Firefighter Testing Outline Exam 3| Questions and Verified Correct Answers| Latest Versi, Exams of Safety and Fire Engineering

Firefighter Testing Outline Exam 3| Questions and Verified Correct Answers| Latest Version 2026 2027| 100%Score.

Typology: Exams

2025/2026

Available from 07/02/2026

Liquid-M
Liquid-M 🇺🇸

3

(1)

1.7K documents

1 / 110

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
Firefighter Testing Outline Exam
3| Questions and Verified Correct
Answers| Latest Version 2026-
2027| 100%Score.
When rescuing an unconscious child or small adult from a window, how many rescuers
enter the window to assist the victim?
A. 3
B. 1
C. 0
D. 2
D. 2
When cutting through a roof, a firefighter should avoid:
A. removing the built-up material prior to cutting
B. cutting through joists, rafters, or trusses
C. making one large opening
D. using a power saw
B. cutting through joists, rafters, or trusses
Which of the following is an advantage of the flat load?
A. Only four people are required to perform the load
B. It is the best way to load large-diameter hose
pf3
pf4
pf5
pf8
pf9
pfa
pfd
pfe
pff
pf12
pf13
pf14
pf15
pf16
pf17
pf18
pf19
pf1a
pf1b
pf1c
pf1d
pf1e
pf1f
pf20
pf21
pf22
pf23
pf24
pf25
pf26
pf27
pf28
pf29
pf2a
pf2b
pf2c
pf2d
pf2e
pf2f
pf30
pf31
pf32
pf33
pf34
pf35
pf36
pf37
pf38
pf39
pf3a
pf3b
pf3c
pf3d
pf3e
pf3f
pf40
pf41
pf42
pf43
pf44
pf45
pf46
pf47
pf48
pf49
pf4a
pf4b
pf4c
pf4d
pf4e
pf4f
pf50
pf51
pf52
pf53
pf54
pf55
pf56
pf57
pf58
pf59
pf5a
pf5b
pf5c
pf5d
pf5e
pf5f
pf60
pf61
pf62
pf63
pf64

Partial preview of the text

Download Firefighter Testing Outline Exam 3| Questions and Verified Correct Answers| Latest Versi and more Exams Safety and Fire Engineering in PDF only on Docsity!

Firefighter Testing Outline Exam

3 | Questions and Verified Correct

Answers| Latest Version 2026-

2027| 100%Score.

When rescuing an unconscious child or small adult from a window, how many rescuers enter the window to assist the victim? A. 3 B. 1 C. 0 D. 2 D. 2 When cutting through a roof, a firefighter should avoid: A. removing the built-up material prior to cutting B. cutting through joists, rafters, or trusses C. making one large opening D. using a power saw B. cutting through joists, rafters, or trusses Which of the following is an advantage of the flat load? A. Only four people are required to perform the load B. It is the best way to load large-diameter hose

C. Hose loaded in this manner has fewer sharp bends than other loads D. Hose for shoulder carries can easily be taken from the load B. It is the best way to load large-diameter hose Which of the following statements IS CORRECT regarding fire extinguishers and combustible metals? A. All chemical agents need to be applied with a shovel or scoop B. No single agent will control or extinguish fires in all combustible metals C. The agent needs to break the crust that may form over any burning metal to extinguish the fire D. They come in pressurized and handheld models B. No single agent will control or extinguish fires in all combustible metals A common factor with regard to multiple firefighter deaths at emergency incidents is: A. the lack of an organized, effective command structure B. they all involved industrial complexes C. all the incidents occurred during forest fires D. they all occurred in urban settings A. the lack of an organized, effective command structure Which of the following is one of the stages/phases of fire burn? A. Rollover B. Fully developed C. Backdraft D. Initial

What type of listening is required by a telecommunicator to draw out all the necessary information from a caller who may be excited, confused, or dealing with a language barrier? A. Presumptive B. Active C. Selective D. Modal B. Active After a roof has been opened up, the firefighter must: A. remove any natural roof openings B. make another opening on the opposite side of the pitched roof C. ensure the ceiling below the cut is opened D. direct a hose line into the opening C. ensure the ceiling below the cut is opened How are flammability limits and explosive limits related? A. Explosive limits are used to calculate flammability limits B. The two terms are neither mathematically nor conceptually related. C. They are interchangeable terms meaning the same thing D. Flammability limits are used to calculate explosive limits C. They are interchangeable terms meaning the same thing

A load the engineer planned for, or anticipated, in the building design is the definition of a(n) __________ load. A. dead B. concentrated C. impact D. design D. design What type of standpipe is intended for fire department use only? A. Group 5 B. Type II C. Class I D. Level D B. Type II What types of locking devices usually ARE NOT detected by the forcible entry team? A. Mortise locks B. Auxiliary locking devices C. Padlocks D. Rim Locks B. Auxiliary locking devices Which of the following IS TRUE regarding hoisting tools and equipment? A. Use edge roller over sharp edges to prevent physical damage to rope

D. Convection Which of the following IS NOT one of the methods by which water tenders unload? A. Jet dumps to increase flow rate B. Jet siphons to increase flow rate C. Gravity dumping through large dump valves D. Apparatus-mounted pumps that off-load the water B. Jet siphons to increase flow rate Slab doors are constructed in two configurations: A. ledge and framed B. slab and panel C. raised and flat D. solid core and hollow core D. solid core and hollow core When ventilating a building, all of the following procedures can be used by firefighters except __________ ventilation. A. manual B. forced C. horizontal D. vertical A. manual

The MOST IMPORTANT piece of information that the caller gives is: A. the caller's telephone number B. from where s(he) is calling C. the nature of the emergency D. the location of the emergency D. the location of the emergency Adults who try to escape a fire on their own are often found in one of two locations. One of those is: A. in a closet B. in the attic C. near a door D. in the middle of a room C. near a door One of the most useful tools to aid in handling a charged hoseline is a hose: A. jacket B. wrench C. clamp D. strap D. strap The MINIMUM quality of air used for SCBA is:

C. 550-1000 gpm D. 360-460 gpm B. 125-350 gpm During a two-firefighter raise of a single ladder, it is the responsibility of the _________ to determine the proper placement distance from the building. A. incident commander B. driver/operator C. firefighter at the butt (heeler) D. company office C. firefighter at the butt (heeler) What is the term of water-soluble flammable liquids such as alcohols, acetone, and others? A. Polar solvents B. Volatile fuels C. Three-dimensional liquids D. Flammable surfactants A. Polar solvents The type of hose roll that is the easiest to work with is the: A. dutchman B. double donut C. straight/storage D. single donut

D. single donut During _________, conditions in the compartment change very rapidly. A. growth B. rollover C. fully-developed D. flashover D. flashover The tool that is specifically designed to open double doors equipped with panic bars is a(n): A. claw tool B. French curve C. J tool D. opening strip C. J tool Under what circumstances should master stream devices be directed into buildings where fire fighters are operating inside? A. Only when the fire is clearly getting the better of the inside crew B. Only when the whereabouts of every person inside is known to the master stream operator C. Under any circumstances D. Under no circumstances D. Under no circumstances

What are two methods of raising a ladder to the vertical position? A. Rung raise and beam raise B. East raise and West raise C. Manual raise and mechanical raise D. One-person raise and two-person raise D. One-person raise and two-person raise With respect to the forcible entry team, in what direction will a door with exposed or visible hinges move? A. It swings toward the forcible entry team B. When forced, the top swings in, while the bottom swings out C. It can go either toward or away from the team. D. It swings away from the forcible entry team A. It swings toward the forcible entry team An attack that uses the steam-generating techniques of a ceiling-level attack, along with application of the fire stream on a material burning near the floor level, is known as a(n) _________attack. A. blitz B. direct C. indirect D. combination D. combination Steel performs well under:

A. corrosive conditions B. direct flame impingement C. exposure to high heat D. compression B. direct flame impingement What is defined as a systematic way to keep track of the location and function of all personnel operating at the scene of an incident? A. A personnel accountability system B. A grid search system C. A scalar organizational system D. A self-modulating personnel system A. A personnel accountability system Who makes the decision about which type of strategy to use on a given fire? A. Fire Chief B. Fire Investigator C. Safety Officer D. Incident Commander D. Incident Commander Another term for the spread of a fire to exposed buildings is: A. attenuation B. mitigation

C. Forcible entry to gain access to the fire D. Gaining access to the roof for ventilation B. Advancing hose lines to extinguish the fire The chain of command: A. is the pathway of responsibility from the highest level of the department to the lowest B. includes training, safety, finance, and logistics C. includes incident stabilization, life safety, and property conservation D. allows for supervision of five people by one person A. is the pathway of responsibility from the highest level of the department to the lowest In most cases, the contents of a building will be predicated by the: A. geographical area B. occupancy type C. time of day D. construction type B. occupancy type Statement 1: Blades range from large-toothed blades for quick cuts and fine-toothed blades for fine, precise cuts Statement 2: Reciprocating saws are most often used during ventilation Statement 3: Blade guards are designed specifically for carbide tip blades. A. All three statements are true.

B. Statement 1 is true; statements 2 and 3 are false C. Statements 1 and 2 are true; statement 3 is false D. Statement 1 is false; statements 2 and 3 are true. B. Statement 1 is true; statements 2 and 3 are false Which of the following is a recommended practice to prevent thermal fire hose damage? A. Allow hose to remain in a heated area after it is dry, provided the air is a moderate temperature. B. Roll dry hose in a straight roll for storage to keep the liner from drying out C. Keep both the inside and outside of woven-jacket fire hose dry whenever it's not in use, especially if not used for extended periods of time D. Use hot air for only short periods of time when mechanically drying B. Roll dry hose in a straight roll for storage to keep the liner from drying out The __________ carry can be used on a conscious patient. A. two-person B. firefighter's C. leg D. seat D. seat Which of the following is a recommended practice to prevent organic fire hose damage? A. Remove, inspect, sweep and reload hose if it has not been unloaded from the apparatus within the last year. B. Inspect and test hose annually and after possible damage

D. CO2 is not a hazard in an enclosed area C. CO2 does not leave a residue or corrode electrical contacts When drying synthetic rope, keep it: A. in a damp, dark place B. in a cool, moist, sunlit place B. in a warm, dry sunlit place D. out of sunlight D. out of sunlight When carrying a ladder using the low-shoulder method, firefighters will normally face the __________ during the carry. A. heel or butt B. beams C. tip or top D. rungs A. heel or butt The bypass valve on a self-contained breathing apparatus is used: A. to cool the face piece when high heat is encountered B. during hazardous materials incidents C. in emergency situations involving a malfunctioning regulator D. to clear the mask of unwanted condensation C. in emergency situations involving a malfunctioning regulator

Where is the rehabilitation/staging center, usually, at a high-rise fire? A. Outside the fire building B. Two or three floors below the fire C. In an uninvolved section of the fire floor D. In the lobby of the fire building B. Two or three floors below the fire A stream discharging MORE than 350 gpm is known as a/an ___________ stream. A. master B. booster C. solid D. elevated A. master One purpose of a Personnel Accountability System is to: A. help the Fire Chief control sick leave abuse B. keep track of firefighters' salaries C. identify trapped or injured firefighters D. create a job complaint form C. identify trapped or injured firefighters Which of the following is an advantage of metal ladders?