Download Firefighter State Exam | Questions and Verified Correct Answers| Latest Version 2026 202 and more Exams Advanced Education in PDF only on Docsity!
Firefighter State Exam |
Questions and Verified Correct
Answers| Latest Version 2026-
2027| 100%Score.
Which of the following concepts dictates that each fire fighter answer to only one supervisor? A) Span of responsibility B) Organizational accountability C) Unity of command D) Delegation of duty C) Unity of command Which of the following national organizations develops U.S. codes and standards dealing with fire protection? A) EPA B) NIOSH C) OSHA D) NFPA D) NFPA Using technology to make buildings and products safer is an example of what type of CRR strategy?
A) Education B) Engineering C) Enforcement D) Economic Incentive B) Engineering At least one member of every interior firefighting team should be equipped with this specific instrument for communication A) two-way radio B) A pager C) A strobe D) A whistle A) two-way radio What is the first step in the process of response? A) Checking PPE B) Mounting apparatus C) Starting the engine D) Belting in A) Checking PPE When, in the sequence of tasks required at a working structure fire, does controlling the utilities usually occur? A) Once overhaul is complete B) Immediately prior to overhaul
C) Fifty pounds During strenuous firefighting, how does the realistic use time of an SCBA compare to its rated use time? A) The rated time is considerably less. B) The rated time is somewhat less. C) The two times are usually very close. D) The realistic time is about half the rated time. D) The realistic time is about half the rated time. When should fire fighters use the purge valve on SCBA? A) When the tank is near empty B) When the SCBA cylinder contains air but no air is coming into the mask C) When the air supply is contaminated D) When the PASS device is going off B) When the SCBA cylinder contains air but no air is coming into the mask What should telecommunicators do if a caller begins shouting or becomes argumentative? A) Hang up immediately; public safety personnel are not required to receive abuse. B) Sternly advise the caller to calm down and behave properly. C) Engage the caller on his/her own terms; often a good exchange of anger relieves the fear and stress of the caller. D) Remain calm and professional. D) Remain calm and professional.
What is it called when picking up a particular telephone causes an immediate ring to a particular other phone, with no other choice? A) direct line B) A field pack C) A negotiation set D) A Phillips phone A) direct line A talk-around channel: A) uses a repeater system. B) is designed to talk over long distances. C) uses multiple frequencies. D) transmits and receives on the same frequency. D) transmits and receives on the same frequency. What is the term for the process where a solid, due to heat, breaks down to produce a flammable vapor? A) Oxidation B) Combustion C) Pyrolysis D) Conflagration C) Pyrolysis
B) Thermal equilibrium C) Thermal temperance D) Rollover A) Thermal layering What danger is suggested by the observation of smoke puffing in and out of a structure? A) Impending structural collapse B) The presence of backdraft conditions C) Weak structural roofing members D) Untempered, unreinforced glazing in windows B) The presence of backdraft conditions What is the vapor density of air? A) 0 B) 1 C) 14. D) 21. B) 1 What is the first step in reading smoke? A) Determine what is influencing the key attributes. B) Predict the event. C) Determine the rate of change.
D) Determine the key attributes of smoke. D) Determine the key attributes of smoke. What is the measure of how readily a material will conduct heat? A) Thermal conductivity B) Thermal combustibility C) Thermal connectivity D) Thermal reducibility A) Thermal conductivity What does a CMU contain? A) Void space B) Steel reinforcing rods C) Joinery instructions D) Explosives B) Steel reinforcing rods Select the true statement about steel A) It is not very strong in either tension or compression. B) It is very strong in tension only. C) It is very strong in compression only. D) It is very strong both in tension and compression. D) It is very strong both in tension and compression.
A) length B) connections C) width D) height B) connections What is the finishing material that is a thin concrete surface that can be such used over brick, tile, or wood? A) Brick veneer B) Wood siding C) Stucco D) Wood shake shingles C) Stucco Portable fire extinguishers have two primary uses. What is one? A) To defuse possible backdraft conditions B) To reach rollover gases C) To extinguish incipient fires D) To provide emergency air C) To extinguish incipient fires Which class of fire involves combustible metals? A) K B) A
C) B
D) D
D) D
Fire extinguishers are rated for their ability to control a specific type of fire and: A) ease of use. B) reach of agent. C) overall weight. D) ability to prevent rekindling. D) ability to prevent rekindling. When determining what risk classification to assign a certain building area, which two factors contribute? A) Direction and density of pedestrian traffic flow B) Elevation and configuration of the given area C) Volume and pressure capacity of sprinklers D) Amount and type of combustibles present D) Amount and type of combustibles present What is one disadvantage of CO2 extinguishers compared to other extinguishers? A) Electrical conductivity B) Expensive chemical inside C) Short discharge range D) Messy residue
In addition to prying, what can a flat-head axe be used for that a pick-head axe cannot? A) Ventilating a roof B) Prying an outward-opening door C) Striking another tool D) Prying an inward-opening door C) Striking another tool Which type of saw is used for cutting curves in wood? A) coping saw B) A carpenter's handsaw C) A hacksaw D) A circular saw A) coping saw Which body of rules, regulations, or guidelines usually addresses where and how to stage tools at a fire scene? A) The department's own SOPs B) The applicable NFPA standard C) The manufacturer's recommendations D) The state fire and building codes A) The department's own SOPs After cleaning, what is the anti-rust procedure for metal tools? A) Apply a light coating of benzene.
B) Dry them thoroughly. C) Coat them with a thin layer of soap. D) Rub a little dirt onto the metal surfaces. B) Dry them thoroughly. How are life safety ropes categorized? A) For knot or for no knots B) For rappelling or for steady lowering only C) For static or dynamic loads D) For technical or general use D) For technical or general use The terms used to describe how a rope reacts to an applied load are dynamic and: A) vibrant. B) fixed. C) static. D) inert. C) static. When hoisting tools, which device should be used to prevent damage to a rope when it must be dragged over rough edges, such as a roof edge? A) marlin spike B) A hose tool C) An edge protector
Fire escape rope is to be used in which of the following circumstances? A) Emergency self-rescue from an immediately hazardous environment B) Life safety rescues involving two persons C) Water rescues involving multiple individuals D) Hoisting and lifting tools A) Emergency self-rescue from an immediately hazardous environment Before beginning any forcible entry, which reminder phrase should fire fighters keep in mind? A) Two's company, three's a crew. B) Without the hose, the fire grows. C) Try before you pry. D) Break a door, hit the floor. C) Try before you pry. What happens if the wrong tool is used on case-hardened steel? A) The metal can be cut through much faster than anticipated, resulting in personal injury. B) The tool can break and people can be injured. C) The metal can ignite or the powder dust from the cutting can explode. D) Nothing happens, but time is wasted. B) The tool can break and people can be injured.
Where should a fire fighter stand when breaking windows during forcible entry? A) Windward side of the window with the hands below the break B) Windward side of the window with the hands above the break C) Leeward side of the window with the hands below the break D) Leeward side of the window with the hands above the break B) Windward side of the window with the hands above the break What is the term used to describe the crosspiece that spans the two beams of a ladder? A) Dawg B) Block C) Rung D) Rail C) Rung What does a heat sensor label do on a ladder? A) It reports the highest temperature in which the ladder can be safely used. B) It changes color when exposed to a specific degree of heat. C) It attests to the heat treatment the ladder underwent during construction. D) It reports what the ambient temperature currently is. B) It changes color when exposed to a specific degree of heat. Which NFPA standard sets the minimum performance standards for apparatus referred to as either "aerial ladders" or "elevating platforms"? A) 1868
D) A flat raise D) A flat raise During a search, spindle-style furniture legs might indicate what type of furniture? A) Crib B) Couch C) Bunk bed D) Reclining chair A) Crib Which condition is the victim in when the exit assist is appropriate? A) Unresponsive and unable to walk B) Unresponsive but able to walk C) Responsive but unable to walk D) Responsive and able to walk D) Responsive and able to walk Where does the victim's arm go in the one-person walking assist? A) Around the rescuer's waist B) Linked in the rescuer's arm C) Around the rescuer's neck D) Across the victim's chest C) Around the rescuer's neck
A thorough size-up of each fire is important to develop a plan for rescue, fire suppression, and: A) transitional fire attack. B) exposure protection. C) overhaul. D) ventilation. D) ventilation. When considering the various types of ventilation, the easiest type to use is: A) doors. B) windows. C) skylights. D) the roof. A) doors. What is the term for the open space between the ceiling of the top floor and the underside of the roof of a building? A) Roof chase B) Cockloft C) Head space D) Mantle B) Cockloft
