Copying, reproduction, dissemination, transmission, use, modification, sale, publication, distribution or any other use of this document, in whole
or in part, is prohibited without prior authorization from IBM. 1
Video transcript – Command prompt - Installation SaaS
Time
Narration
00:09 -00:18
Hello and welcome to another video! Today, you will learn how to install the
SaaS version of IBM Robotic Process Automation through the Windows
command prompt.
00:19-00:32
There are two methods to install IBM Robotic Process Automation: using
the setup wizard or using the Windows command prompt.
One important thing to mention is that the Windows command prompt method
supports bulk installation on multiple computers at once.
00:33-00:37
So, let’s get into it, I am going to start the installation through the Windows
command prompt.
00:38-01:29
To install the SaaS version through the Windows command prompt, you must
follow the following structure:
1. Enter the Studio executable.
2. Then enter the parameter Bar, exenoui, to disable the graphical
user interface.
3. Enter the Bar parameter, qn, to enable the silent mode. And the
parameter installlevel= 1 or 4 to set the type of installation.
