© 2011 Microchip Technology Inc. DS51886B-page 1
dsPIC33EP512MU810 and
PIC24EP512GU810
OVERVIEW
The dsPIC33EP512MU810 and PIC24EP512GU810
PlMs (MA330025-1 and MA240025-1, respectively)
are designed to demonstrate the capabilities of the
dsPIC33EP512MU810 and PIC24EP512GU810
devices. The dsPIC33EP512MU810 is a high-
performance 16-bit Digital Signal Controller (DSC) and
the PIC24EP512GU810 is a high-performance 16-bit
Microcontroller (MCU). Both devices include a USB 2.0
OTG interface. Refer to Figure 1 for the device
schematics and Figure 2 for the PIM connector
schematics.
These PIMs can be used for USB as well as non-USB
applications by configuring jumpers on the PIM PC
board. This routing is intended to maximize the
compatibility of the PIM with the Explorer 16
Development Board (DM240001) and its related
PICtail™ Plus daughter boards. For non-USB
applications, jumpers J1 through J5 must be populated
across positions 1 and 2, while jumpers J6 through J10
should be populated. For USB applications, jumpers J1
through J5 must be populated across positions 2 and 3,
while jumpers J6 through J10 should not be populated.
Figure 3 shows the jumper locations.
Table 1 shows the mapping between the 100-pin PIM
interface board and the device pins when the jumpers
on the PIM are configured for USB applications.
Table 2 shows the mapping between the 100-pin PIM
interface board and the device pins when the jumpers
on the PIM are configured for non-USB applications.
In addition, the dsPIC33EP512MU810 PIM can be
used to control the Microchip MCLV (DM330021),
MCHV (DM330023) and MCSM (DM330022) motor
control development boards. The Microchip application
note AN1208 “Integrated Power Factor Correction
(PFC) and Sensorless Field Oriented Control (FOC)
System” (DS01208) requires that an optional zero Ohm
resistor to be installed at location R1.
TABLE 1: 100-PIN TQFP TO 100-PIN PIM FOR USB APPLICATIONS
Device
Pin #
dsPIC33EP512MU810 and
PIC24EP512GU810
Functional Description
PIM
Pin # Device
Pin #
dsPIC33EP512MU810 and
PIC24EP512GU810
Functional Description
PIM
Pin #
1RP127/RG15 —19 AN21/RP89/RE9 19
2VDD 220 AN5/C1INA/VBUSON/VBUSST/RP37/RB5 96
3AN29/PWM3H/PMD5/RP85/RE5 321 AN4/C1INB/USBOEN/RP36/RB4 21
4AN30/PWM4L/PMD6/RP86/RE6 422 AN3/C2INA/VPIO/RP35/RB3 22
5AN31/PWM4H/PMD7/RP87/RE7 523 AN2/C2INB/VMIO/RP34/RB2 23
6AN16/PWM5L/RP49/RC1 624 PGEC3/AN1/RP33/RB1 24
7AN17/PWM5H/RP50/RC2 725 PGED3/AN0/RP32/RB0 25
8AN18/PWM6L/RP51/RC3 826 PGEC1/AN6/RP38/RB6 26
9AN19/PWM6H/RP52/RC4 927 PGED1/AN7/RCV/RP39/RB7 27
10 C1IND/SCK2/PMA5/RP118/RG6 10 28 VREF-/RA9 28
11 C1INC/SDI2/PMA4/RP119/RG7 11 29 VREF+/RA10 29
12 C2IND/SDO2/PMA3/RP120/RG8 12 30 AVDD 30
13 MCLR 13 31 AVSS 31
14 C2INC/PMA2/RP121/RG9 14 32 AN8/PMA6/RP40/RB8 32
15 VSS 15 33 AN9/PMA7//RP41/RB9 33
16 VDD 16 34 AN10/CVREF/PMA13/RP42/RB10 34
17 TMS/RP16/RA0 17 35 AN11/PMA12/RP43/RB11 35
18 AN20/RP88/RE8 18 36 VSS 36
37 VDD 37 69 ASDA1/DPLN/RP73/RD9 69
dsPIC33EP512MU810 and PIC24EP512GU810
100-pin TQFP to 100-pin Plug-In Module (PIM)
Information Sheet
