



Estude fácil! Tem muito documento disponível na Docsity
Ganhe pontos ajudando outros esrudantes ou compre um plano Premium
Prepare-se para as provas
Estude fácil! Tem muito documento disponível na Docsity
Prepare-se para as provas com trabalhos de outros alunos como você, aqui na Docsity
Encontra documentos específicos para os exames da tua universidade
Prepare-se com as videoaulas e exercícios resolvidos criados a partir da grade da sua Universidade
Responda perguntas de provas passadas e avalie sua preparação.
Ganhe pontos para baixar
Ganhe pontos ajudando outros esrudantes ou compre um plano Premium
Qisetion - extreme network - questions
Tipologia: Provas
1 / 6
Esta página não é visível na pré-visualização
Não perca as partes importantes!




The safer , easier way to help you pass any IT exams.
2 / 7
1.What is the default value for the RIP garbagetime setting?
A. 30 seconds B. 60 seconds C. 120 seconds D. 180 seconds Answer: C
2.Given router interfaces 10.0.0.1/24, 10.10.10.10/24, 192.168.0.1/24, and 192.168.255.254/24 on a Summit7i switch what will be the OSPF router ID given the following command: config ospf routerid automatic?
A. 10.0.0.1/ B. 10.10.10.10/ C. 192.168.0.1/ D. 192.168.255.254/ Answer: D
3.Which command would you use to configure VLAN corporate with IP address 192.168.0.1/16?
A. config vlan corporate ipaddress 192.168.0.1/ B. config ipaddress corporate vlan 192.168.0.1/ C. config ipaddress 192.168.0.1/16 vlan corporate D. config ipaddress 192.168.0.1/16 corporate vlan Answer: A
4.VLAN aggregation allows multiple sub-VLANs to share a single IP subnet.
A. True B. False Answer: A
5.How do you disable Split Horizon?
A. disable rip splithorizon noadvertise B. unconfig rip splithorizon C. disable rip splithorizon D. unconfig rip splithorizon noadvertise Answer: C
6.Name a relative route priority that cannot be altered? __________. Answer: direct
Get Latest & Valid EW0-100 Exam's Question and Answers from Freecram.net. 1
The safer , easier way to help you pass any IT exams.
3 / 7
7.Exhibit:
Given this display, how would you find information similar to the SHOW SWITCH command?
A. Click on STATISTICS, then SHOW, then SWITCH. B. Click on STATISTICS, then SWITCH, then SHOW. C. Click on STATISTICS, then SHOW. D. Click on STATISTICS, then SWITCH. Answer: D
8.Internal routers within an OSPF area are either DRs, BDRs, or __________. Answer: ODR
9.Which ExtremeWare feature permits ESRP to increase the number of protected VLANs by placing them under the control of a master VLAN?
A. ESRP groups B. ESRP domains C. ESRP host attach D. None of these. Answer: B
10.STPDs s0, s1, and s2 have been created. How would you activate only s1 while leaving the other STPDs inactive?
A. enable stpd s
Get Latest & Valid EW0-100 Exam's Question and Answers from Freecram.net. 2
The safer , easier way to help you pass any IT exams.
5 / 7
A. True B. False Answer: B
16.Which of the following routes will be used to forward a frame to 192.168.1.174?
A. 192.168.1.0/ B. 192.168.1.128/ C. 192.168.1.128/ D. None of these. Answer: C
17.If a packet to be forwarded does not match existing flow information in the ASIC route cache, the packet is queued to the __________ for route processing.
Answer: cpu
18.In RIP, poison reverse means that:
A. A route is not advertised to the interface from which it was learned. B. A route is advertised as unreachable to the interface from which it was learned. C. Traffic whose source interface does not match the routing table is blackholed. D. None of these. Answer: B
19.RIP version 2 uses a composite metric that includes link speed and delay.
A. True B. False Answer: B
20.Unlike VRRP, the Extreme Standby Router Protocol provides redundancy at both the data link and network layers.
A. True B. False Answer: A
21.__________ allow(s) multiple VLANs to be controlled by a single ESRP instance.
A. ESRP domains B. ESRP groups C. ESRP host-attach
Get Latest & Valid EW0-100 Exam's Question and Answers from Freecram.net. 4
The safer , easier way to help you pass any IT exams.
6 / 7
D. None of these. Answer: A
22.Extreme Networks "I" series switches have this many queues per port. __________. Answer: 8
23.QoS policy is applied _____ in an Extreme switch.
A. per port B. per queue, per port C. per queue D. None of these. Answer: B
24.Without QoS, all packets are allowed equal access to an egress port.
A. True B. False Answer: A
25.Which of the following is not advertised in an OSPF Link State Advertisement?
A. Costs B. Link utilization C. Router interfaces D. Neighbor information Answer: B
26.A VLAN can be a member of up to 64 STPDs. A. True B. False Answer: B
27.What type of area is used to limit external routes?
A. Stub area B. Normal area C. Backbone area D. None of these Answer: A
28.All OSPF routers in the same area must have the same LSDB.
A. True
Get Latest & Valid EW0-100 Exam's Question and Answers from Freecram.net. 5