black: Plastic or rubber residue
  1. Employers are required to: Prepare a hazard assessment on all projects Issue necessary safety equipment Provide ongoing safety training
  2. Ultimately your customer with financial responsibility is the: insured property owner authorized agent
  3. When using chemicals its important to: use measuring cup follow label
  4. Terminology should be: clear, concise, simple in communication
  5. 3 involved parties in an insurance claim are: Insured/Property owner Adjuster Insurance company
  1. What is a high valued item: anything important to customer
  2. When dealing with a high valued item, techs should: document and inspect condition
  3. What form should be signed prior to the commencement of work: work autho- rization
  4. Two structural materials used in construction that are classified as potential- ly carcinogenic:: Lead Asbestos
  5. When inspecting the degree of damage to contents consider its relationship to the line.: Heat
  6. What three values justify the amount of time, effort that should be spent on an item?: Monetary value

basements/attics are of value: questionable

  1. Primary mission of a restoration tech is to preserve: fabrics and surfaces
  2. Process to stop further damage is referred to as loss : mitigation
  3. Restoration tech should strive to use and equipment efficiently: products
  4. Mapping out on paper the various tasks to be performed is: Integral strategy and planning
  5. A "last resort" cleaner for stone, grout, calcium deposits and aluminum is a

cleaner: Acid cleaner

  1. A low alkaline ph 7-10 is referred to as a: general purpose detergent
  2. Concentrated chemicals should be or into water: diluted poured
  3. Chlorine bleach can dissolve protein fibers (wool), corrode metals and discol- or : nylon
  4. Which products contain dry solvents, detergents, polishes, and deodorants to clean finished wood surfaces?: wood restoration creme
  5. a high alkaline cleaner above 10 ph is referred to as a heavy-duty - : degreaser

deodorant

  1. Most odor control agents contain a combination of and agents: Masking Pairing
  2. The chemical symbol of is O3: Ozone gas
  3. Insure safe chemical concentrations by utilizing a cup: Measuring
  4. When using a thermo fogger, safety concerns include:: Open flame explosion Oil residue

Respiratory irritant

  1. A thermal fogger can produce a molecule size of: .5 - 2 microns
  2. a ULV fogger can produce a molecule size of: 8 - 15 microns
  1. The most difficult odor to deal with is the odor: psychological
  2. Odor control should begin in the area: source
  3. The universal first step in odor control is to: remove the source
  4. The second principle in odor control is to the source area: clean
  5. The third principle in odor control is to recreate the conditions of : penetration
  6. The fourth principle of odor control, if applicable is to the

source area: seal/encapsulate

  1. Ozone can molecularly break down : rubber
  2. What equipment uses UV light and ambient moisture to destroy odors?: Hy- droxyl Generator
  3. The direct spraying of a charred surface to contain the odor is called: Chemical containment
  4. Complete smoke/odor removal will usually require a: series of techniques
  5. When a structural support member is charred, it may require:: a replacement with new to be reinforced after a char
  1. When dealing with the components of a HVAC system, they should be checked by a qualified or subcontractor: Mechanical Licensed
  2. Several questions need to be answered during the inspection of the HVAC, such as:: are branch lines attected was the system operating at the time of the fire what type of soot residue has occurred
  3. Regardless of which cleaning method is chosen or required, structural clean- ing begins at:: the ceiling shifting to the upper structural

surfaces then to the floor areas

  1. It is important, whenever possible to remove surfaces at the onset of a project: Char
  2. What is widely used as a insulating/fire retardant prior to 1977?: Asbestos
  3. The first and safest step, as a a rule, in removing soot residue is via: Dry removal
  4. A dry sponge works by the process: adsorption
  5. Painted surfaces prior to 1986 often incorporated: lead paint
  6. Damp (wet)
  1. Deodorization of wood furniture or cabinets can be effective with a - based solution deodorant and oil-based furniture : Petroleum Polish
  2. When working with unfinished wood, always clean in the direction of the wood : grain
  3. If a has been applied to masonry surfaces, it will greatly simplify the cleaning.: Sealer
  4. Aggressive wet cleaning may ceiling coatings: dissolve
  5. W

hen cleaning windows, the techs responsibility extends also to the and hardware: Frames

  1. When dealing with light fixtures, the first step is to ensure that the : Power is off
  2. Cleaning of fixtures can be done effectively with a compound.: fiberglass crème compound
  3. When cleaning vent hoods in kitchens consider cleaning the exhaust vent and replace the vent hood .: hood (including exhaust piping)