Smith Chart Question-Advanced Microwave Engineering-Quiz, Exercises of Microwave Engineering and Acoustics

This is quiz for Advanced Microwave Engineering course. it was taken by Kalyan Krishna at Anna University of Technology. It includes: Lossless, Line, Terminated, Load, Impedance, Smith, Chart, Reflection, Coefficient, Signal, Frequency

Typology: Exercises

2011/2012

Uploaded on 07/11/2012

dheerandra
dheerandra 🇮🇳

4.4

(43)

141 documents

1 / 1

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
Smith Chart Question
A 5.2 cm length of lossless 100 ohm line is terminated in a load impedance of 30 + j 50 ohms .
Using the Smith chart, find the following parameters of this line. (a) The SWR on the line. (b)
The reflection coefficient at the load. (b) The impedance and admittance at the input and at a
point 2.0 cm from the load. The signal frequency is 750 MHz and λ = . (c) The distance from
the load to the first voltage minimum. (d) The distance from the load to the first voltage
maximum.
Docsity.com

Partial preview of the text

Download Smith Chart Question-Advanced Microwave Engineering-Quiz and more Exercises Microwave Engineering and Acoustics in PDF only on Docsity!

Smith Chart Question

A 5.2 cm length of lossless 100 ohm line is terminated in a load impedance of 30 + j 50 ohms. Using the Smith chart, find the following parameters of this line. (a) The SWR on the line. (b) The reflection coefficient at the load. (b) The impedance and admittance at the input and at a point 2.0 cm from the load. The signal frequency is 750 MHz and λ =. (c) The distance from the load to the first voltage minimum. (d) The distance from the load to the first voltage maximum.

Docsity.com