1
/
4
Revit Certification exam test revised version
1.
Which part of the user interface changes according to the
command you are
using?: Option bar
2. Which of the following is an example of subtractive modeling?:
Modeling
a
large
project using voids to create the desired shape
3.
T or F: When using roof by face, you give up the option to input
a manual base offset:
True
4. When placing sun location in revit you should always do the
following:
Use real
world location using a project specific address and relevant settings
5.
What tool allows you to change the wall type from generic 8"
to brick on
metal studs?: Type selector
6.
T or F: you must make wall openings before you can place a
window or
door: False
7.
How are stacked walls commonly used?: When a concrete block or cast I place
concrete wall
is used as base material and a framed wall is intended to sit above it.
8.
T or F: curtain walls can be embedded into plastic wall types.:
False
9. Which of the following methods makes a wall touch and follow the
shape of
the underside of a roof?: Select the wall and use attach top/base
10. To create a flat roof which of the following commands would
you use to sketch the boundary of the roof and to set its thickness?:
Roof by footprint with the
thickness set by the roof type.
11.
T or F: when drawing a roof by footprint in plan view, all
lines must define
slope.: False
12.
T or F: stairs are automatically drawn in revit: all you need
to do is set the base and top constraints and select the
appropriate stair family:
False
13.
T or F: stairs must have an associated bottom level by may
or may not have have an associated top level:
True
14.
T or F: openings in revit should always be placed using the by
