



Study with the several resources on Docsity
Earn points by helping other students or get them with a premium plan
Prepare for your exams
Study with the several resources on Docsity
Earn points to download
Earn points by helping other students or get them with a premium plan
Study Guide - Dell Client Advanced 2022
Typology: Exams
1 / 6
This page cannot be seen from the preview
Don't miss anything!




The Edge Gateway 3000 series support the following power sources: - correct answer 3-pin DC - In Power over Ethernet (PoE 37V DC-57VDC) Select the statements that are true about Trusted Platform Module (TPM) - correct answer The Trusted Platform Module (TPM) is used to generate and store Keys. It can create and store digital certificates. It can also be used to enable the BitLocker hard drive encryption. The OEM identity (ID) Module is a Utility used to replace the Dell Logo on the System Hardware like the Bezel. - correct answer False When the side cover of Precision Tower 7920 is not assembled, the system will still power on. - correct answer False ePSA stands for - correct answer Enhanced Pre-boot System Assessment Which RAID is defined as Striped set without Parity? - correct answer RAID 0 In a scenario where the System Board is replaced, remove the Processor Heatsink Module (PHM) together with the processor. There is no need to seperate the PHM from the processor. - correct answer True What steps must be taken if there is a fan-related error message displayed at the Start up but the system boots to the OS? - correct answer Update BIOS and Drivers Swapping the DIMMS
The Dell Precision System board is shipped in Manufacturing mode and the User or Service Provider must select the manageability option upon first boot after replacement. - correct answer True We Import a Foreign configuration in a RAID Array, if: - correct answer The array containing the foreign configuration is in an Offline state. Which indicator shows whether power is present or power fault has occurred in Precision systems? - correct answer Both Where can the field Service Manual containing Critical Callout, Disassembly and Reassembly instructions be found? - correct answer PRM/ Educate Dell The touchscreen LCD assembly for Alienware 13R3 is a Hinge-Up Design (HUD) assembly and cannot be further disassembled once it is removed from the chassis - correct answer True iDRAC with Lifecycle Controller can be used for - correct answer .... In the latest Precision Rack, the iDRAC Enterprise license is available by default - correct answer False USB Service Key is used for Windows OS Installation and debranding (for OEM) in an Edge Gateway - correct answer True Select all the LED codes for Memory related issues in a Dell Edge Gateway - correct answer 2, 2, 2, On a Precision Workstation, if a Hard drive status indicator flashes green, amber and then turns off; this indicates the drive is rebuilding - correct answer False
NOTAC PSU indicator blinks green five times at a rate of 4 Hz and turns off to indicate PSU mismatch The BIOS can be accessed in a Dell System using which of the following keys - correct answer F Which keyboard key is used in an Edge Gateway 3000 seris to start ePSA? - correct answer F Onsite services for Rugged Notebooks are limited to CRU parts and Service Assembly Parts - correct answer True The Easy Restore feature to restore Service Tag licenses, UEFI configuration is available in Rugged Latitude. - correct answer False Overclocking is the process of making a computer or component in a computer operate faster than specified by the manufacturer by modifying the system parameters - correct answer True How many intrusion switches are there in Dell Precision Tower 7920? - correct answer 1 Before replacing any hardware, what is the recommended solution for the BSOD or system freezing? - correct answer Reset the DIMMS Swapping the DIMMS Check cable connections Update BIOS and Drivers In a Precision Rack, one PSU is faulty and other one is fine. After hot plugging the new PSU, it starts to blink green and turns off. What do you think is the cause? - correct answer PSU has Firmware/Voltage mismatch In Alienware systems, errors are indicated via the tricolor Power Button LED. - correct answer False
Select the statements which are right concerning RAID 5 - correct answer It strips the data among the drivers with a parity bit It can sustain up to one drive failure Minimum number of drivers is 3 If an Edge Gateway is Blinking green after the diagnostics, what does it indicate? - correct answer ePSA Pass Under what scenarios can we clear the NVRAM by moving the PSWD jumper to the RTCRST pins? - correct answer No Post No Video iDRAC stands for: - correct answer Integrated Dell Remote Access Controller NIC Activity LED is off and Link indicator is green. This indicates NIC is connected to a valid network at its maximum port speed but data isn't being sent/received. - correct answer True What is not an example for IoT application? - correct answer Household furniture Which RAID mirrors the data between the two drivers without parity? - correct answer RAID 1 Diagnostics LED error codes in an Alienware Notebook don't always supersede the LED indication for Low Battery indication - correct answer False In an Alienware Notebook, which indicator is used to communicate error codes? - correct answer Power button or battery LED BOSS stands for: - correct answer Boot Optimized Storage Solution The following items are unaffected by the RTC reset: - correct answer Service Tag