Revit Architectural Modeling Techniques, Exams of Architecture

Download Revit Architectural Modeling Techniques and more Exams Architecture in PDF only on Docsity! Revit Certification Prep - Architectural Designer 2024-2025. Questions & Correct Answers. Graded A+ An architectural designer creates an area plan. Some of the automatically generated area boundary lines are incorrect. What should the designer do to get the correct are boundaries? a. Use the Area Boundary tool to create the correct area boundaries. b. Place areas in the correct locations and then edit the area sketches. c. Activate the Room Separator tool and create the correct boundaries. d. Create a new area scheme and then re-create the area plan. - ANSa. Use the Area Boundary tool to create the correct are boundaries. An architectural designer encounters the situation shown in the exhibit (a brick wall with a pointed roof above, they are not connected, hence having a blank triangular opening) a. Align b. Trim/Extend to Corner c. Attach Top/Base d. Displace Elements - ANSc. Attach Top/Base An architectural designer has a linked architectural model and wants to place rooms inside of the link. Revit does not recognize any of the elements as room bounding though. What should be done? a. Enable Room Bounding in the Properties palette for each wall in the link. b. Open the link and change the Room Area Computation setting to at wall finish. c. Select the linked architectural model, click Edit Type, and enable Room Bounding. d. Use the Room Separator tool with a the Pick Lines option to place room separation lines. - ANSc. Select the linked architectural model, click Edit Type, and enable Room Bounding. An architectural designer has an MEP model where air terminals are placed. The designer wants to use the air terminal locations to place generic air terminals in the architectural model. What should the designer do? a. Use Copy/Monitor and specify type mapping for the air terminals b. Batch copy using Copy/Monitor and then change all the air terminal types c. Place air terminals individually and then use Monitor to track the locations d. Copy the MEP air terminals to the clipboard and paste in the architectural model. - ANSa. Use Copy/ Monitor and specify type mapping for the air terminals An architectural designer has created a detail by placing detail components in a section view. The designer wants to use the detail components in several other section views in the same project. Which tool should be used? a. Copy b. Create Group c. Insert 2D Elements from File d. Insert Views from File - ANSb. Create Group An architectural designer has created a drafting view with a detail. The designer wants to use the detail in another project. Which tool should be used? a. Insert 2D Elements from File b. Insert Views from File c. Link Revit d. Detail Group - ANSb. Insert Views from File An architectural designer has created a model group and wants to place Boundary An architectural designer is creating a room tag family. The designer wants the tag to reference the room Name and Number parameters. How can this be accomplished? a. Add text in the family that includes the Name and Number parameters b. Use the Symbol tool and choose a generic annotation the includes the Name and Number parameters c. Place a label in the family that includes the Name and Number parameters d. Create a link in the family and select the Name and Number parameters - ANSc. Place a label in the family that includes the Name and Number paramters An architectural designer is creating a view filter. When creating a filter rule, the desired parameter does not appear in the list. What should the designer check? a. The categories that are included in the filter. b. The AND/OR setting for the filter rule set. c. The operator for the filter rule. d. The view type of the view the filter is added to. - ANSa. The categories that are included in the filter. An architectural designer is creating a wall schedule and wants to include walls from the host model and a linked model. How should this be accomplished? a. In the Schedule Properties dialog, on the Formatting tab, select Use Project Settings. b. In the Schedule Properties dialog, on the Fields tab, select Include Elements in Links. c. In the Schedule Properties dialog, on the Filter tab, filter by the host model and linked model. d. In the Schedule Properties dialog, on the Sorting/Grouping tab, select Itemize Every Instance. - ANSb. In the Schedule Properties dialog, on the Fields tab, select Include Elements in Links An architectural designer is creating a wall schedule and wants to include walls from the host model and a linked model. How should this be accomplished? a. In the Schedule Properties dialog, on the Sorting/Grouping tab, select Itemize Every Instance. b. In the Schedule Properties dialog, on the Fields tab, select Include Elements in Links. c. In the Schedule Properties dialog, on the Formatting tab, select Use Project Settings. d. In the Schedule Properties dialog, on the Filter tab, filter by the host model and linked model. - ANSb. In the Schedule Properties dialog, on the Fields tab, select Include Elements in Links. An architectural designer is creating a wall schedule. The designer only wants to show walls of the Brick on Metal Stud type. How should this be accomplished? a. Sort the schedule by wall Type and deselect Itemize every instance. b. Use conditional formatting based on wall Type equals Brick on Metal stud c. Filter the schedule by wall Type equals Brick on Metal Stud d. Set the Appearance of the schedule to show the Brick on Metal Stud type - ANSc. Filter the schedule by wall Type equals Brick on Metal Stud An architectural designer is creating parameters for a door family. Drag and drop each Type of Parameter to the correct corresponding description. a. Length b. Text c. Yes/No d. Material 1. A parameter to control the hardware visibility 2. A field to enter custom notes 3. The material of the door trim 4. The height of the door - ANSa. Length = 4. The height of the door b. Text = 2. A field to enter custom notes c. Yes/No = 1. A parameter to control the hardware visibility d. Material = 3. The material of the door trim An architectural designer is creating schedules in a project. Drag and drop each schedule tool to the correct corresponding schedule description. a. Sheet list b. Material takeoff c. Schedule/quantities d. Note Block 1. A schedule for all the wall types in the project 2. A schedule for all the materials in the walls 3. A schedule for all the sheets in the project 4. A schedule for all the symbols placed - ANSa. Sheet list = 3. A schedule for all the sheets in the project b. Material takeoff = 2. A schedule for all the materials in the walls c. Schedule/quantities = 1. A schedule for all wall types in the project d. Note Block = 4. A schedule for all the symbols placed An architectural designer is reviewing the instance properties of a room and notices that the Volume is set to Not Computed. How can this parameter be calculated? a. Change the Upper Limit to SECOND FLOOR b. Change the Room Area Computation to At Wall Finish c. Change the Volume Computations to Areas and Volumes d. Change the Computations Height to Second Floor - ANSc. Change the Volume Computations to Areas and Volumes An architectural designer is working in a 3D view and Footer option to Totals only. b. Enable Grand totals in the Schedule Properties dialog. c. Set the Area parameter to Calculate totals. d. Add a calculated parameter for the Area. - ANSc. Set the Area parameter to Calculate totals An architectural designer is working on resolving warnings in a project. The designer has the element ID of an element associated with a warning. Which tool should be used to select the element? a. Selection Set b. Warnings c. IDs of Selection d. Select by ID - ANSd. Select by ID An architectural designer needs a thick green line to use for details. How should the line style be created? a. Adjust the line weight for green lines in the Line Weight dialog. b. Create a new line pattern in the Line Patterns dialog. c. Create a new detail line type in the Type Properties dialog. d. Create a new subcategory for the Lines category. - ANSd. Create a new subcategory for the Lines category. An architectural designer needs a thick green line to use for details. How should the line style be created? a. Adjust the line weight for green lines in the Line Weights dialog. b. Create a new subcategory for the Lines category. c. Create a new detail line type in the Type Properties dialog. d. Create a new line pattern in the Line Patterns dialog. - ANSb. Create a new subcategory for the Lines category. An architectural designer needs to add a curtain grid to a single curtain wall without affecting the curtain wall type. Which tool should be used? a. Curtain System b. Curtain Grid c. Curtain Wall d. Mullion - ANSb. Curtain Grid An architectural designer needs to add a curtain grid to a single curtain wall without affecting the curtain wall type. Which tool should be used? a. Curtain System b. Curtain Grid c. Curtain Wall d. Mullion - ANSb. Curtain Grid An architectural designer needs to adjust the slope of a roof by adjusting the elevation of a single point. Which slope tool should be used? a. Defines Slope b. Shape Editing c. Slope Arrow d. Edit Type - ANSb. Shape Editing An architectural designer needs to adjust the slope of a roof by adjusting the elevation of a single point. Which slope tool should be used? a. Edit Type b. Defines Slope c. Shape Editing d. Slope Arrow - ANSc. Shape Editing An architectural designer needs to control the number of horizontal grids for individual curtain walls in a project. How should this be accomplished? a. In the Type Properties, set the Horizontal Grid Layout to Fixed Number. b. For each curtain wall, set the Horizontal Grid Justification to Beginning in the Properties palette. c. Create the curtain walls using the Curtain System tool instead of the Wall tool. d. Set the Horizontal Mullions Layout parameter to Fixed Number in the Type Properties. - ANSa. In the Type Properties, set the Horizontal Grid Layout to Fixed Number. An architectural designer needs to create a detail using detail components. The detail should be independent of the building model. What type of view should be used? a. 3D View b. Callout View c. Section View d. Drafting View - ANSd. Drafting View An architectural designer needs to create a family that can be hosted to a wall or a ceiling. Which template should be used to create the family? a. Generic Model wall based.rft b. Generic Model.rft c. Generic Model face based.rft d. Generic Model ceiling based.rft - ANSc. Generic Model face based.rft An architectural designer needs to create a new brick material based on an existing brick material. The same material assets need to be used. Which process should be used? a. Select Create New Material and then add the assets from the existing brick material. b. Right- click the material and select Duplicate Using Shared Assets. c. Select Open Existing Library and then select the existing brick material. d. Right-click the material and select Duplicate Material and Assets. - ANSb. Right-click the material and select Duplicate Using Shared Assets. An architectural designer needs to create a repeating detail type for a brick. What should be created first for the brick? a. 3D Brick Family b. Generic Annotation Type c. Detail Component Type d. Generic Model Family - ANSc. Detail Component Type An architectural designer needs to create a stair type without risers. Where is this setting controlled? a. Support Type Properties b. Run Type Properties c. Landing Type Properties d. Stair Type Properties - ANSb. Run Type Properties An architectural designer needs to Scale. d. Override is selected for the View Scale in the Visibility/Graphic Overrides dialog. - ANSa. Include is not selected for the View Scale parameter in the view template. An architectural designer wants to create a new central model from an existing workshared project. When opening the project, which option should be selected? a. Audit b. Relinquish All Mine c. Detach from Central d. Collaborate in Cloud - ANSc. Detach from Central An architectural designer wants to create a tag with two label and two types. The designer wants to have one label appear for one type but not the other. What parameter type should be created to accomplish this? a. Yes/No b. Text c. Visibility d. Integer - ANSa. Yes/No An architectural designer wants to create a tag with two labels and two types. The designer wants to have one label appear for one type but not the other. What parameter type should be created to accomplish this? a. Integer b. Text c. Visibility d. Yes/No - ANSd. Yes/No An architectural designer wants to hide all the roof elements in a 3D view without affecting the view properties. Which Temporary Hide/Isolate tool should be used? a. Hide Element b. Hide Category c. Isolate Element d. Isolate Category - ANSb. Hide Category Based on the drawing area (orange outline with "worksets" in the top left, interior purple shading across the entire building while the exterior is highlighted in yellow) , what view state is currently active? a. Reveal Hidden Elements b. Worksharing Display Mode c. Temporary Hide/Isolate d. Gray Inactive Worksets - ANSb. Worksharing Display Mode If a linked Revit model is accidentally moved, how can the reposition options be accessed? a. Press V, G and open the Revit Links tab. b. Select the link and right-click c. Switch to the Insert tab. d. Open the Manage Links dialog - ANSb. Select the link and right-click. In which dialog can the start and end posts for a railing type be controlled? a. Material Browser b. Edit Baluster Placement c. Type Properties d. Edit Rails (Non-Continuous) - ANSb. Edit Baluster Placement In which dialog is the Layer naming convention for exported CAD files controlled? a. Visibility/Graphic Overrides b. Object Styles c. Modify DWG/DXF Export Setup d. Export Setup - ANSc. Modify DWG/DXF Export Setup In which options tab can the save reminder intervals be adjusted? a. File Location b. General c. Hardware d. User Interface - ANSb. General In which options tab can the save reminder intervals be adjusted? a. Hardware b. User Interface c. File Locations d. General - ANSd. General The Phase of a view is set to New Construction and the Phase Filter is set to Show Complete. What will control the graphic display of Demolished elements? a. Demolished elements will not be visible in the view. b. Object Styles for the New Construction phase. c. The Demolished settings on the Graphic Overrides tab. d. The setting for the elements' categories in the Visibility/Graphic Overrides dialog. - ANSa. Demolished elements will not be visible in the view. The Phase of a view is set to New Construction and the Phase Filter is set to Show Previous + New. What will control the graphic display of Existing Elements? a. Object Styles for the New Construction phase. b. Existing elements will not be visible in the view. c. The setting for the elements' categories in the Visibility/Graphic Overrides dialog. d. The Existing settings on the Graphic Overrides tab. - ANSd. The Existing settings on the Graphic Overrides tab. The Phase of a view is set to New Construction. The Phased Created parameter for an element is set to Existing and the Phase Demolished parameter is set to New Construction. What is the phase status of the element in the View? a. New b. Demolished c. Temporary d. Existing - ANSb. Demolished What are the two View options when placing a legend component? (select two) a. 3D b. Floor Plan c. Section d. Callout e. Elevation - ANSb. Floor Plan & c. Section What controls the area plan types that are available? a. Area Boundaries b. Area Schemes c. Color Schemes d. Floor Plan Types - ANSb. Area Schemes What controls the position of the sun? a. Project Coordinates b. True North c. Shared Coordinates d. Project Location - ANSd. Project Location What controls the visibility and graphic display of an element based on its phase What type of fill pattern can be used for a material's Foreground Surface Pattern? a. None b. Only Drafting c. Drafting or Model d. Only Model - ANSc. Drafting or Model What type of fill pattern can be used for a material's Foreground Surface Pattern? a. Only Model b. Drafting or Model c. Only Drafting d. None - ANSb. Drafting or Model What type of parameter is required to associate to a form's Visible parameter? a. Common b. Yes/No c. Visibility d. Text - ANSb. Yes/No When importing a CSV file or points data from a civil engineering drawing, what option is used to create the topography? a. Place Point b. Specify Import Instance c. Set Point d. Specify Points File - ANSd. Specify Points File When importing a DWG, DXF, DGN data, what option is used to create the topography> a. Place Point b. Specify Import Instance c. Set Point d. Specify Points File - ANSb. Specify Import Instance Where is the leader arrowhead controlled for a text note? a. Additional Settings dialog b. Text Type Properties c. Text Instance Properties d. Arrowhead Type Properties - ANSb. Text Type Properties Where is the Revisions on Sheet dialog accessed from? a. Sheet instance properties b. Sheet Issues/Revisions dialog c. Edit Numbering Sequence dialog d. Titleblock instance properties - ANSa. Sheet instance properties Where is the save location of workshared local copies controlled? a. Worksets dialog b. Synchronize with Central dialog c. Options dialog > File Location d. Options dialog > User Interface - ANSc. Options dialog > File Location Which branch in the Project Browser cannot be organized with an organization scheme? a. Legends b. Schedules/Quantities c. Sheets d. Views - ANSa. Legends Which branch in the Project Browser cannot be organized with an organization scheme? a. Schedules/Quantities b. Legends c. Sheets d. Views - ANSb. Legends Which component will take on the layer materials of a basic wall when placed in the wall? a. Railings b. Wall Opening c. Curtain Walls d. Architectural Columbs - ANSd. Architectural Columns Which dialog is used to apply a material to an element? a. Associate Family Parameter b. Material Browser c. Fill Patterns d. Type Properties - ANSb. Material Browser Which dialog is used to apply a material to an element? a. Type Properties b. Fill Patterns c. Associate Family Parameter d. Material Browser - ANSd. Material Browser Which Duplicate View tool will duplicate a view and the view-specific elements? a. Duplicate with Detailing b. Duplicate c. Duplicate All d. Duplicate as a Dependent - ANSa. Duplicate with Detailing Which Duplicate View tool would you use to set up two "Scope Boxed" portions of the view in order to display a large drawing at a desired scale on specific sheet dimensions? a. Duplicate with Detailing b. Duplicate c. Duplicate All d. Duplicate as a Dependent - ANSd. Duplicate as a Dependent Which Duplicate View tool would you use to simply duplicate the architectural components? a. Duplicate with Detailing b. Duplicate c. Duplicate All d. Duplicate as a Dependent - ANSb. Duplicate Which item can control the crop region of a view? a. View Reference b. Section Box c. Plan Region d. Scope Box - ANSd. Scope Box Which opening tool should be used to create a single opening that will cut thought multiple floors, ceilings, and roofs? a. Wall Opening b. Shaft Opening c. Opening by Face d. Vertical Opening - ANSb. Shaft Opening Which opening tool should be used to create a single opening that will cut through multiple floors, ceilings, and roofs? a. Opening by Face b. Shaft Opening c. Vertical Opening d. Wall Opening - ANSb. Shaft Opening Which option will can for corrupted elements and attempt to fix them? a. Compact Central Model b. Audit c. Detach from Central d. Review Warnings - ANSb. Audit Which option will scan for corrupted elements and attempt to fix them? a. Compact Central Model b. Review Warnings c. Audit d. Detach from Central - ANSc. Audit Which tool can be used to connect the top of a wall to the underside of a sloped roof? a. Align b. Attach Top/Base c. Join Geometry d. Wall Opening - ANSb. Attach Top/Base Which tool can be used to connect the top of a wall to the underside of a sloped roof? a. Join Geometry b. Align c. Attach Top/Base d. Wall Opening - ANSc. Attach Top/Base Which tool is used to create a key schedule? a.