Download OSHA 10-hr Course Questions And Answers With Verified Tests 100% Correct Answers and more Exams Workplace Safety in PDF only on Docsity!
OSHA 10-hr Course
"Negative Motivators" leading to unsafe acts include: - ✔️ ✔️ negative safety attitudes, pressure to produce the product as opposed to working safely, cost related issues that can impact work performance
A clean and organized job site is a key component of a safe job site. Clean up must occur routinely during the day and not just at the end of the work shift. Work areas shall be inspected _____ for adequate housekeeping. - ✔️ ✔️ daily
A competent person is capable of ____ hazards in the work environment and is authorized to take _____ measures. - ✔️ ✔️ identifying; corrective
7 Safe Lifting Considerations - ✔️ ✔️ weight of object, frequency of lifts, location (position of load), size of material and hand grip, stability of the load, avoidance of twisting and stooping, other environmental factors
A _____ must be available to direct workers who are constructing or moving scaffolds. - ✔️ ✔️ competent person
A _____ or control switch cuts off power to the machine when pressure is released. - ✔️ ✔️ constant-pressure
A _____ system is a process that restricts access to the roof only to authorized employees. - ✔️ ✔️ roof permit
A change in safety culture requires: - ✔️ ✔️ learned beliefs, values, and shared assumptions, stability, consistency and meaning, mutual trust and respect
A change in safety culture requires: - ✔️ ✔️ positive role models and leaders that are committed to doing the right things
_______ must be cleared from the scaffold to eliminate slippery conditions as soon as possible. - ✔️ ✔️ ice, snow
"A person who must supervise scaffolds as they are being erected, move, taken apart, or changed, and must inspect the scaffolding at completion to ensure compliance" is called a _____ - ✔️ ✔️ competent person
A constant pressure switch is required for all hand-held power drills, fasteners, and grinders. - ✔️ ✔️ True
A good source for examples of accidents related to caught between hazards can be found on: - ✔️ ✔️ OSHA's website
A good strategy for taking the STSC exam is to - ✔️ ✔️ answer all questions even if you have to guess
A hazard is a situation or condition that has the potential to cause harm to which of the following? - ✔️ ✔️ Life, Health, Property, Environment
A landing platform for fixed ladders over 20 feet high must be constructed every 20 feet if there is no cage, well, or ladder safety device. - ✔️ ✔️ True
A power-actuated tool must not be able to operate until it is pressed against a work surface with a force of at least _____ pounds greater than the total weight of the tool. - ✔️ ✔️ 5
A properly installed and used standard GFCI receptacle can prevent ____. - ✔️ ✔️ electrocution, electrical shock
A typical construction activity is most at risk for contact with underground energized electrical systems is? - ✔️ ✔️ excavation activities, jackhammering, fence installation, earth drillers
A worker or worker representative can file a complaint about a safety or health hazard in the workplace - ✔️ ✔️ True
Additional precautions must be taken to protect visitors and the public from struck- between hazards such as: - ✔️ ✔️ using traffic signs, barricades, and flaggers when working on or near public roadways, control site access, visitors should have safety orientation and be escorted
AEGCP refers to - ✔️ ✔️ Assured Equipment Grounded Conductor Program
Airless Spray Guns operating at more than _____ pounds per square inch pressure must have an automatic or visible safety device that prevents your pulling the trigger: - ✔️ ✔️ 1000
All pull boxes, junction boxes, and fittings must be - ✔️ ✔️ provided with covers, metal covers should be grounded
By definition, a hazard is any situation or condition that has the potential to cause harm to: - ✔️ ✔️ life, health, property, or the environment
Caught between hazards can result in: - ✔️ ✔️ multiple lacerations, broken bones, asphyxiation, death
Caught in or between accidents are preventable through: - ✔️ ✔️ planning, hazard identification, hazard mitigation
Climbing across the cross braces of scaffolds is allowed. - ✔️ ✔️ Never
Common injuries resulting from handling materials include: - ✔️ ✔️ back injuries, crushing injuries, cuts, lacerations
Common ladder materials include ea of the following: - ✔️ ✔️ wood, fiberglass, aluminum
Common safety measures that can help you avoid beign involved in a struck by incident are: - ✔️ ✔️ do not exceed a vehicle's rated load or lift capacity, do not carry personnel unless there is a safe place to ride, make sure that all personnel are in the clear before using dumping or lifting devices
Competent person must be designated for: - ✔️ ✔️ scaffold erection, inspections of excavation, the adjacent areas, and protective systems, continuing inspections during demolition, engineering survey prior to demolition of a structure
Controlling hazardous energies _____. - ✔️ ✔️ is required by OSHA, is the best way to prevent the release of energizing, starting or stored energy, involves locking out and tagging equipment and verifying zero energy exists before starting work
Conveyor systems present many hazards when in operation. However, when shut down for maintenance, what is especially important? - ✔️ ✔️ lockout and tag out the system
Cords that are not 3-wire type, not designed for hard-usage, or that have been modified
- ✔️ ✔️ increase the risk of contacting electrical current
D rings and snap-hooks must have a minimum tensile strength of ____. - ✔️ ✔️ 5000 lbs
Do not use a powder-actuated tool in an explosive or flammable atmosphere. - ✔️ ✔️ True
During an OSHA inspection: - ✔️ ✔️ You have the right to talk to the inspector privately
Each of the following is true of temporary stairs: - ✔️ ✔️ pan stairs must be filled, treads must be non-slip material, slippery conditions must be corrected immediately
Electrical burns can be caused by: - ✔️ ✔️ arc flash, thermal contact, electrical shock
Electrical burns occur principally because of - ✔️ ✔️ the heat generated by the flow of electrical current through the body
Electrical PPE with the following defects may not be used: - ✔️ ✔️ if holes, tears, punctures, or cuts are present, texture changes (swelling, softening, hardening, or becoming sticky or inelastic), contains embedded foreign objects, any other defect that damages the insulating properties
Electricians should wear __________ hand and arm protection meeting ANSI specifications, - ✔️ ✔️ rubber
Emergency equipment must be installed: - ✔️ ✔️ on the same level as the posing hazard, with travel path free from obstructions
Emergency Eye/Body wash equipment should be tested at a minimum: - ✔️ ✔️ following repairs on equipment, at least monthly
Emergency eye/body wash temperature should be tepid, 78 to 92 degrees F range - ✔️ ✔️ True
Employees are responsible to: - ✔️ ✔️ comply with all OSHA standards and rules, comply with all company established health and safety requirements, be held responsible for complying to established requirements
Employees must not work on scaffold until ____. - ✔️ ✔️ It is determined to have strength and structural integrity to support intended weight
Employers are required to do which of the following: - ✔️ ✔️ provide protection for workers during trenching and excavation work, provide means to avoid the collapse of structures and scaffolds, designate a competent person, provide effective safety training for workers.
Employers covered by OSHA's standards must display an "It's the Law!" poster. What does this poster address? - ✔️ ✔️ health and safety information
Employers must ensure exposed moving parts of power tools, such as belts, gears, shafts, and pulleys: - ✔️ ✔️ are guarded
FED OSHA requires fall protection on construction sites be used at: - ✔️ ✔️ 6 ft
Fixed ladders 24 feet or higher must be equipped with: - ✔️ ✔️ rest platform, self- retracting lifeline, a cage
Flexible cords must _____. - ✔️ ✔️ not be run through holes in walls, ceilings, or floors, not be run through doorways, windows, or similar openings, be protected at all times, not be hidden in walls, ceilings, floors, conduit, or other raceways
Flying particles cause the greatest number of eye injury cases. - ✔️ ✔️ true
For effective Lock Out/Tag Out to occur, at a minimum, all energy sources must be isolated in the off position, zero energy verified, and each worker must apply his/her individual lock on the locking device and keep the key with ____. - ✔️ ✔️ themselves
For jack hammers and chipping guns, use: - ✔️ ✔️ heavy rubber grips, safety glasses, foot protection
For protection from electrical hazards and arc flash, always use the proper rubber insulating gloves and ensure they are classified by ___. - ✔️ ✔️ the level of voltage and protection they provide
Frequency cited OSHA ladder violations include which of the following? - ✔️ ✔️ ladder not extended 3 ft above the landing, no worker training, failure to secure ladder against movement, improper use of the top step of stepladders
From your choices below, what would you consider to be a "major" fall hazard in construction? - ✔️ ✔️ roof edges and floor openings, steel erection, improper scaffold construction, unsafe use of portable ladders
Fuses and circuit breakers are intended primarily for the: - ✔️ ✔️ protection of conductors and equipment
GFCI is an acronym that stands for _____? - ✔️ ✔️ Ground Fault Circuit Interrupter
Goggles can be worn in combination with spectacles or corrective lenses - ✔️ ✔️ True
Hand arm vibration (HAV) can - ✔️ ✔️ result from using hand-held power tools, cause carpal tunnel syndrome in the fingers and hands, result in the loss of sense of touch
Hard hats should be insulated and nonconductive and be of Class ____. - ✔️ ✔️ B and E
Hardhats are designed to protect you from many hazards on the job site, including _______. - ✔️ ✔️ overhead hazards, falling objects, flying objects, many other construction hazards
Hazard communication training must include: - ✔️ ✔️ how the program is implemented, how employees can protect themselves from chemical hazards
Hazards are created when flexible (extension) cords, cord connectors, receptacles, and cord and plug connected equipment are - ✔️ ✔️ improperly used and maintained,
Hazards of pneumatic tools include: - ✔️ ✔️ potential for air hoses to whip, excess pressure, tripping hazards (hoses)
Head protection must do two things: - ✔️ ✔️ resist penetration and absorb the shock of the blow
Heat illness may present life-threatening symptoms including: - ✔️ ✔️ high body temp (with hot/dry skin), confusion and disorientation, convulsions and fainting
Heavy duty, industrial-rated Type 1A ladders have a ______ pound weight limitation - ✔️ ✔️ 300
Hierarchy of Controls (From most effective to least effective) - ✔️ ✔️ elimination, substitution, engineering controls, administrative controls, PPE (personal protective equipment)
Horizontal lifelines shall be designed, installed, and used under the supervision of a ____ as part of a complete personal fall arrest system, which maintains a safety factor of at least two. - ✔️ ✔️ qualified person
If a person is being shocked: - ✔️ ✔️ don't touch them, try to safely turn off the source of electricity, using non-conductive material, try to move the person away from the electrical source
If an air hose is greater than 1/2 inch in diameter, a ____ must be installed: - ✔️ ✔️ safety excess flow valve
If more than one type of PPE is effective to control a hazard, it is a good idea to give employees a choice in its selection - ✔️ ✔️ true
If powder-actuated tools misfires, hold it in operating position for at least ____ seconds before re-firing. - ✔️ ✔️ 30
JHA for roofing activities should be conducted prior to starting work to systematically identify, evaluation, and ____. - ✔️ ✔️ control or mitigate all hazards
JHA is an acronym for which of the following? - ✔️ ✔️ Job Hazard Analysis
Keys for safety leadership include: - ✔️ ✔️ individuals with great communication skills, individuals work to gain trust and respect of others, the overall sharing of vision and passion
Ladder selection is primarily based upon what critical factors? - ✔️ ✔️ load, size, and task
Ladders must be inspected: - ✔️ ✔️ after any occurrence, be a competent person, prior to use, on a periodic basis
Light duty ladders have a maximum weight limit of: - ✔️ ✔️ 200 pounds
Lumber must not be stacked any higher than: - ✔️ ✔️ 20 feet with mechanical equipment and 16 feet when stacked manually
Main causes of struck-by hazards may include: - ✔️ ✔️ improper rigging and rigging failures, working on pressurized systems
Make sure all loads carried by equipment are stable and _____. - ✔️ ✔️ secured
Manufacturers should be consulted with regard to paint or cleaning materials because some cleaning materials may damage shell and reduce protection. - ✔️ ✔️ True
Many of the hazards involved in material handling are common and very predictable. Hazards can be found in both handling and storing materials. Improper storage hazards include which fo the following? - ✔️ ✔️ materials stacked too high or on top of other unstable materials
Means of egress in a trench must be within _____ of employees in a trench 4 feet or more deep. - ✔️ ✔️ 25 feet
Modern ladders are so well-made that safety and inspection are rarely a concern. - ✔️ ✔️ False
Muzzle end of the powder-actuated tool must have a protective shield or guard that will not allow the tool to operate unless depressed. - ✔️ ✔️ true
Never allow materials, supplies, or obstructions to block? - ✔️ ✔️ an access route, an egress route
Never place yourself between moving materials and a/n _____ structure, vehicle, or _____ materials. - ✔️ ✔️ immovable, stacked
New and improved tools and technologies exist that help prevent inadvertent contact with underground energized utilities and they include: - ✔️ ✔️ non-conductive tools, underground 3D imaging, ground-penetrating radar, non-conductive backhoe buckets
NIOSH is an acronym for which of the following? - ✔️ ✔️ The National Institute for Occupational Health and Safety
Non-ionizing radiation can cause: - ✔️ ✔️ skin cancer, eye damage, burns
Of all the struck-by incidents, being ____ results in the most severe and disabling injuries and accounts for the highest number of fatalities. - ✔️ ✔️ struck by equipment
On-line resources available to you include which of the following: - ✔️ ✔️ OSHA eTools, Publications, Quick Cards, and Safety and Health Topic Page
One of the main responsibilities employers have, as required by OSHA standards is to: - ✔️ ✔️ Provide training
One of the most common examples of misused electrically powered tools is _____. - ✔️ ✔️ attaching ungrounded, two pronged adapters into three pronged (grounded) cords and tools, using modified cords or tools with worn insulation or exposed wires
One who is capable of identifying existing and predictable hazards in the surrounding or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has the authorization to take prompt corrective measures to eliminate them describes a: - ✔️ ✔️ competent person
Order of preventing unsafe conditions: - ✔️ ✔️ recognize, evaluate, eliminate or control, re-evaluate
OSHA construction standard requires flexible cords to be rated for ______. - ✔️ ✔️ hard or extra-hard usage
OSHA requires all power cords to be protected from mechanical damage and environmental deterioration, which includes protection from _____: - ✔️ ✔️ all vehicles and equipment traffic, sharp materials, edges, doorways
OSHA requires employers to maintain certain records on and report work-related injuries and illnesses. Which of the following is used for this purpose? - ✔️ ✔️ Injury and
Proper rigging is critical for a safe hoisting activity. Who should inspect loads for sharp edges which will require padding to prevent cutting of slings? - ✔️ ✔️ The qualified rigger
Protect yourself when working in excavations by _____. - ✔️ ✔️ not working in an unprotected trench that is 5 feet or deeper, only entering a trench or excavation by using a ladder, stairway, or properly designed ramp, never working outside of the confines of the protection system
Rated loaded capacity refers to the total weight the ladder can sustain - ✔️ ✔️ true
Required head protection is labeled with: - ✔️ ✔️ manufacturer name, ANSI designation and class, date stamped
Research has shown that ___ workers are the most at risk to caught in running equipment or machinery hazards in the construction industry. - ✔️ ✔️ young and inexperienced
Routers, planers, laminate trimmer sheers, and jig saws, may be equipped with positive "on-off" control. - ✔️ ✔️ True
Routes of exposure include: - ✔️ ✔️ inhalation, ingestion, skin absorption
Rungs of a straight ladder don't need to be skid resistant. - ✔️ ✔️ False
Safety leadership also includes: - ✔️ ✔️ providing appropriate feedback such as coaching, ASKING for feedback from employees and coworkers, providing timely praise and recognition when appropriate, setting reasonable expectations for safe performance
Safety Shoes should have: - ✔️ ✔️ have a sturdy impact-resistant toe, metal insoles to protect against puncture wounds, a label that notes it meets ANSI specifications
Safety shoes that minimize slips and skids include the following except: - ✔️ ✔️ wooden soles
Scaffold access includes which of the following? - ✔️ ✔️ Ladder, stair tower, ramps, and walkways
Scaffold failures are often the cause of which of the following? - ✔️ ✔️ unsafe erection and excess weight, lack of supervision/inspection, incomplete (no handrails/mid-rails/toe boards), use of incompatible parts
Scaffold user training must include which of the following: - ✔️ ✔️ the hazards of type of scaffold being used and maximum intended load and capacity
Shoes worn to protect against electric current are: - ✔️ ✔️ often made with rubber or cork soles, have no metal parts, have insulated steel toes
Snap-hooks must be a locking-type and ______. - ✔️ ✔️ designed to prevent opening and slipping off the connector
Some examples of the most common causes of electrocution include: - ✔️ ✔️ contact with underground and above group energized power lines, failure to properly lock out and tag out energized power sources, failure to use a ground fault circuit interrupter (GFCI) in wet conditions, failure to maintain a safe distance from an energized power sources
Stairs should be installed between 30 degrees and ___ degrees. - ✔️ ✔️ 50
Stairs, ladders, or ramps are required at an elevation break of _____ or more. - ✔️ ✔️ 19
Straight ladders must support ___ times the maximum intended load. - ✔️ ✔️ 4
Strains, sprains, tendonitis, and carpal tunnel syndrome are examples of: - ✔️ ✔️ ergonomic injuries
Struck-by injuries are produced by forcible contact or impact between the injured person and: - ✔️ ✔️ an object or piece of equipment
Structural steel, poles, pipe, bar stock, and other cylindrical materials, unless racked, shall be stacked and blocked so as to prevent spreading or tilting. Pipe, unless racked, shall not be stacked higher than: - ✔️ ✔️ 5 feet
Studies have shown that complacency, a hazardous behavior, is in part caused by which of the following? - ✔️ ✔️ repetition of work, unsafe acts and conditions going uncorrected, management not evaluating and enforcing safe work procedures
Synthetic slings should be inspected by a competent person for abnormal wear, powdered fiber between strands, broken or cut fibers and much more. What should also be permanently affixed to the sling? - ✔️ ✔️ ID tag stating size, grade, rated capacity and manufacturer
The ______ is most often the best source of information regarding chemical protective gloves and other PPE. - ✔️ ✔️ Manufacturer/supplier
The "A" in "BESAFE" safe stands for Arc Flash, which ____? - ✔️ ✔️ is a sudden release of electrical energy, can reach temps of 35,000 degrees Fahrenheit, gives off
The hazard communication standard includes: - ✔️ ✔️ training, labels and related warnings, Safety Data Sheets (SDSs)
The key difference between a caught-by event and a struck-by event is whether the _____ along caused the injury. - ✔️ ✔️ impact of the object
The majority of fatal falls were the result of which acitivity? - ✔️ ✔️ falls from roofs
The majority of the incidents involving contact with running equipment and machinery are due to: - ✔️ ✔️ unguarded equipment and inadequately guarded equipment
The maximum length of a double section ladder is: - ✔️ ✔️ 48 feet
The minimum safe distance for equipment to be operated in proximity of energized power lines that contain even the lowest voltage (less than 50,000 volts) is: - ✔️ ✔️ 10 feet
The most common form of crystalline silica is: - ✔️ ✔️ quartz
The most frequently cited serious OSHA violations involving steel erection are for: - ✔️ ✔️ lack of fall hazard training, failure to meet OSHA'a fall protection general standards, failure to provide fall protection for connectors
The OSHA standards for Construction and General Industry are found in: - ✔️ ✔️ Parts 1926 and 1910
The primary causes of incidents and injuries are: - ✔️ ✔️ unsafe acts and unsafe conditions
The purpose of Lockout/Tag out checklist is to ____. - ✔️ ✔️ identify backup energy sources such as generators and batteries, identify all shut-offs for each energy source found, help identify all sources of hazardous energy for the equipment or circuits in question
The rate of work-related deaths among ironworkers is ___ times higher than construction average. - ✔️ ✔️ 10
The right of workers to be safe and healthy while on the job, without fear of punishment is spelled out in: - ✔️ ✔️ Section 11(c) of the OSH act
The standard ladder configuration is called "single-cleat". - ✔️ ✔️ True
The sudden release of electrical energy through the air when a high-voltage gap exits and there is a breakdown between conductors is referred to as _____. - ✔️ ✔️ arc flash
The term electrocution means - ✔️ ✔️ death caused by exposure to electricity
The third leading cause of falls in construction ( more than 100 deaths per year) is related to the use of ____? - ✔️ ✔️ ladders
The top section of an extension on a straight ladder should: - ✔️ ✔️ not be used by itself
The typical foot injury is caused by objects falling fewer than 4 feet and the median weight was about 65 poinds - ✔️ ✔️ true
To avoid being caught in a/n ______, do not work in an unprotected trench that is _____ deep or more. - ✔️ ✔️ cave-in, 5 feet
To change we need: - ✔️ ✔️ positive role models, coaches and mentors
To lift loads safety, you should bend your body at the: - ✔️ ✔️ knees
To prevent a load from slipping, all loads raised by cranes and other hoisting devices must _____. - ✔️ ✔️ be rigged properly with appropriately rated equipment
To prevent being struck by moving equipment you should _____. - ✔️ ✔️ stay away from moving equipment when it's operating, remain alert to the location of all operating equipment whether in use or not, stay clear of lifted loads, and never work under a suspended load, beware of unbalanced loads
To prevent being struck by operating euqipment, you should never _____. - ✔️ ✔️ stand next to or within the swing radius of operating equipment, park or place other equipment within 20 feet of operating equipment, let your safety depend on avoiding operator error or equipment malfunction
To prevent equipment from becoming a hazard when not in use, you should always _____. - ✔️ ✔️ use parking or emergency brakes that can be set to prevent movement, use wheels chocks for equipment on a grade or slope, turn wheels against the grade if on a slope
To protect yourself from hazardous moving parts of power tools and equipment, always use a/n _____ when using the equipment. - ✔️ ✔️ safety guard
To safely transport cargo, you should use _____ to prevent the load from shifting, slipping, rolling or falling. - ✔️ ✔️ straps, chains, webbing or wire rope
Unsafe electrical equipment can be identified by which of the following? - ✔️ ✔️ exposed electrical conductors, wires with bad insulation, ungrounded electrical systems and tools
Using a utility locate service to identify underground utilities is an exact science because: - ✔️ ✔️ locating underground utilities is not an exact science
We have learned that overhead power lines carry extremely high voltage. In addition which of the following statements is true about overhead power lines? - ✔️ ✔️ physical contact does not need to be made to cause electrocution, burns and falls from elevations are also hazards, cranes are not the only equipment that are at risk.
We showed a photo in which a car was crushed by heavy equipment. To prevent this, always make it easy to be seen by ____. - ✔️ ✔️ establishing a direct line-of-sight eye contact with operators
Wear a/n ________, if required, to avoid being thrown from a vehicle and then crushed by the vehicle as it tips over. - ✔️ ✔️ seat belt
Welding shields have Shade/Filters to protect against light rays. Of the following which is true regarding shades/filters? - ✔️ ✔️ Range between 1 and 14; higher the number, greater the protection
What are four different types of energy which may be hazardous to workers? (physical hazards) - ✔️ ✔️ noise, vibration, radiation, temperature extremes
What are some types of PPE that employers must pay for? - ✔️ ✔️ hard hats, hearing protection, fall protection harnesses
What are the elements that must be included on an SDS? - ✔️ ✔️ physical and chemical characteristics, health effects, exposure limits and the origin of the SDS
What are the steps for preventing unsafe conditions? - ✔️ ✔️ recognize the conditions, evaluate the conditions and related hazards, eliminate and/or control the hazards, re- evaluate as the situation changes
What are the three basic ways to protect yourself from all types of ionizing radiation? - ✔️ ✔️ reduce the time of exposure, increase the distance from the exposure, use shielding
What are two US government agencies that are good resources for safety and health information? - ✔️ ✔️ OSHA and NIOSH
What can be done to prevent caught between accidents involving rolling equipment? - ✔️ ✔️ shut down equipment before doing repairs or inspections, check the wheels on any equipment that can roll, never work under equipment supported only by a hydraulic or mechanical jack
What can greatly increase the probability of a struck-by vehicle incident, requiring spotters or parabolic mirror to help prevent a hazard from becoming an accident? - ✔️ ✔️ blind corners and sever grade changes
What do we know about OSHA fat/cat reports? - ✔️ ✔️ They contain preliminary descriptions of incidents
What does OSHA require employers to post for 3 days? - ✔️ ✔️ OSHA citations and abatement verification notices
What is my employer require to do to protect workers from electrocutions - ✔️ ✔️ ensure overhead power line safety, isolate electrical parts, supply ground-fault circuit interrupters (GFCI), provide training
What is the definition of a near miss? - ✔️ ✔️ something narrowly avoided; a lucky escape
What major hazard includes incidents where a person or part of a person was injured by being squeezed, crushed, pinched or compressed between two or more objects, or between parts of an object? - ✔️ ✔️ Caught in or between hazards
What safety equipment can protect operators from being thrown from their equipment and crushed during a tip over? - ✔️ ✔️ installation and use of a proper seat belt, ensure that the equipment is equipped with a rollover protective structure
What section of the OSH Act does the Whistleblower Program reference? - ✔️ ✔️ Section 11(c)
What should not be used to support a scaffold because they could collapse, sending the structure to the ground? - ✔️ ✔️ cinder blocks
What type of injuries can occur in a struck-by incident? - ✔️ ✔️ serious bruises and contusions, punctures and impalement, broken bones and head injuries, death
What type of OSHA inspection is conducted when immediate death or serious injury is likely - ✔️ ✔️ imminent danger
What's OSHA's mission? - ✔️ ✔️ To prevent injuries, protect the health of America's workers, to save lives
