


Study with the several resources on Docsity
Earn points by helping other students or get them with a premium plan
Prepare for your exams
Study with the several resources on Docsity
Earn points to download
Earn points by helping other students or get them with a premium plan
This study guide provides essential information for pool operators, covering topics such as ideal bromine and chlorine levels, troubleshooting common issues, and maintaining water quality. It includes questions and answers related to ph balance, chemical handling, filtration systems, and safety measures. Useful for individuals preparing for pool operator certification or seeking to enhance their knowledge of pool maintenance and safety protocols. It also covers regulations and best practices for pool operation.
Typology: Exams
1 / 4
This page cannot be seen from the preview
Don't miss anything!



Ideal bromine level in a pool and spa is: Correct Ans - 3ppm to 6ppm Ideal chorine level for a pool is: Correct Ans - 1ppm to 5ppm Maximum level of chlorine in a pool is: Correct Ans - 5ppm If you see bubbles coming up from a return, the possible cause could be Correct Ans - a bad seal on the hair/lint strainer - it is not properly closed, or air is in the filter, or water level is too low The hypochlorinator doesn't work. What could be a possible cause for this? a) no chlorine in the vat b) the injection fitting is clogged c) the tube assembly needs to be changed d) all of the above Correct Ans - d) all of the above You go to the pool in the morning and notice the chlorine is at zero. You hand- feed chlorine, how long to do you have to wait to allow people to go into the pool. a) no time b) 15 minutes c) 30 minutes d) One day Correct Ans - c) 30 minutes When doing the pH test and the sample turns yellow, what does it mean? Correct Ans - pH is too low When doing the pH test and the sample turns purple, what does it mean? Correct Ans - pH is too high What do you do if a patron complains of a chlorine smell and their eyes are stinging? Correct Ans - Raise the chlorine to Breakpoint Level. If the telephone at the pool doesn't work Correct Ans - close the pool What should you use when handling chemicals? Correct Ans - Personal Protective Equipment - Gloves, Goggles, Apron
What happens if the alkalinity level is too low? Correct Ans - pH is difficult to maintain, the water will cause damage to the pool walls ADD CHEMICALS TO WATER; DO NOT ADD WATER TO CHEMICALS Correct Ans - ... How do you lower the Calcium Hardness Level? Correct Ans - Drain water out and add fresh water. Dilute the water. What should you have if the water is deeper than 5 ft? Correct Ans - Put up a safety line If the chlorinator is working and you have chlorine in the vat, what is a possible reason for the chlorine reading being 0? Correct Ans - The test could be bleached (chlorine level is too high) What kind of filter media filters the smallest particles? Correct Ans - Diatomaceous Earth (DE) To be a pool operator you must Correct Ans - complete pool operators training course The strongest suction in the pool is Correct Ans - the main drain Electrical system at pool must have Correct Ans - GFI's The skimmer Correct Ans - weir prevents floating material from re- entering the pool. Filtration is the Correct Ans - physical process of water moving through the system. The time it takes for all the water to go through the filter system is the Correct Ans - turnover rate In most jurisdictions the turnover rate is Correct Ans - 6 hours Algae forms because of Correct Ans - poor circulation and/or low chlorine levels
As the dirt in the filter accumulates the flow of water going through the filter Correct Ans - decreases while filter pressure increases removing dirt/particles from filter Correct Ans - backwashing High speed sand filters are able to filter how much water per minute per square foot? Correct Ans - 15- The flow of water through the filter is Correct Ans - gallons per minute Breakeven point level of chlorine at a pool you must have Correct Ans - 10 times the level of chloramines If a patron smells chloramines (bad chlorine) you should Correct Ans - shock the pool Maximum temperature in a spa is Correct Ans - 104 degrees fahrenheit Maximum bromine level in a spa is Correct Ans - 6ppm pH levels should be Correct Ans - 7.2-7.8 (like a pool) If you are using gas chlorine at a swimming pool the filter room must be Correct Ans - WELL VENTILATED.