Estude fácil! Tem muito documento disponível na Docsity
Ganhe pontos ajudando outros esrudantes ou compre um plano Premium
Prepare-se para as provas
Estude fácil! Tem muito documento disponível na Docsity
Prepare-se para as provas com trabalhos de outros alunos como você, aqui na Docsity
Encontra documentos específicos para os exames da tua universidade
Prepare-se com as videoaulas e exercícios resolvidos criados a partir da grade da sua Universidade
Responda perguntas de provas passadas e avalie sua preparação.
Ganhe pontos para baixar
Ganhe pontos ajudando outros esrudantes ou compre um plano Premium
catalogo weidmuller 2020 para consultas
Tipologia: Exercícios
1 / 10
Esta página não é visível na pré-visualização
Não perca as partes importantes!
Input Input voltage Input current Input resistance, voltage/current Output Contact assembly Contact material Switching thresholds Hysteresis Max. switching voltage, AC Continuous current Function Temperature coefficient Status indicator General data Configuration Supply voltage Power consumption Current-carrying capacity of cross-connect. Ambient temperature Default setting Approvals Insulation coordination Standards EMC standards Rated voltage Impulse withstand voltage Pollution degree Overvoltage category Clearance & creepage distances Insulation voltage
Dimensions Clamping range (nominal / min. / max.) mm² Length x width x height mm Note
Screw connection Tension-clamp connection
Note
Note
0...20 mA ≥ 100 kΩ / ≤ 110 Ω
2 CO contacts AgNi 90/ 1...90 % (independently for channel 1 and channel 2) 1...10 % (independent for channel 1 and channel 2) 250 V 3 A Open-circuit/closed-circuit principle ≤ 500 ppm/K LED green ON: OK, LED red ON: alarm (per channel)
DIP switch, Potentiometer 24 V DC ± 25 % Typically 1 W both relays picked up ≤ 2 A 0 °C...55 °C Channel A/B: low trip and FAILSAFE CE; cULus; EAC
DIN EN 50178 EN 61000-4-2, -3, -4, -5, - 300 V 4 kV 2 III ≥ 3 mm 2 kVeff / 5 s
Screw connection Tension clamp connection 2.5/0.5/2.5 1.5/0.5/2. 92.4/17.5 92.4/17.
Type Qty. Order No. WAS5 DC/Alarm 1 8543820000 WAZ5 DC/Alarm 1 8543880000
Cross-connector for power supplies and markers – refer to Accessories
5HOD\)$,/6$)(
+\VWHUHVLV
6LJQDOWKUHVKROGKLJKWULS
+\VWHUHVLV
6LJQDOWKUHVKROGKLJKWULS
+\VWHUHVLV
6LJQDOWKUHVKROGKLJKWULS
+\VWHUHVLV 6LJQDOWKUHVKROGORZWULS
5HOD\)$,/6$)(
,QSXWUDQJH
7LPH
,QSXWUDQJH
5HOD\121)$,/6$)(
5HOD\121)$,/6$)(
Input Input current Max. current Making current threshold Input resistance, current Secure off Pulse duration Output Switching current Switching voltage AC / Switching voltage DC Max. switching frequency Contact assembly Contact material General data Configuration Ambient temperature Humidity Approvals Insulation coordination Standards EMC standards Rated voltage Impulse withstand voltage Insulation voltage Overvoltage category Pollution degree Clearance & creepage distances
Dimensions Clamping range (nominal / min. / max.) Length x width x height Note
Screw connection
Note
Note
A
A
4.5...10A DC
11/
12/
100V 0.1A
4.7k Ω
14/
30 A for 10 s ≤ 4.5 A < 50 mΩ ≤ 600 mA min. 1 ms
100 mA / 1 V...100 V1 V...100 V 15 Hz 1 NO contact RH/Rd (Reed contact)*
none 0 °C...55 °C 5–95% rel. humidity, Tu = 40°C, no condensation CE; cULus; EAC
DIN EN 50178 (secure separation) EN 55011, EN 61000-6-1, 2, 3, 4 300 V 6 kV 4 kVeff / 1 min. III 2 ≥ 5 mm (grout encapsulated)
Screw connection 1.5 / 2.5 / 2. 92 / 15.3 / 95
Type Qty. Order No. PAS CMR 4,5...10 A DC 10 8742630000
Cross-connectors and markers - refer to WAVESERIES accessories
Input Input voltage Input frequency Max. voltage Output Max. switching voltage, AC Switching current Continuous current Hysteresis
Temperature coefficient Step response time Repeat accuracy Status indicator General data Supply voltage Reset input voltage, min./max. Pulse duration Configuration
Default setting Ambient temperature Storage temperature Approvals Insulation coordination Standards EMC standards Rated voltage
Impulse withstand voltage
Insulation voltage Overvoltage category Pollution degree Clearance & creepage distances Dimensions Clamping range (nominal / min. / max.) Length x width x height Note
Screw connection
Note
Note
Single-phase
: $6
905
SK
9'&«9'&
9$&'&«9$&'&
6HWSRLQW QF
²
5HVHW
,QSXW
50...60 Hz 260 V AC / DC
250 V 8 A 3 A 24...70 V AC, small = 5 V / large = 10 V, 70–260 VAC, small = 8 V ⁄ large = 16 ≤ 250 ppm/K < 300 ms < 0.3 % of set range LED green = OK / LED yellow/red = alarm status
from the measuring circuit 18 V DC / 30 V DC ≥ 700 ms DIP switch, Potentiometer, Alarm status reset via reset input or button
DIP switches: ON = 1,2,5,8 / OFF = 3,4,6, -10 °C...55 °C -20 °C...70 °C CE; cULus; EAC
DIN EN 50178 EN 55011, EN 61000-6, EN 61326 input/output, input/reset input, reset input/output: 300 V
Input/output, input/reset input, reset input/output: 4 kV
2 kVeff III 2 ≥ 3 mm Screw connection 2.5 / 0.5 / 2. 96.5 / 17.5 /
Type Qty. Order No. WAS5 VMR 1ph 1 8705640000
Markers – refer to Accessories.
Input 1 23 45 6 78 24 V AC/DC...70 V AC/DC n n 70 V AC/DC...140 V AC/DC n n 140 V AC/DC...210 V AC/DC n n n 210 V AC/DC...260 V AC/DC n n Trip High Trip Low Trip n Memory Memory on n Memory out Hysteresis Hysteresis small n Hysteresis large Input voltage AC voltage n DC voltage
(^) = on n (^) = out
(Set permanently to closed-circuit principle)
Operating point
100 %
50 % Input range
Hysteresis
Operating point Hysteresis
Relay/High Trip/Memory out Output Relay/High Trip/Memory on
Time
Reset for output min. 700 ms
Relay/High Trip/Memory out
Relay/High Trip/Memory on
Time
Reset for output min. 700 ms
Reset
(Set permanently to closed-circuit principle.)
Abb.1: Overvoltage monitoring Alarm set to “high trip“ (Set permanently to closed-circuit principle.)
Abb.2: Undervoltage monitoring Alarm set to “low trip” (Set permanently to closed-circuit principle.)
Status indicator Set value not exceeded. Alarm status. Alarm status can be reset because set value has been exceeded.
1
1
0
0 1 0
100 %
50 % Input range
Output
Reset
1
1
0
0 1 0
