ECE 001 Final Report and Presentation Format
Final Written Report Format:
Each team must submit one final report.
All the reports must be typed in Word Perfect or MS Word.
Neatness and consistency are important virtues. You must also organize your report
according to the sections below.
1. Title of report
2. Group Information
(a) Group picture
(b) Team member names in the caption of the picture: identifying each student
from left to right
(c) Optional: Team member picture
(d) Group Number
(e) Optional: Name of Team
(f) Optional: Name of Robot
3. Objective of the project
4. Resources needed to create the robot
(a) Parts List (listing of parts used, e.g. handyboard, # of motors, sensor types)
(b) Program Listing (complete source code listing with explanatory comments,
e.g. why counter variables and their limits were chosen, etc.)
5. Procedures to implement the robot
(a) Why you chose robot design (treads/wheels, speed/high vs. low – why?)
(b) How you broke up the team (software designers vs. robot builders)
(c) Order of development (small hardware prototype, small software prototype,
how you extended into full fledge program)
6. Challenges faced while implementing the robot
(difficulties writing the program, difficulties with friction, difficulties with
handyboard, motor strength, as well as successes you are proud of, etc.)
7. Biomedical Experiment Discussion
(a) Background on centrifuge
(b) Explanation of experimental setup (brief discussion)
(i) picture
(ii) source code (Program Listing)
(c) Results obtained (spreadsheet, turn time needed for separation, etc.)
