Download PrepIQ Wisconsin WI INDUSTRIAL ELECTRICAL APPRENTICE Ultimate Exam and more Exams Nursing in PDF only on Docsity!
PrepIQ Wisconsin WI INDUSTRIAL ELECTRICAL
APPRENTICE Ultimate Exam
SECTION 1: WISCONSIN LICENSING & REGULATIONS (Questions 1–40)
Question 1. Which Wisconsin agency is responsible for licensing industrial journeyman electricians? A) Wisconsin Department of Workforce Development (DWD) B) Wisconsin Department of Safety and Professional Services (DSPS) C) Wisconsin Public Service Commission (PSC) D) Wisconsin Department of Commerce Answer: B Explanation: The Wisconsin Department of Safety and Professional Services (DSPS) administers the licensing, certification, and registration of electricians, including industrial journeyman electricians. The DSPS oversees compliance with Wisconsin Administrative Code Chapter SPS 305, which governs electrical licensing requirements.
Question 2. According to Wis. Admin. Code § SPS 305.443, a person may obtain a license as a licensed industrial journeyman electrician by what means?
A) Completing an associate degree in electrical engineering only B) Taking and passing the industrial journeyman electrician licensure examination OR completing an industrial electrical apprenticeship C) Working as a registered electrician for 10 years without examination D) Passing the residential master electrician examination only Answer: B Explanation: Section SPS 305.443(1) provides two pathways: a person may obtain a license by either (a) taking and passing the industrial journeyman electrician licensure examination, or (b) completing an industrial electrical apprenticeship.
Question 3. Under Wisconsin law, what does the acronym DSPS stand for? A) Department of Safety and Public Services B) Department of Safety and Professional Standards C) Department of Safety and Professional Services D) Division of Safety and Public Supervision Answer: C Explanation: DSPS is the Wisconsin Department of Safety and Professional Services, the state agency responsible for licensing and regulating trades professionals including electricians.
D) The supervisor must be a licensed professional engineer Answer: B Explanation: A registered electrician must perform electrical wiring activities under the direct supervision of a licensed Master Electrician or licensed Journeyman Electrician, meaning the supervisor is present and responsible for the work being performed.
Question 6. Which of the following activities may a registered electrician perform without direct supervision by a master or journeyman electrician? A) Installing new service entrance equipment B) Wiring a new industrial control panel C) None; registered electricians must always work under direct supervision D) Troubleshooting existing circuits Answer: C Explanation: The Wisconsin DSPS明确规定注册电工必须始终在持有执 照的师傅电工或熟练电工的直接监督下进行电气布线活动。没有例外允 许注册电工在没有监督的情况下工作 。
Question 7. According to Wis. Admin. Code § SPS 305.443(3)(b), what is the maximum number of experience hours that can be credited toward the 5,000-hour requirement through formal education? A) 1,000 hours (1 year) B) 2,000 hours (2 years) C) 3,000 hours (3 years) D) 4,000 hours (4 years) Answer: B Explanation: For each semester spent full-time in an electrical engineering program or accredited college/university/technical school electrical program, 500 hours may be credited, with a maximum of 2, hours and 2 years of experience through education being credited.
Question 8. After passing the industrial journeyman electrician examination, a person must submit which of the following to obtain the license? A) Only the examination passing notice B) An application and the license fee C) A letter of recommendation from an employer D) Proof of residency for 5 years Answer: B
A) Wisconsin Administrative Code SPS 305 B) Wisconsin Statute § 101. C) National Electrical Code Article 90 D) OSHA 29 CFR 1910 Answer: B Explanation: Wisconsin Statute § 101.862 explicitly states "no person may install, repair or maintain electrical wiring unless the person is licensed as an electrician by the Department or unless the person is enrolled as a registered Electrician by the Department".
Question 11. According to Wisconsin regulations, a Registered Electrician may perform electrical wiring under the direct supervision of a licensed Industrial Journeyman Electrician under what condition? A) Only in residential settings B) Only for new construction projects C) Provided the wiring is within the facilities or properties of the business establishment where the Industrial Journeyman Electrician is employed D) Only for emergency repairs Answer: C Explanation: Registered Electricians may perform electrical wiring under the direct supervision of a person who holds a license as a licensed Industrial
Journeyman Electrician provided the wiring is within the facilities or properties of the business establishment where the Industrial Journeyman Electrician is employed.
Question 12. An industrial electrical apprentice is typically required to complete how many years of training? A) 1-2 years B) 2-5 years C) 6-8 years D) 10 years Answer: B Explanation: Apprenticeship programs in Wisconsin trades typically vary from two to five years, depending on the specific trade and program requirements.
Question 13. What is the first step for an individual who wants to become an industrial electrical apprentice in Wisconsin? A) Enroll directly in a technical college program B) Get hired by an employer in the electrical field
Question 15. What is the Wisconsin equivalent of "Industrial Journeyman Electrician" in the SPS 305 licensing structure? A) Section SPS 305. B) Section SPS 305. C) Section SPS 305. D) Section SPS 305. Answer: B Explanation: Wisconsin Administrative Code Section SPS 305. specifically addresses "Industrial journeyman electricians," while SPS 305. addresses general journeyman electricians and SPS 305.447 addresses residential journeyman electricians.
Question 16. According to Wisconsin law, an electrical contractor is responsible for all of the following EXCEPT: A) Utilizing appropriately licensed individuals to perform electrical wiring B) Personally performing all electrical work without using employees C) Ensuring a permit is issued before commencing installation D) Including their license number on all construction bids and contracts Answer: B
Explanation: Licensed Electrical Contractors must utilize appropriately licensed individuals, ensure permits are obtained before work begins, and include license numbers on bids and contracts. They are NOT required to perform all work personally.
Question 17. Which section of the Wisconsin Administrative Code applies to one- and two-family dwellings and manufactured dwellings? A) SPS 305 B) SPS 316 C) SPS 320- 325 D) SPS 301- 319 Answer: C Explanation: Wisconsin Administrative Code chapters SPS 320-325 apply to one- and two-family dwellings and manufactured dwellings, also known as the Uniform Dwelling Code.
Question 18. Before an electrical contractor may commence installation of electrical wiring for a project requiring a uniform building permit, what must be obtained? A) The owner's written authorization
Question 20. According to Wisconsin Administrative Code, what is the license category for a person currently enrolled as an electrician by the Department? A) Licensed Journeyman Electrician B) Licensed Master Electrician C) Registered Electrician D) Electrical Contractor Answer: C Explanation: Per Wis. Stat. § 101.862, a person may be "enrolled as a registered Electrician by the Department." This is the entry-level registration status for individuals working under supervision.
Question 21. The Wisconsin Department of Safety and Professional Services has transitioned trades credential applications and renewals to which online platform? A) DSPS Direct B) LicensE C) Wisconsin Licensing Portal D) e-Service
Answer: B Explanation: The Wisconsin DSPS has transitioned trades credential applications and renewals to "LicensE," described as an online, self-guided licensing platform accessible at license.wi.gov.
Question 22. According to Wisconsin Administrative Code, which license category is responsible for supervising registered electricians who perform wiring in industrial facilities? A) Residential Master Electrician B) Residential Journeyman Electrician C) Industrial Journeyman Electrician D) Electrical Contractor only Answer: C Explanation: Registered Electricians may perform electrical wiring under the direct supervision of a person who holds a license as a licensed Industrial Journeyman Electrician provided the wiring is within the facilities or properties of the business establishment where the Industrial Journeyman Electrician is employed.
Explanation: Subchapter IV includes master electricians, journeyman electricians, industrial journeyman electricians, residential master electricians, residential journeyman electricians, registered master electricians, beginning electricians, and electrical apprentices.
Question 25. According to Wisconsin law, who may issue the uniform building permit for one- and two-family dwellings? A) Only the DSPS B) Only the municipality where the dwelling is located C) The municipality where the dwelling is located or a UDC inspection agency where the municipality does not administer the Uniform Dwelling Code D) Only the electrical contractor Answer: C Explanation: The uniform building permit is issued either by the municipality in which the dwelling is located or by a UDC inspection agency where the municipality does not administer the Uniform Dwelling Code.
Question 26. An electrical contractor's license number must appear on which documents? A) Only on the business letterhead
B) On all construction bids and contracts C) On employee pay stubs only D) On vehicle registration only Answer: B Explanation: A person or entity that holds an Electrical Contractor license shall include his or her license number on all construction bids and contracts.
Question 27. What is the primary purpose of Wisconsin's electrical licensing and registration requirements? A) To increase state revenue through fees B) To ensure public safety through qualified electrical workers C) To limit competition in the electrical trade D) To standardize electrical equipment manufacturers Answer: B Explanation: The licensing and registration requirements are designed to ensure that only qualified individuals perform electrical work, protecting public safety and property from hazards associated with improper electrical installations.
Answer: B Explanation: The apprenticeship program must have been recognized by both the Wisconsin Department of Workforce Development and the federal Department of Labor.
Question 30. For the purpose of industrial journeyman electrician qualification, each full semester of full-time electrical education is equivalent to how many hours of experience? A) 250 hours B) 500 hours C) 750 hours D) 1,000 hours Answer: B Explanation: Section SPS 305.443(3)(b) states: "each semester spent full- time in a school of electrical engineering or other accredited college, university, technical or vocational school in an electrical-related program shall be considered equivalent to 500 hours of experience".
SECTION 2: INDUSTRIAL ELECTRICAL SAFETY (Questions 41–80)
Question 31. What is the most critical personal protective equipment (PPE) when working on energized industrial electrical circuits? A) Safety glasses B) Insulated gloves C) Hard hat D) Steel-toed boots Answer: B Explanation: Insulated gloves protect against electrical shock when working on energized circuits. They are specifically rated for electrical work and must be tested regularly.
Question 32. What is the primary hazard associated with an arc flash in industrial electrical equipment? A) Chemical burns from arc products B) Severe burns and blast injuries C) Electromagnetic interference with electronics D) Hearing damage only Answer: B
